Can`t make it start, continuously flashing led

Hi, I have a Power Mac g5 2.0ghz with 4 memory slots. Sudenly I can`t make it start. I get continuosly flashing led without hearing the start bep.
I try:
1) changing the ram
2) changing video card
3) reset PRAM
4) reset SMC
5) cleaning the Ram with rubber
6) using a hairdryer in the motherboard
7) disconnecting the CD Player and Hard Drive
Some times (1 in 20) I can get the machine to start, but when I turn it off it does the same and I get the flashing led.
Power light status
What it means
On and solid
Computer is on and running
2 flashes, pause
No memory (RAM) is installed
3 flashes, pause
Incompatible memory (RAM) is installed
4 flashes, pause
No good DIMM banks detected
5 or 6 flashes, pause
Contact Apple or an Apple Authorized Service Provider
I should contact a service?????
Thanks

I should contact a service?????
Hello, sadly Apple no longer works on G5s, nor has any parts, you might find an independant AASP that might in your area.
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
No power light at all...
https://discussions.apple.com/thread/3692775?tstart=0
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690
Heat gun better...
https://discussions.apple.com/thread/3916312?tstart=0

Similar Messages

Can I make Crystal start up in Preview mode?

Can I make Crystal start up in Preview mode? I am running v.10 and some reports open up in Preview mode but others do not. How can I make a report open in Preview?

Hi..
Open the report then refresh the repot(F5). Now you can see the preview of the report. Go in File--Click on save data with report option.
Now you save the report. Next time when you open this report you can see the preview.
Thanks,
Sastry

How can I make textedit start with a new (blank) document?

How can I make textedit start with a new (blank) document?
Instead of it starting up with a dialogue box to select an existing or start a new document.

@Alley_Cat thanks for the ideas.
I turned off System Preferences > iCloud > Documents&Data - problem solved.
I'll use DropBox instead - it provides the options for a better experience. I hope Apple keep working on iCloud so that it doesn't go the way of Moble Me.

Can i make Animations with Adobe Flash CS3 Professionals?

can i make Animations with Adobe Flash CS3 Professionals? my
goal is to make a Animation Serie But i got no Expereience!
Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i get a tutorial/training thing on
www.adobe.com?

Ha!
Just scratch the surface by using the search functions on
this site or google - thousands of
websites that showcase flash animations since version 3 back
in the late 90's - many websites have
dedicated themselves to flash training and tutorials over the
years.
Basically, anything on the web that looks animated, right
click over it and 9 times out of ten it
will say "Flash".
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Arfusman wrote:
> can i make Animations with Adobe Flash CS3
Professionals? my goal is to make a
> Animation Serie But i got no Expereience!
> Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i
> get a tutorial/training thing on www.adobe.com?
>

How can I make podcasts play continuously. And Why do I have to sign in to itunes twice every time I open it?

How can I make podcasts play continuously. And Why do I have to sign in to itunes twice every time I open it?

its really annoying since nobody uses my computer and its password protected.... But like sometimes it does happen where i have to put it in, and other times it doesn't

How can I make Thunderbird start auto with windows start-up

how can I make Thunderbird start auto with windows start-up

You can by placing a short cut in the windows startup folder, just like any other windows program.
However if you do you are likely to encounter problems as downloading mail while the anti virus is still loading and the network is busy announcing your machines arrival to the network ( which might be a network of one) and any of a dozen other program are loading is fraught with risk of timeouts and server disconnections as well as error messages that make little sense because they are about something that is still loading.
So the bottom line is sure you can, but if there are issues take it back out of there as a first step.

HT201317 since I have down loaded the iOS7 software my photos are no longer up loaded to my laptop. How can I make this start happeing again?

Since I have downloaded the iOS7 software my photos no ,longer automatically sync and upload to my lap top. How can I make this happen again?

Hi missvashenca,
Thanks for using Apple Support Communities. If your photos are not appearing on your computer from your iOS device anymore through Photo Stream, I'd first verify that the Photo Stream service is still enabled on your iOS device:
iCloud: Set up Photo Stream
http://support.apple.com/kb/PH2605
If it is, you may also want to try switching it off and back on again.
Likewise, I would also try this with your computer's Photo Stream settings.
As always, I recommend backing up your photos before performing troubleshooting:
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Cheers,
- Ari

How can i make a ebook by flash

i want to make a flash like this-->
http://www.ns-tool.com/products.
but i dont kown how to do it. (i'm a java coder)
can you give me some advice?
sorry to my english,and best wishes for you, thx~!

another flash flipping book question
A powerful opensource flipping book script:
http://www.iparigrafika.hu/pageflip/
A component version,
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1067 972
Sample & Tutorials,
http://blog.ggshow.com/index.php/extensions/2007/04/02/gg_book_pf2

How can I make Bluetooth start up first?

On my Mac mini I have a wireless keyboard and mouse. When the machine starts up, it loads the usual components, looks for the network etc and (incidentally) starts Skype - and only after this does it appear to activate the keyboard, and after that (sometimes 20 or 30 seconds later) it activates the mouse. I would like the mouse and keyboard to come up first thing, so that I can look for example at System Preferences etc as soon as possible - I'm powerless without the mouse. So the question is, is there some way of changing priorities so that Bluetooth starts up near the beginning of the startup sequence? I've searched the forums but couldn't find a similar question to this.

You can partition a small slice of one of your HDDs. Install the OS to that. 32gig should be enough., Disk utility in applications/utilities allows you to shrink a partition and add another. The exception is fusion drives. If you go down the path of shinking a partition please make sure you have a good backup.
You can install the OS to a sufficiently large USB thumb drive (32gig should do it). Add drive genius and boot from it when needed.

FAQ: How can I make a SWF from Flash Catalyst scalable?

The SWF files that Flash Catalyst publishes are fixed in size. Even if you set the size of the SWF manually when embedding it, the content created in Catalyst will remain the same size. However, with a small amount of work in Flash Builder, you can make your SWF scale to fit the width and height you want.
Follow the instructions in this tip on FlashCats.
Answered by: Bear Travis.
Read original discussion.

Welcome to our community
Please take a look at the links below. Not only do they answer your question, they are there to help you get the best forum experience.
Forum Participation Suggestions
Frequently Encountered issues
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can I make the start and end of a move smooth?

In Premiere Elements 11 I often have zooms or pans which I want to begin gradually, then speed up slightly and then slow down as each one ends. I've tried every comination and permutation of temporal and spatial interpolation, and I still can't seem to get it quite right. Often I wind up with the image doing a graceful arc (no doubt the result of a bezier interpolation) rather than just moving in a straight line. Is there just a simple solution? I just can't stand having a move start and stop with jerky linear motion.
Thanks in advance.

Mark West
To supplement prior information
If you want to change what the clip rubberband represents, you can click on the tiny triangle next to the Timeline's clip's title.
Please refer to blog post on Video and Audio Track Content Rubberband
http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html
In the case of a video clip, the default for its rubberband is Opacity. But that can be changed to Motion. As I wrote in the blog post
The Motion Property options are Position, Scale, Constrain Proportions, Rotation, Anchor Point, or Anti-Flicker filter. The Opacity choice is just Opacity.
Keyframing of these properties are reflected as white dots on the clip's rubberband and can be adjusted at that level.
If you do not see the white dots keyframes in the clip's rubberband, then right click the file, select "Show Clip Keyframes", follow to Motion and Opacity, pick one, and follow to find your property named, and select it.
At the rubberband level, right clicking a keyframe (white dot) there, offers opportunities for Linear, Bezier, Auto Bezier, Continous Bezier, Hold, Ease In, Ease Out, and Delete. If you select Bezier, do you see the keyframe handles?
I have not done this, but you might want to see how much of the following you can get done in Premiere Elements using the Final Cut description of "Smoothing Keyframes with Bezier Hangles".
https://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=67%26section= 2%26tasks=true
ATR

How can I make auto the continue and come from?

Hi:
Please sorry my grammar. I try to explain better as I can.
Let's see. I have included some internal links such as "continued on page XX" and "comes from page XX" for some items. The problem is that as I add artwork or text, the number of pages varies, and so I have to edit the "continue" and "comes from" manually. Is there any way that InDesign assign the number of pages automatically? I mean, for example, when I indicate to a text box where you should continue (usually another text box), just that I do but whith the page number of the expressions "continue" and "comes from".
I hope that I explain it well.
Regards from Lima, Perú

In English, these are called Jump Lines. If you already have a text frame that reads: continued on page XX, delete the XX, place the cursor after continued on page and go to Type>Insert Special Character>Markers>Next Page Number. Do the same with the continued from page XX, but use Type>Insert Special Character>Markers>Previous Page Number.
If you have a story that spans two or more text frames, placing a jump line frame so that it touches one of the frames of a threadded story, it will display either the page number of the previous or next frame in the thread.

How can I make a table continue in same page

I have a three column table, I want it to continue on the same page instead of continuing into a next page, is there a way to do this?

Hi Javier,
A solution by Badunit
Table 1
a
b
c
d
e
f
g
h
Table 2. Formula in B2 (and fill Down and Right)
=IFERROR(IF(OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)="","",OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)),"")
a
d
g
b
e
h
c
f
Table 2 can be any shape.
Regards,
Ian.

How can I make Safari start my homepage all the time?

I don't like that Safari starts the last page that I was on everytime I run the application. How can I change this so that my default homepage is opened everytime instead?

Go to your Safari menu bar click Safari > Prefrerences then select the General tab.
You can set your home page from there.
If you are running Lion v10.7, disable the Lion "resume" feature...
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
BTW... when you post for help, please tell us which Mac OS X you have installed. That really helps.

Can you get a notification light (flashing led) for the iphone 4s?

Hi, Im a new user got an iPhone 4s. Just windering can you get a LED norification light for this. I've searched the app store but not found anything?

No it works with phone calls too.
I just tried it.
Try restarting the phone

Can`t make it start, continuously flashing led

Similar Messages

Maybe you are looking for