Can't make a partition, even though I completely restored the hard drive.

Hello. I think it'd be best I explain it in full detail to get the most accurate answer. It's a bit long, so please bear with me.
I have a Macbook Pro, late-2009 edition and OS X Lion. (Version 10.7.2)
I want to partition my drive in order to have Windows 7 in my computer. My friend, who was helping me, said that I couldn't immediately make a partition because according to what he checked in my computer, I had made a partition before and it was still there.
Now the backup [haha, pun] of the latter is that my other friend, earlier in the year, had put a Windows virutal machine in my computer and made a small partition of it. I didn't want it anymore, however, and deleted it from my computer. I did, however, follow my friend's steps to appropriately delete the virtual machine and the partition beforehand, but it doesn't seem to be the case...
Anyway, back to the present. My friend thought it would be best to pretty much restore and reinstall my OS Lion. After Lion was reinstalled, I restored all of my files through a Time Machine backup I did the day before.
When he went to go to Boot Camp and make the partition, it had the following window pop up:
However, when we checked disk utility about the format, this is what it says:
You can see that the format is indeed Mac OS Extended (Journaled).
I'm led to believe that the previous partition is still in my hard disk (Although it shouldn't be) and it's causing problems. But honestly, I'm at a loss on what to do right now.
If anybody could give me some kind of answer, that would be lovely. Thank you.

when you installed or upgraded to Lion it should have created Recovery partition.
In some cases just shrink your "Mac HD" repair and then stretch back out.
Boot into Recovery Mode and check the drive and perform the above.
http://support.apple.com/kb/HT4718

Similar Messages

Do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

Ok, well go and grab a small 2.5" hard drive enclosure so you can put the new drive in & temporarily use it like an external hard drive.
Download Carbon Copy Cloner or Super Duper and make a bootable clone of your current HDD on the new HDD.
Once that's done you can test the clone by booting from it. To do this hold Optioni while booting to select the external (new) drive. If everything looks ok, you can go ahead and swap over the HDD's.
So much easier.

How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

How can I transfer my old iTunes (playlists and all) from the hard drive of my old dead computer to the iTunes of my new one?

So my old PC died before I managed to back up my iTunes library onto DVDs. I do however have the hard drive from the old PC with all the program files, files and folders on. I also have the iPhone 4, which has my top rated playlist on but that only holds about 20% of my entire music collection on.
Is it possible to somehow find all my old iTunes music, videos, playlists, podcasts etc and transfer it into the iTunes on the new PC without losing anything?
Thanks for reading :-)

im trying to do the same. how do you
Copy the entire iTunes folder from <User's Music> on the old machine into <User's Music> on the new one?
im sorry i am totally inept when it comes to this stuff. can you walk me thru the steps to copy? please

Can I make a LR web gallery in local storage (my hard drive)

All,
I want my laptop to function as a quick viewer for showing a portfolio.
I thought I'd experiment (for the first time) with the web creation options in LR5.3, but at "Save" time point all materials, files, links, etc. inside my own hard drive or SSDs on the laptop. There are times when I want to show someone images without depending on a connection to the Internet. I have web-delivered services I can use but I am looking for the quickest appearance and on the screen and some control over navigation (able to organize the materials). I want ease of replacement or addition of images from LR as circumstances dictate.
I own Dreamweaver from CS4, and have a little experience setting up links. Perhaps I would have to do some work in Dreamweaver?
My "real" portfolio is a WordPress.org install hosted at my ISP and I might even pay to have that template duplicated on this "local web server" but that's a different question.
Is this going to cause unexpected problems?
Jonathan7007

I like PDF for this. You can default a PDF document to open full-screen and while the transitions are not infinitely programmable, they are perfectly workmanlike. So one can construct a nice experience IMO. And it's a single file.
OTOH, one thing I have sometimes found when exporting Website to local disk: browser security settings may block certain kinds of scripting or automation, such as Javascript or Flash, from operating - that would have worked fine if accessed instead, from an external web server.
For example, I encountered this yesterday with PTGui's web Flash pano viewer. That needed to be explicitly identified as OK, within the local Flash settings, when running locally.
AFAICT, this is because the scope of the damage that a locally stored file might do, is much greater - purely due to the user permissions it inherits, according to its privileged location. A file downloaded from an externally stored website, will have been more safely quarantined and limited as to the potentially malicious things it can attempt - so will be more readily permitted to go ahead and execute.

How can I make my iPhone 5 automatically transfer photos to my hard drive AND save them in date-named folders?

My old iPhone (2 I think) was set to automatically copy pictures to my hard drive and it categorized them in dated folders... I don't know how I did this but I need to do it again with my new iPhone 5. Suggestions?

If you install Pacasa, you can set up Picase to that all you have to do is click on a button to automatically import the photos into a dated-today folder. You can also configure it to automatically delete the imported photos after importing.

Is there a way I can get the "Free Space" back without completely restoring my hard drive?

Hi!
After having a terrible experience with Windows 8.1 on Boot Camp (Windows would always fail to boot), I tried restoring my partition with the Boot Camp Assistant and it would not work. Shortly after, I went to the Disk Utility to restore the Boot Camp partition and it was just "Free Space". I have Googled many different solutions, and am not sure what exactly to do. If possible at all, I would just like to know if there is any way to get back the "Free Space" without having to retire my entire hard drive.
Here is a screenshot of my Disk Utility...

Enable Disk Utililities Debut menu by entering the following command in the Terminal window followed by the Return or Enter key:
defaults write com.apple.DiskUtility DUDebugMenuEnabled 1
Then select the Show Every Partition option in that menu:
That will give you the following in the left hand pane:
Click on each of the icons and you'll get the capacity of each volume and the used/free space on the working volume (Toad Hall in the screenshot).

Script Alert: can't find .js files even though they're in the folder that the program looked in to?

I'm new to the whole After Effects community and I am currently using it for a project.
I followed a tutorial by Mt. Mograph on youtube and I downloaded the script "Ease and Wizz".
I have it as a panel and all, but every time I attempt to apply my desired expression, a popup box says that there is a script alert and it can't find the file for the expression.
Is there something that I'm doing wrong? I have tried to remove the script and download it again, but nothing has worked for me.

Try to copy "easingExpressions" folder that came with the script into this folder:
C:\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\Scripts\ScriptUI Panels\

I can only install trial PS even though I paid for the photographers package of cc

So I just had a HELL of a time installing cc that I paid for over a month ago. After I finally got CC working, I went to download PS it worked fine until I realized it was only the trial version. So I removed it. I noticed that the only option I have for PS is "try" not "install" am I missing something here? I saw a few others had this issue with no clear answer on how to resolve it, I have a mac

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Can I make my airport time capsule into ONLY a external hard drive?

I currently live in Japan and we recently bought a wireless plan through a Japanese company which provides their own modem. You basically connect this modem into the power and WHALA instant internet. It does not allow me to use my airport as router, but I still need to back up all my info since i only have a mini mac which hardly has space, into my time capsule. I really want to keep my time capsule because eventually we will move back to the states and I know i'm going to be right back on it.

As long as the router has ethernet ports you are fine.
Plug the TC WAN port into the router and set the TC to bridge mode .. all will be good.
On the other hand if the ISP has provided you a wireless only device you will find it very hard to setup the TC. It cannot readily join a foreign router (non-apple that is).
In this case, plug the TC directly into your mini by ethernet. And then use it without wireless. (keep the wireless for your internet connection). You might need to do a bit of fiddling .. I can give more details on how to do this setup. But I must say for now it is probably easier to put the TC away and just buy a USB drive. Faster, and much more reliable using a directly connected drive.. especially if the Mini is 2012 model with USB3 ports. But even USB2 is faster than TC.

I used the iTunes match workaround and now want to start over, but I am being told I have exceeded the limit even though I completely cleared the match cloud, mindful of the 1000-delete-at-a-time limit....what should I do?

I have over 25k songs in iTunes. I originally tried the "create a second library" solution. I reduced to less than 25k songs and successfully ran iTunes match. Then I discovered the limitations of the second library solution regarding adding more music, managing playlists, and turning back on my main library and being greeted with all sorts of problems.
So, I created a blank library, ran iTunes match, and its showed me all of my files in the cloud that had been matched or uploaded. I deleted all of the files, mindful of the 1000 file limit per delete. I have confirmed I have now deleted them all. An iTunes match update says I have no files in the cloud. Perfect.
I reduced my library again, this time using the superior method of just changing the files I do not want to match to voice memos. That is done. I have less than 25 k songs.
I waited 2 days and ran match again. Yikes. It did not let me match or upload anything, and every music files's cloud status just says "exceeded limit," despite the fact that my cloud is devoid of music and I have no access to any music via match.
I am in a limbo where I have nothing in the cloud from match, but I can't add anything because match says I exceeded my limit.
I emailed customer support, and got back a useless email linking me to a very general article about iTunes match. I called customer service and they said this was something the iTunes store people would need to address, and they can only be contacted by email. Sigh . . . .
Any thoughts?
Thanks

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

How can I restore the hard drive to an earlier date

I was wondering if there is a way to restore my computer to factory defaults like when I received my iMac, without a disk? I think it needs a good cleaning. It is running very slow and my web browsers keep freezing as well as skype. It doesn't matter which browser I use either.
Please direct me how to if possible.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Project (movie) not showing up in trash when I delete it from iMovie (version 10.0.4). Thus, I can't figure out how to permanently delete it from the hard drive. I'm running out of hard drive space fast! Any ideas?

I am trying to delete a project (movie) from iMovie (version 10.0.4). I successfully deleted it but it isn't then showing up in my trash items to delete it there. Thus, I'm running low on my storage space. Any ideas?

It's an iMovie Library file that you need to search for. By default iMovie Library files are in the Movies folder.

How can I make iTunes sort on the first word by default, even though that word is "The" or "A"?

How can I make iTunes sort on the first word by default, even though that word is "The" or "A"?
I myself think that (for instance) "A tribe called Quest" should be sorted under "A", not "T".
Now I can edit the sort options manually per track and/or per selection, but I would really like to just kill this "iTunes-knows-how-you-should-sort"-feature in iTunes.
Anyone any suggestion on how to do that?
Thanks

Here is a modified version of one of Doug's Scripts. My modification was to add Sort Name to the list of tags that could be changed. I tried it on a single track and it worked. I recommend backing up your library first. Select the tracks you want to change (or all tracks) and run the script from the Applescript Editor. If it works as intended, save it so you can apply it to newly imported tracks. And, yes, I know this isn't the exact answer to your question, you want to change a preference setting in iTunes (if there is such a setting).
Original script can be forund at http://dougscripts.com/itunes/scripts/ss.php?sp=thistagthattag
Modified script is below. Start up Applescript Editor, paste it into a new window. Start up iTunes and select the tracks to modify. Click Run in the Applescript Editor. Follow the instructions.
(* Put This In That
v2.0 april 22 2008
- runs as universal binary
- adds "Show" tag
- consolidated code
- saved as script bundle
v1.7 October 3, 2006
- adds "Album Artist" as option
v1.6 October 28, 2004
- works around iTunes 4.7 selection bug
v1.5 ('04/1)-- adds "grouping" tag
Get more free AppleScripts and info on writing your own
at Doug's AppleScripts for iTunes
http://dougscripts.com/itunes/
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Get a copy of the GNU General Public License by writing to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
or visit http://www.gnu.org/copyleft/gpl.html
-- CONSTANTS
property allOptions : {"Song Name", "Artist", "Album", "Album Artist", "Composer", "Genre", "Comments", "Show", "Grouping", "Sort Name"}
property my_title : "Put This In That"
global thisTag, thatTag, theNewTags, theOriginalTags, yn
tell application "iTunes"
          if selection is not {} then -- if tracks are selected...
                    set sel to selection
                    set numTracks to (length of sel)
                    set s to "s"
                    if numTracks is 1 then set s to ""
                    display dialog "The data from one tag REPLACES the data in another tag in all the selected tracks, with option to delete data in first tag." & return & return & (numTracks & " track" & s & " selected.") buttons {"Cancel", "Continue"} default button 2 with title my_title giving up after 30
                    if gave up of result is true then return
                    my choose_this_tag()
                    my choose_that_tag()
                    set yn to (button returned of (display dialog "Delete data in " & thisTag & " afterwards?" buttons {"Yes", "No"} default button 2 with title my_title giving up after 45) is "Yes")
                    set oldfi to fixed indexing
                    set fixed indexing to true
                    repeat with t from 1 to numTracks
                              tell contents of item t of sel
                                        set theOriginalTags to {get name, get artist, get album, get album artist, get composer, get genre, get comment, get show, get grouping, get sort name}
                                        set theNewTags to theOriginalTags
                                        my do_put()
                                        set {name, artist, album, album artist, composer, genre, comment, show, grouping, sort name} to theNewTags
                              end tell
                    end repeat
                    set fixed indexing to oldfi
          else
display dialog "No tracks have been selected." buttons {"Cancel"} default button 1 with icon 0 giving up after 30
          end if -- no selection
end tell
to choose_this_tag()
          tell application "iTunes"
                    set n to (choose from list allOptions with prompt ("Select a tag to get data from:") with title my_title)
                    if n is false then error number -128
                    set thisTag to (n as text)
          end tell
end choose_this_tag
to choose_that_tag()
          set o to {}
          repeat with t in allOptions
                    if (t as text) is not thisTag then copy t to end of o
          end repeat
          tell application "iTunes"
                    set n to choose from list o with prompt ("Use data from the " & thisTag & " tag to REPLACE data in...") with title my_title
                    if n is false then error number -128
                    set thatTag to n as text
          end tell
end choose_that_tag
to do_put()
          try
                    repeat with i from 1 to (length of allOptions)
                              if thisTag is (item i of allOptions) then
                                        set thisTag_sto to (item i of theOriginalTags)
                                        exit repeat
                              end if
                    end repeat
                    repeat with i from 1 to (length of allOptions)
                              if thatTag is (item i of allOptions) then
                                        set (item i of theNewTags) to thisTag_sto
                                        exit repeat
                              end if
                    end repeat
                    if yn then
                              repeat with i from 1 to (length of allOptions)
                                        if thisTag is (item i of allOptions) then
                                                  set (item i of theNewTags) to ""
                                                  exit repeat
                                        end if
                              end repeat
                    end if
          end try
end do_put

Can't expand my data partition even though there's free space on the drive

Hi there
I recently purchased a 120gb SSD to put in my mac mini. In preparation for this, I created a second partition on my drive as a data drive where I will store things in order to make a time machine backup with the 120gb drive. Everything went as planned, except now, I cannot expand my data partition to use the whole disk. Below is a screen capture of what I'm talking about:
To accomplish putting my OS on only 120GB of hard drive, I've made symbolic links for most of the folders in my ~/ folder
This is what the ~/ Folder looks like on my Macintosh HD partition
This is where these files are actually located
As far as I can gather, the only way I can combine these partitions now is to re-format the entire drive, which as you can see would cause me many problems.
Does anyone know how to expand a partition "upwards" for lack of a better term? I'm fairly new to Mac, so any help would be appreciated
Thanks!

Unfortunately, there is no way to expand the partition upwards. As you noted, you would need to either start afresh, or simply find a good use for the first partition.

Can't make a partition, even though I completely restored the hard drive.

Similar Messages

Maybe you are looking for