Can't make Airport Extreme router work with non-Apple device

I am trying to help a friend who has a PC (Windows 7) that has a wired Ethernet connection to his girlfriend's Airport Extreme router. He wants his Internet-capable Blu-Ray player and her IPad to wirelessly access the Internet via the Aiport Extreme router, with both the Blu-Ray player and the IPad's Internet access protected by WPA-2 encryption (both devices are capable of WPA-2). How do I do this?
Here are the problems we've run into:
1) The Airport Utility for Windows (5.6.1) has been installed on the P.C., and we've used it to update the firmware on the Airport Extreme router. However, after we followed the Aiport Utility instructions to set up the network, all the router wanted to do was look for an Apple device. His girlfriend and her IPad are out-of-town right now, so the only device within range was the Blu-Ray player, and the router did not see it. Not only that, but almost all the menu options on the Airport Utility were "greyed out" (unusable), except for "Configuration." I am very troubled by the fact that the Airport Extreme router seems to want to look only for Apple devices.
2) In order to get Internet access for his Blu-Ray player for the time being, my friend pushed the "reset" button on the Airport Extreme router, and he can now use his Blu-Ray player for Netflix and other Internet streaming options. However, the Blu-Ray's wireless Internet access is an unencrypted connection, and the Airport Extreme router is displaying a flashing amber light -- not a good situation.
3) Although I know his girlfriend could access the router via her IPad when she returns, she is French-Canadian, and her IPad operates in French. I happen to know some French, but I have enough trouble trying to understand wireless networking terminology in English without having to try to figure out the equivalent terms in French. Thankfully, the Airport Utility for Windows on his P.C. is in English, so that's what we've got to use to solve this problem.
I have profound respect for Apple products, but I'm a Windows/Linkysis router guy, so that's why I'm stumped. Can anybody out there help me?

Which model of the AirPort Extreme Base Station (AEBS) do they have? What is the version of firmware that you updated it to?
By default, the AEBS will broadcast an unsecured Wi-Fi network with a network name (or SSID) of something like Apple Network NNNNNN. This would be similar to a Linksys when first powered-up.

Similar Messages

I can't get airport extreme to work with iPad

I can't get airport extreme to work with iPad

Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

How can I connect Bluetooth in iPad retina with non apple devices ?

How can I connect Bluetooth in iPad retina with non apple devices ?

What devices?
The iPad can only pair with earphones, speakers and keyboards.
It cannot directly pair with other phones or computers for file transfer or other operations.
Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair.

Airport extreme not connecting to non-apple devices

Hi, I just installed a airporte extreme to serve as my home router (normal home network stuff). My set-up is a cable modem to the extreme to an iMac. The internet connection works, the wifi also works since I have a MacPro that works fine. The issue is I can't get non-apple devices to read the wifi signal. I have a sonos sound system and a Canon wifi printer that both worked fine with the old router (linksys), but with the extreme installed I can't get the signals to be recognized. This seems like an airport set-up issue, any advice on what to look for and check?
My iMac is new and on Mountain Lion; my MacPro is a year old and on 10.7.4

I figured it out so perhaps I can help out the next person. I am a novice to technical set-ups so this may second nature to some of you. Basically, what I learned is that the wifi devices that I was trying to set-up all have a internal "memory" and still tries to communicate with previous routers that it was connected to. Therefore, you have to get the devices to forget by powering them down for sufficient time, and take out batteries, so that it is more like a fresh set-up. All is fine now.

Airplay not working with non-apple router

I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
I have another Express hooked to the network via ethernet and everything works fine with that one.
Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
thanks

Factory reset the express, and try to make it join again...

How can iWeb hit counter be made to work with non-Apple server?

How can IWeb hit counter be made to work with non-Apple server?

This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
OT

Am I correct in assuming that Messages cannot communicate with non-Apple devices?

Am I correct in assuming that Messages cannot communicate with non-Apple devices from laptops and or desktop apple devices? From iPhone there seems to be no barriers to this using Messages.

I wonder if Mt. Lion will include texting to "other" devices. For there to be true continuity across platforms this needs to happen.
Right now I am having an interesting thing happen - even messaging with another Mac User I am getting the red ! on all my messages sent from my mac. Yet he is gitting them. I am assuming this is some kind of beta thing.

HT204387 iphone5 bluetooth won't pair with non apple devices.

iphone 5 won't pair with non apple devices.

Not sure what your trying to connect to via bluetooth, but here are the supported files http://support.apple.com/kb/ht3647

Does iphone supports blutooth sharing with non Apple devices?

Does iphone support sharing with non Apple devices?

For that matter, it doesn't support bluetooth sharing with Apple devices either... except app to app connections that are specifically coded to communicate directly.

New Airport Extreme not working with my Quad Macpro

Hi all-
My Linksys 902.11b router finally died and our household is now completely Mac-based (all with Airport Extreme cards), so I decided to take the plunge and get an Airport Extreme.
2 of the machines on my home's network are doing fine with the router and are getting good speeds - iMac Dual 2.4 (10.5.1) - Both the wired and wireless connections are solid with this machine / Macbook Dual 2.0 (10.5.1) - Both the wired and wireless connections are solid with this machine as well.
I have a Macpro Quad 2.66 machine running 10.4.11. I cannot upgrade to 10.5 yet on this machine since it's being used in my recording studio business and there are known issues with some of my apps and 10.5 at the moment.
The Quad can see the network and has seemingly strong signal from the Airport Extreme BS, but DHCP reception is inconsistent (the machine often eds up using a self-assigned IP for some reason) and IP connectivity in general is inconsistent, even when an appropriate static LAN IP is manually setup. I can often get to a few webpages while using a manually config'd IP, but only with very slow DL speeds and then the connection quickly disappears and drops out entirely.
The AExtreme is setup like this: DSL Modem-->Airport Extreme (config'd with a static IP from my ISP) -->DHCP broadcast dummy IP's to my network. Currently I've not setup any security since I'm in the process of troubleshooting and I don't want to further complicate the situation. Radio-mode on the AExtreme is set to 802.11n (b/g compatible)/Channel 1. I've tried numerous config setups on the AExtreme, but none have helped the situation.
I've also disabled IPv6 on all clients per some reading on the forums of possible issues.
Anyone know what the problem might be? Is it perhaps an issue because the Macpro's using 10.4.11?
FYI, I've also also got an extra Airport Express around that's not being used that could be used as a repeater/wired connection downstairs if broadcast strength is the issue, which seems somewhat unlikely to me. I'm not sure how to config the AExpress to work in this capacity though, so if anyone could point me to a tutorial I'd appreciate it very much.
Thanks in advance.
Lee

I just did some more testing using an app mentioned here on the forums, iStumbler. The app offered these details:
- Signal Strength is between 45%-56%
- Noise is between 24%-41%
- Freq = 2412
- No websites load despite it's seeing the router and saying we've joined it.
I also did a screen capture of the iStumbler's screen in case that's helpful. There were several bits of info I wasn't sure about.
Here's the screen grab: http://www.pbase.com/infiniteposse/image/91793322/original
Thanks again...

Can't Get Airport Express To Work With ATT's Uverse

For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1

+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress.

Airport extreme quit working with mac,dell etc.digital cable the issue? or?

Hi! I had luck here before, so I'm hoping I can find luck again! I'm with my folks, who run a Dell Desktop with WIndows XP Home Edition with cable modem, my Airport Extreme running wireless with my Macbook (listed) and an older than old dell notebook with a wireless card. It has been running fine for the last year.
Now, the new problem: My parents upgraded their phone to digital- so for the first week or so, every time the phone rang, I lost wireless- I presume from interference. On Monday, I was online, and was abruptly cut off. I was not able to get on again for the rest of the day. As sometimes the cable goes out- I didn't think much of it. Until the next day when I couldn't get back online, and the dell desktop could not get on either. My father called in to TW who walked him through several different solutions- none of which gave me wireless. I'm left with an old dell desktop to work on- (I'm a mac girl- I'm going insane). I need the stuff on my macbook- job applications to be sent, book writing for uploads- and my sanity back. Is it possible my Airport Extreme went? Is it the modem itself? Is it the wireless phone interference? My mac will show it can see the network- but can't connect to the internet- Any help at all will be greatfully accepted!
Thank you!!

What is the make/model of the new modem?
Since it sounds like your parents now have VoIP as their phone service, it might more likely be a bandwidth issue as opposed to a Wi-Fi interference issue that you are seeing. This would make sense since the Dell desktop is not able to connect to the Internet either.
One thing to try is to perform a complete power recycle of all the network components to see if this resolves the issue of connectivity. The simpliest method would be to first power everything off. Then, starting with the modem, power it back on; wait 10 - 15 minutes, and then, power-up the AirPort Extreme Base Station (AEBS); wait 5 - 10 minutes. Finally, power on the computers.

How to configure airport extreme to work with Actiontec gt701d modem

I have been trying to set up a new Actiontec modem to work with a new Airport Extreme with no luck. I don't know what the right settings are to get it to work correctly. So far the only way I have been able to get the two to work together is to have the AE connect with ethernet and bridge mode. However with this configuration I can't setup a guest network which I would like to be able to do. I have read some past posts and have tried other configurations but end up either losing internet connection or getting a very slow connection. If anyone has some idea how to get this modem to work with the AE i would really appreciate some advice
Thank you

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

How to configure Airport Extreme to work with Spotify

Issue: Spotify no longer syncs Spotify files to my iMac or my iPhone despite me being a premium member. I've never had an issue with this until this past week. I can't see anything that has changed but I must be missing something. Anyhow...I'm posting this here because I need assistance with my Airport Extreme configuration (not Spotify).
According to Spotify, I am to configure my (Airport Extreme, latest gen) router to allow the following:
The following IP ranges should be open on port 4070:
78.31.8.0/21
193.182.8.0/21
The number 21 is the prefix length.
I've assigned the static IP to my iMac and my iPhone. I've also forwarded port 4070 (Public & Private UDP and TCP) to my iMac's static IP. I also tried it on my iPhone. What I don't know about is how to open the IP Range on that port as stated above.
Any idea where this can be done? Thanks!

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

Will a NAS Plugged into a Non-Airport Wireless Router work with TM?

Will a NAS Plugged into a Non-Airport Wireless-N Router work with TM?
I'm looking for a backup solution for my new MacBook Air and I don't want to spend $200 extra for a Time Capsule when an NAS would do the job.
Any guidance would be appreciated.

No. TM will not backup to any NAS other than Time Capsule

Can't make Airport Extreme router work with non-Apple device

Similar Messages

Maybe you are looking for