Can't make a connection between Apple TV and Epsom projector?

When i set this up the screen opens fine for about 5 seconds (apple icon visible) but then disappears and subsequently blinks between a blank screen and the default projector home screen. The epsom projector doesnt have hdmi so i use a VGA adapter to connect the Apple TV to the vga cable. by the way, i have ruled out hardware probs as the vga cable works fine connected to a PC, plus te Apple TV works on a Hdmi projector in the building. has anybody had similar experience, or wisdom on this? thanks

could be 2 things
1. the appletv default use a resolution the projector dont support
solution is to connect it to somethign which does and lower the appletv resolution
2. it's a hdcp issue as VGA don't support hdcp http://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

Similar Messages

Can't make a connection between my tv and laptop

I can make a connection between my laptop and tv as far as being able to view the picture I have as my wallpaper on the tv, but that is all. If I change the wallpaper picture on my laptop it will change on the tv also, but again that is all I can do. That is far as I can get. Just a picture, no icons, no nothing. I have connected using a 15 pin cable on both ends. I have windows xp. There must be a setting in control panel, display or somewhere but I cannot find it.
HELP

Thanks, but that didn't work. Nothing happened. This time however I completely turned off the tv and computer. When I booted up the tv screen showed my password sign in screen. I entered my pass word, The screen momentarily showed my complete desktop, both wallpaper and icons but after about a second or two it blinked and then showed only my wallpaper as before. Puzzling. There has to be an answer somewhere.
Thanks for your help.

How can i make a connection between an application and a database over net

dear sir
how can i make connection between an appliction and a database over internet while the client side appliction is behind proxy and firewall
for example how the live update of norton antivirus makes connection to the data server to make comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

The ability to do so depends entirely on the JDBC driver implementation having some proxy method. It needs to recognize the HTTP or SOCKS proxy and use them to connect, and the firewall and proxy need to allow those specific port connections.
To the best of my knowledge, all of these update utilities, e.g. live update for Netscape, Norton, etc., do not connect directly to the database. As it is, no sane security person would allow a database to be exposed to the Net. Rather, they connect using HTTP or HTTPS, which normally traverses firewalls just fine, to connect to a Web or application server on the far end. That application server then parses the request and retrieves whatever it needs to from the database.
In other words, you cannot have a 2-tier client/server application. You need a 3-tier application:
your client -> Web/app server -> database
where the connection from your client to the Web/app server is over http or https through the firewall and proxies.
Hope this helps.
Avi
dear sir
how can i make connection between an appliction and a
database over internet while the client side
appliction is behind proxy and firewall
for example how the live update of norton antivirus
makes connection to the data server to make
comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

TS3274 not able to make Bluetooth connection between my Ipad and Iphone.

I am unable make Bluetooth connection between my Ipad3 and Iphone 4S.

You can't!
Alternativley you can use DropBox to send items over WiFi (free) or sync both with iTunes and drag & drop items in the Apps tab of each device.
<Edited By Host>

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

Can I make a connection from Apple TV to HD television other than HDMI?

Question:
With only 2 HDMI ports on my HD TV, and the apparent need for 3 -1 for a Blu-Ray DVD player, 1 for connection to Apple TV, and one to connect to HD cable modem, I feel stuck.
What do I have to do, how much will i be giving up?
Is getting a cable box with two HDMI connectors the solution?
Or other equipment?
Tthanks,

Paulrichard wrote:
With only 2 HDMI ports on my HD TV, and the apparent need for 3 -1 for a Blu-Ray DVD player, 1 for connection to Apple TV, and one to connect to HD cable modem, I feel stuck.
Cable modems do not have HDMI ports and do not connect to tvs. Maybe you mean a cable set-top box?

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

Can't establish ftp connection between a Xserve and a PB

We want to use a Xserve (Mac OS X Server 10.4.8) to provide webhosting, but experience problems in establishing ftp connections using a PowerBook (Mac OS X 10.4.8).
On a WinXP-based notebook using the same Internet connection, anything works fine, just not on my PowerBook.
This is what happens when trying to establish a ftp connection (via terminal):
I type: ftp [email protected]
Returns:
220 star1.local FTP server ready.
331 Password required for user.
I provide the password, anything looks fine, get this output:
230 User starenterprise logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>
Okay, now I want to see what files are in the directory using "dir" command ("ls" brings same result). This output is shown:
502 'EPSV': command not understood.
227 Entering Passive Mode (132,78,123,92,42,115)
Now I can either press CTRL+C to escape or when waiting around one minute, then it states this:
421 Service not available, remote server timed out. Connection closed
On a ftp client software like CuteFTP Mac it shows "Can't open data connection" instead of, but result is the same.
I read through some articles I found here, but nothing compared to my problem. Please help.
I should mention one thing Apple's support told me: Since I have the same username and UID on my PowerBook as well as on the xServe, it could bring problems. However I have then added a new user to my PowerBook, result is the same. And Apple's support left helpless so far.

You said: "Not really answered, the problem persists and I now go on and let
Apple work on it again"
As a native English speaker, I must say (and doubt any would disagree) that
your statement implied: "No one here has actually helped me fix this problem,
and now I'm waiting for Apple to fix it"
Please take care to the word "again" I used; this implies that Apple has tried to solve the issue before but failed (in fact, they stated to call me back, but this is weeks ago) and so I posted this here at the discussions.
Unfortunately I only have access to the "free" support (well, free is not the right word when paying 12 cents per minute for the phone call).
And this means (at least I can speak for the German part of Apple) that operators on the phone look at their knowledgebase and sending articles by e-mail; questions going deeper are resulting in a "we call you back" answer. Sometimes they phone back, sometimes not. Sometimes they are helpful, sometimes (or should I say "in most cases") they just give hints or ask me to investing a nice amount into premium support.
Don't misunderstand me in the direction that I demand assistance from this forum - I'm more than gradeful if I get help (and rewarded this always with giving points), it has saved me several times (many, many, many times) for doing time consuming investigations and making trial-and-error experiences by myself. If I cannot get more assistance, well I have to look elsewhere and so be a bit impertinent to Apple's support. Perhaps it helps
You are right, FTP itself works correctly. It even works fine on the WinXP notebook residing at the same LAN as my PB. Therefore the issue is at the PB's firewall very likely (or a strange relationship between two firewalls which seems not to affect WinXP).
But as you indicate, it makes no sense to lower down security just for doing ftp, especially since SSH works well. However since I have no problems doing ftp sessions with other servers, I would be eager to find the reason why it refuses in this case, even this just means feeding my curiosity
So if I come to new insights, I post them here. But I feel that I'll really need your wishes for luck to solve this problem Let's see...

How to make HTTP connection between a midlet and a php server?

As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done

Can't complete facetime connection between macbook pro and iPad

Last week I had to download the latest version of facetime from the mac app store because the beta version (0.9) had expired. After I installed it on my 15" macbook pro (last model that had the removable battery) running the latest version of Snow Leopard 10.6.x, I tried to facetime with my iPad (3rd gen). It would ring, but when I would try to accept the connection, it wouldn't make the connection. I was using the same account/user id on both the iPad and the macbook pro. I added my wife's email address to the mac and selected her address and then was able to connect and I thought my problems were solved. At this time, both the macbook pro and iPad were on the same wifi network.
Fast forward a few days and I'm overseas and trying to facetime with my wife and so I attempt to connect and it rings and she accepts the incoming connection, but then it never connects and I get a message that it failed. She tries to connect to me and the same thing happens - it rings, i touch the button to accept and it says connecting and then never connects. I was able to connect with no issues when she was using her iPhone 4S when I am in London and she is at home on the same wifi network as the macbook pro is on. I had her sign out of my apple account in facetime on the macbook pro and sign in with her apple account that is associated with a completely different email address. We tried to connect and still had the same problem - rings, hit answer, connection fails.
I can also connect with my iPhone 4 to my iPad (both on the same wifi network, data roaming turned off on the phone so I know it is wifi only)
Since I can connect to my iPhone and my wife's iPhone, I'm pretty certain that the problem isn't with the wifi network on either end and it has something to do with facetime on the macbook pro. When I was googling for answers, it seems like this issue isn't an uncommon occurence, but I haven't been able to find any solutions either.

No.
they run entirely different os on entirely different hardware.

HT4437 I just bought an Apple TV. I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system. I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

How to make optical connectivity between Catalyst 4948 and 10K router ?

Hi,
I am Ratheesh P D, network Manager of one project in Motorola. We have one catalyst 4948. Its going to get one 10K router. Our requirement needs optical connection between these two. The document of 4948 says, its compatible with 1000BaseX SFP and 10K is with 1000BaseSX SFP. Could you please tell me how to make these two compatible?

For information regarding the optical connectivity in 4948 cat switch follow the url ,
http://www.cisco.com/en/US/products/ps6021/products_installation_guide_book09186a008023fa89.html
For more information on h/w capability and connectivity of 10 k routers follow the url ,
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/index.htm

Question regarding connections between apple tv and receivers

All of my components run through a Yamaha receiver and then from the receiver directly to a Sharp Aquos tv. Does the apple tv also need to run through the receiver, or can it be connected using an HDMI directly into the tv. And if so, how do I get audio?

Hello W. Churchill, can you help me?
I my case my receiver does not have an HDMI connection, so I did what you said: HDMI connection from the Apple TV (3rd gen) goes directly to the TV and the receiver connected to the Apple TV via an optical audio cable. BUT, there is no sound 5.1 from my speakers! I´m sure it works perfectly because I did de same connection (por and cable) with a DVD Player...
Thanks

There is no connection between apple tv and the remote

i am trying to use the remote control but i dont know if its work or not because the light in apple tv is blinking but no respond from it ?????
what should i do???

here i can supply more details: when i deinstall quicktime only, reboot, and reinstall quicktime from a previously downloaded file, everything works as expected, that is, i can click on an offer within quicktime and in turn itunes will open and will offer that item. - but this will function only about ten times, after that, the error message reported above will block access to any item offered on quicktime.- could this be a virus ? (f-secure and security essentials did not report anything) or could this be a commercial barrier ?

How to make a connection between an application and a Coherence Grid?

Hello,
We're starting with Oracle Coherence.
How do I connect an application (for example running in JDeveloper) to an existing grid?
I used the following tutorial to get started with Coherence.
http://www.oracle.com/technology/pub/articles/vohra-coherence.html?msgid=6521631
Within JDev an Coherence instance is started, data is entered and queried.
Next I'd like to connect this to a running Coherence instance, (started with [Coherence home]\bin\coherence.cmd)
When I start the coherence.cmd and run the application from within JDev, I can see a connection is made
Map (?):
2008-05-13 13:15:24.667 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member(Id=5, Timestamp=2008-05-13 13:15:24.484, Address=10.35.1
4.150:8090, MachineId=10134, Location=process:4612@WBNL71033) joined Cluster with senior member 1
Map (?):
2008-05-13 13:15:24.934 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 joined Service DistributedCache with senior member 5
Map (?):
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left service DistributedCache with senior member n/a
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left Cluster with senior member 1
I am, however, not able to retrieve the data which is entered via JDev.
(1) What do I need to do to distribute the data entered via the Jdev application to the Coherence grid
(2) How can I get access to the data within the Coherence Grid(do I need to to change the Cache, Map or something else)?
Thanks in advance
Regards Leon

Hi Leon,
In order to see the entries created by the sample application within JDev, you will need to do several things:
1. Ensure that at least one storage enabled Coherence node is running, by executing cache-server.cmd at least once (coherence.cmd starts storage-disabled console only).
2. Run coherence.cmd and change to the appropriate cache from the console:
Map (?): cache VirtualCache
(the name should be the same as the one defined in cache-config.xml and Java code)
3. Execute commands against the cache:
Map (VirtualCache): list
This should give you a list of all the entries within a VirtualCache.
HTH,
Aleks

Can't make a connection between Apple TV and Epsom projector?

Similar Messages

Maybe you are looking for