Can't make Internet connection

I have been using Airport Express to connect to my stereo system for itunes and radio streaming (with Airfoil) from my desktop with no problem. I thought this set up would also allow me to connect my laptop to the internet. The laptop shows the AE network as an available network and I am able to establish the connection - at least the laptop says I am connected but the browser comes up blank. The desktop shows airport on and broadcasting. I have the Airport Extreme card installed. Thanks for any suggestions.

Hi,
I have an Airport Express set up in my home. I use it to make my broadband connetion and my printer wireless. I have owned it for about six months or so.
The problem I have is that it works perfectly, until it decides to stop connecting to the internet. When I start my computer, there will be no internet connection. When I inspect my Airport Express and broadband modem, they both seem fine, my Airport Express still has a steady green light, but to get it working, I have to unplug it from the power supply and leve it for a few minutes, then reconnect it. It then works fine, for a few weeks till it happens all over again. It is a minor problem, but one that should not happen. Other wireless routers don't operate like this!
At first I thought it was a problem with my Airport Express, till my Dad got one also and the exact same thing happens to him!!
This makes me think it is some problem with Airport Express in general. Is there any updates for the software in the Airport Express itself? A firmware update or something? It is obviously some hardware problem, because all the people I know with one, all suffer from the exact same problem!!!

Similar Messages

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

Can I make a connection to an AS/400 from Discoverer?

Hi,
Can I make a connection to an AS/400 from Discoverer?
tia,
/Guillermo

try this!
create a ODBC Datasource by using the "Microsoft ODBC Manager"
then write following connectionstring "user/pasword@odbc:odbc_source"
maybe it works
good luck
Udo

Can't make a connection from JDeveloper 10g (9.0.5.0) to WebLogic 8.1

I can't make a connection from JDeveloper 10g (9.0.5.0.0) to WebLogic 8.1
When I click "Test connection" JDeveloper 10g writes the following:
Cannot instantiate class: weblogic.jndi.WLInitialContextFactory
Have somebody ever established a connection from JDeveloper 10g (9.0.5.0) to WebLogic 8.1? How to do this?

It connects successfully now. Thank you for the information.
But it does nothing when I try to deploy my J2EE application.
I right-click on Resources -> application.deploy, choose "Deploy to" -> my connection. It starts to do something obscure.
Then I go to the WebLogic console and it shows that there is no my application.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

Can you combine internet connections ?

I've heard that you can combine 2 internet connections in to one faster one, fisrst is this posible with the MacPro using the two gigabit ethernet ports on the back (MacPro Mid 2012)? To do this i've heard that you need a special Router, a Link Aggregation Control Protocol supported one which is about $500, but im not sure if that is the kind of router you need. Anyone who got experience in this who could help me ?
Thanks,

Your Mac Pro 65lb tower with dual Ethernet ports does indeed support Link Aggregation.
It requires a Router or Switch that supports Link Aggregation Protocol, which is an expensive industrial-strength device.
OS X Mountain Lion: Combine Ethernet ports
If you do not have enough of a "mix" of traffic from multiple sources, some readers have complained that their speedup was disappointing. At least in older versions, connections were made in a permanent virtual circuit fashion, assigning each connection to one side or the other, and not using the full bandwidth for a single connection. Fail-over is supported just fine.
This also begs the question of where do you get anything else to connect to, that runs at 2Gbits/sec. Most Internet connections can't go anywhere near that fast, so it will not improve your download speeds.
Are you doing a lot of local File Transfers? Fiber channel may be more appropriate to support a Network Attached Storage device.

I can't get internet connection even after wi-fi set is done with cisco

I can't get internet connection even after wi-fi set up is done with cisco

Not sure what Cisco is but if you are having problems with your wifi this link might help
On the iPad... tap Settings / General / Reset / Reset NetworkSettings.
Or here is a link that might help http://support.apple.com/kb/TS1398

Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

Can you send SMS by using the mobile data network instead of Wi-Fi? I had the same problem setting up my 5s from a backup of my 4s. Only after I sent an SMS via mobile data network, somehow iMessage and FaceTime got activated a couple of minutes later without me doing anything else.
I even changed my Apple ID password, because at one point I could not log into my account when iMessage asked for my account details.
If you have difficulty activating FaceTime or iMessage - Apple Support

Satellite Pro 4600: When I use WEP, I can't make any connection anymore

Hey everybody,
When I connect my Tohsiba Satellite Pro 4600 via the build-in wireless network card without WEP to an AP, there is no problem, connection is establische and everything is working fine.
When I use WEP, I can't make any connection anymore.
Is there a solution to use 128 Bit WEP encryption on a Thosiba Pro 4600 laptop with the build-in WLAN.
Thanks in advanced
Pokettuk

What WLan card do you use?
As far as I know the notebook should be equipped with the Wireless LAN / WiFi Standard: 802.11b ORiNOCO Mini PCI card.
This card supports security 64 WEP or 128 RC4.
Everything looks like you WLan card doesnt support the same security standard like your WLan router. You should understand that this WLan card is an oldie about 7 years old.
I think the best solution is to use the external USB WLan stick which would support the newest encryption standards
Bye

Acrobat XI can't find internet connection

I have had Adobe CC subsciption for some time now, but recently my Acrobat stopped working. it says that it can't find internet connection. But all the other Adobe applications installed through the CC application manager are working fine.
I've had numerous chats with Adobe agents, and with my office's IT guys, and there has been no solution.
We use corporate anti-virus, firewall and proxy scrypts. I've had all Adobe links whitelisted that were given to me by the Adobe agents. The hosts file doesn't have any Adobe info. I've tried reinstalling n+1 number of times, with various options such as selected boot and such, and still no solution.
Why is it that all other Adobe applications installed under the CC work fine, but Acrobat doesn't?
It's sad that if one buys a subscription and loses internet, one would lose all the products as well. One should be allowed to work on the applications, internet connection or not.
Please help with this Acrobat that has created a circus for me here.

Have you also asked in http://forums.adobe.com/community/acrobat to find out if someone there has the same problem... and a solution?

Is there a way to make internet connections work faster?

My wife has a Macbook and I have the MB Air and we are both running off Time Capsule. Many times when we are both using the internet it becomes a crawl, especially if TC is backing up or we are trying to use Mail or trying to view something on a web site.
I have seen some software out there that claims to speed things up and makes the connection work more efficiently. Does anyone have experience with this? The one recommended to me was IPNetrouterX which has good reviews but is very expensive.
Thanks
Richard

Richard Pitcairn wrote:
My wife has a Macbook and I have the MB Air and we are both running off Time Capsule. Many times when we are both using the internet it becomes a crawl, especially if TC is backing up or we are trying to use Mail or trying to view something on a web site.
I have seen some software out there that claims to speed things up and makes the connection work more efficiently. Does anyone have experience with this? The one recommended to me was IPNetrouterX which has good reviews but is very expensive.
Thanks
Richard
It's a bandwidth issue - the size of the pipe, which you cannot work around. if your network is 100 Mb/s and you have three equal users, each gets about 33 Mb/s. You can't get more out of a network than you put in. The only solution is more bandwidth, a larger pipe. A 1 Gb/s network will be faster if yours is 100 Mb/s.
You can use a 1 Gb network if all your devices support that speed. Of course that will be your LAN or WAN speed. The speed to the internet is dependent on the bandwidth your ISP is providing you.
Don't confuse internet speed with local network speed. Your "internet" speed is constant, it's the sharing that is slowing the LAN.
Message was edited by: nerowolfe

How can i make a connection between an application and a database over net

dear sir
how can i make connection between an appliction and a database over internet while the client side appliction is behind proxy and firewall
for example how the live update of norton antivirus makes connection to the data server to make comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

The ability to do so depends entirely on the JDBC driver implementation having some proxy method. It needs to recognize the HTTP or SOCKS proxy and use them to connect, and the firewall and proxy need to allow those specific port connections.
To the best of my knowledge, all of these update utilities, e.g. live update for Netscape, Norton, etc., do not connect directly to the database. As it is, no sane security person would allow a database to be exposed to the Net. Rather, they connect using HTTP or HTTPS, which normally traverses firewalls just fine, to connect to a Web or application server on the far end. That application server then parses the request and retrieves whatever it needs to from the database.
In other words, you cannot have a 2-tier client/server application. You need a 3-tier application:
your client -> Web/app server -> database
where the connection from your client to the Web/app server is over http or https through the firewall and proxies.
Hope this helps.
Avi
dear sir
how can i make connection between an appliction and a
database over internet while the client side
appliction is behind proxy and firewall
for example how the live update of norton antivirus
makes connection to the data server to make
comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

WRT54G V.7 makes internet connection instabile

Hi all,
For two weeks, I've been using my new WRT54G V.7 router. I bought it, because I a got a 20Mb/sec connection and I wanted to connect my PC (wired), my Xbox 360 (wired) and my Nintendo Wii (Wireless Wifi) at the same time.
Though internet in general is very fast, I've noticed that the router makes the connection very instabile. When I play online movies (mpeg, quiktime, etc.) or when I down- and upload torrents via ABC, the connection drops to almost 0 KB/Sec every now and then. That causes (in the case of movies) stutterings in sound and picture and (in the case of ABC) up- and download rates of 0 KB/sec. After a while, this even effects the 'rest' of the computer, for instance when I play music with Winamp, it gets audio stutters as well, when I'm using internet.
I checked and when I'm not connected to the internet or when I connect the ISP's modem directly to my computer, there's no problem.
I tried everything I could. Upgraded to firmware 7.0.4 correctly, optimalized the MTU settings, switched between static and dynamic IP, etc. But nothing works.
Does anyone have an idea what I can do about this problem? I have the fastest internet connection availabe at the moment, but can't really enjoy it this way. So please, anyone?
Patrick

I have/had exactly the same set-up (20 Mbps downstream) and stability issues. I have installed the latest firmware for my Intel Pro 2200BG client which has resolved many of the problems. I further decreased the number of concurrent threads on my torrent client. Next to this I have enabled SSID broadcast and changed many of the new parameters in the Intel driver (broadcast power, long tx preamble etc). My stability issues have now been resolved.
There is another thread under my name that lists exactly all the changes I have made.
Hope this works for you too,
Regards,
Olaf

How can I share internet connection of iPad?

Under the following considerations:
- An iPad3 has established a 3G/4G data connection.
- There is a wireless access-point working.
- iPad is connected to that wireless access-point.
- There is a notebook (or desktop whatever) also connected to same wireless network.
... is it possible to share iPad's internet connection across the network and how?
Important note:
I am not looking for iPad to perform like a wireless hot-spot. IMHO I am looking for a gateway/router application for iPad.

You can't.
If you don't want to use your local WiFi you could try using a mobile phone that allows you to create a personal hotspot.

Can't share internet connection with iPad since installing Time Capsule

Until today, I've used Earthlink's DSL service with a Netopia DSL modem with an ethernet connection to my iMac through a Linksys WRT54G router. My iPads (1 & 2) have been able to simultaneously share the internet connection over wifi.
Today, I installed a Time Capsule and removed the old Linksys router. I'm still using Earthlink's DSL service with the same Netopia DSL modem, and I still have an ethernet connection to my iMac, but through the Time Capsule now. I can get online from the iMac without problems.
But my iPad can no longer connect as they did previously. When I try to visit a website using Safari on the iPad, I get the message, "The Internet connection s currently in use by another computer. Enter your DSL Account logon password to switch the Internet connection to this computer." If I enter the DSL account password on the iPad, I can get online, but then the iMac is knocked offline.
How can I go back to sharing the connection so that any of the devices can get online at the same time?

I found another thread right after I posted and seem to have solved the problem following the steps described there (plus a couple more).
https://discussions.apple.com/message/15758093#15758093

Can't make Internet connection

Similar Messages

Maybe you are looking for