Can't make portlets floatable

My Portlets have recently decided that they are no longer floatable (they
were previously floatable). I'm fairly sure that I've done nothing to cause
this, but I can't be sure and they certainly won't float.
According to the administration tool the portlets are "Available",
"Visible", "Minimizable" and "Floatable". When I test in the header using
"PortletRenderHelper.isFloatable(request)" I always get false returned
(when I try "PortletRenderHelper.isMinimizable(request)" I get true
returned).
I'm using the standard setup on NT with the cloudscape database.
Any ideas?
Thanks,
Matt

You can try a hard reset by holding down the home button and the lock button at the same time until the apple appears. If that doesn't work I think you should definitely go into an apple store.

Similar Messages

Can i make portlet by JSF or ADF

Hi All
can I make portlet by JSF or ADF ?
if I can , what do I need to deply it
which version of infrastructure and middle-tier to deply it?
do I need web-cetener OR SOA Suite ?
thanks

Good question !
I would also like to know what is required to build and run an AJAX-enabled JSF page inside an Oracle portlet. There seem to be a few options for each component:
JDeveloper ? 10.1.3.2 with WebCenter /or 11g preview
JSF ? Oracle ADF Faces 11g tech preview /or Apache Trinidad 1.2.1
OC4J portlet container ? 10.1.3.2 /or 11g preview
Portal Faces Bridge ? which version ...
Portal Server ? which version ...
WSRP protocol ? v1 /or v2 ...
This is a great start:
http://www.oracle.com/technology/products/adf/adffaces/11/doc/demo/adf_faces_rc_demo.html
which says you can run the ADF Faces 11g preview on the OC4J 11g preview, either standalone or embedded in the JDev 11g preview, but it doesn't mention portlets.
These are also good links for older JSF-in-a-portlet:
http://blogs.oracle.com/shay/2007/02/02#a315
http://www.oracle.com/technology/products/jdev/viewlets/1013/portletize_jsf_pages_viewlet_swf.html
but are based on JDev 10.1.3.2 WebCenter, and don't mention the new Rich Client AJAX-enabled technology previews.
This is good for Trinidad integration:
http://www.oracle.com/technology/products/jdev/howtos/1013/trinidad/trinidad.html
but is also based on 10.1.3.2 and does not mention portlets.
I suppose it comes down to the availability of a Portal Faces Bridge library for the new preview, and whether there are any dependencies on the WSRP protocol and the Portal Server ????
Mik

How to make portlet expandable?

Dear all,
how can i make the portlet expands depending on its content without making vertical/horizontal scrolls?

Thats a CSS question. Identify the div and class which applies tp it (use firebug and firefox or develper tools and ie). You have a scroll or overflow , probably auto and an explicit hieght. customise the css to remove this or modify it as you want.

How do you remove credit card from account so child can't make purchases?

How do I remove credit card from apple ID so child can't make purchases?

Account section of iTunes or App Store.
Barry

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

I've been trying to make an account with iTunes n everytime I get to the part of the credit card that's as far as I get because I dnt have one, how can I make an iTunes account without a credit card??

Where are you located?
Just go and buy an iTunes gift card at any store in your country.
Then follow all the steps you did, but when it asks you for the credit card number, there shoujld be a GIFT CARD option which will let you load your account witht eh funds form the gift card without providing a credit/debit card #.

How can i make an iTunes store acount without a credit card?

how can i make an iTunes store acount without a credit card?
im israeli and the israel store is only the app store.
i want to get stuff for free without a credit card.
help?!?

Just go get a prepaid Visa or something. Put a small amount of money on it and then use that to open an account. If that doesnt work just call them. Contacting Apple for Support and Service 1 800 275-2273

HT1918 how can i make an apple id account without a credit card?

how can i make an apple id account ? it says i need a credit card but i dont have one how can i get passed this?

Download a free app, create a new apple id account and click none when it says to fill in credit card information.

How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

Download everything on your computer in iTunes, then sync your iPod to iTunes.
You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

How can I make mac except capture from my canon xlh1?

How can I make my imac recognize my canon XL1 Camcorder in Final Cut Express

Assume you are connected by Firewire, and that FCE has Import in some menu? Also check FCE Forum https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd?view=discussions.

I have recently purchased an iTunes gift card to make purchases in my favorite game but for some reason I can't make in app purchases. Someone said that I have to have a credit card but I don't want one of those. Can someone help?

I bought an iTunes gift card to purchase certain things in my favorite app. Well when I try to buy things inside the game it does not give me the option to approve the purchase and it never shows up. I have reset the app, I have deleted the app and downloaded again, I have turned my ipod off and on, I have made sure all updates are up to date and nothing has changed. I saw a similar question like mine and the answer was that you have to have a credit card linked to your iTunes account to make in app purchases and I was thinking they were right until I talked to a few friends who cancelled their credit cards and took them off of the account and can still make in app purchases so that can't be the issues. Can someone please help me this is driving me crazy I have talked to iTunes support but they weren't much support.

Not clear what you mean by iTunes help. You can contact iTunes support by:
Apple - Support - iTunes - Contact Us

Can't make a workable custom codec with ProRes 422 (HQ)

I've only just now found that there is a Support Community for Compressor. Wish I'd known sooner.
I see my version of Compressor is 3.5.3.
I've been on a little saga.
I started out with the challenge of converting some MP4 files from a Blackberry Playbook into ProRes 422 (HQ) for editing in Final Cut. I used Compressor and the task looked fairly straight forward. I used the ProRes setting in the Compressor, converted my files and imported them into Final Cut. Video was fine but I soon found out that the audio needed rendering every time I put a clip into the Timeline. I went on-line to various chat rooms with this problem. Pretty soon a fellow was telling me that the ProRes 422 (HQ) setting in Compressor had "Audio Pass-through" as default and that this was the cause of my problem. Change it, he said, to "Linear PCM".
It took me a fair while to figure out that the ProRes setting in Compressor did not allow itself to be modified and that I'd have to create a custom preset if I was to make these changes. I set about to do that. I was able to select "QuickTime Movie" and then in "Video/Settings" choose "ProRes 422 (HQ)", in "Audio", "Linear PCM". This did solve the audio problem. Now files imported into Final Cut did not need rendering. But another problem became evident.
Whereas the ProRes 422 setting that came with Compressor in its summary page listed: "Width" and "Height" as "(100% of source)", the custom ProRes 422 (HQ) setting I'd just created has "Width" and "Height" as "320" and "240". In short the 19:9 aspect ratio of the original footage was lost. What I got both in the conversion and in Final Cut was a squished SD image.
I've played like heck with Compressor trying to see if there was some place I could get this custom version of ProRes to correspond to the aspect ratio seen in the Audio Pass-through version that came loaded in Compressor. No luck. All very mysterious.
My next step was to look to create another custom codec that would have the proper 1280 X 720 ratio. Turns out "HDV 720p 30fps" does, so now I've been converting to that. Looks fine in Final Cut - proper picture and sound.
I've been playing around a bit more and see now that I can create a custom setting using "Apple Intermediate Codec". I've tried it and it works too.
So after all this, my question: Should I be using that codec instead? Or does it really matter what codec I use for editing? Is the only real issue what codec I decide to use to output?
And while I'm at it: Does anybody have ideas why trying to create a custom setting with ProRes 422 (HQ) does not work - for my purposes at least.
I must admit this converting codecs is pretty new to me. Hopefully with time this experience will get easier and clearer.
John

Setting a Compressor ProRes Custom Setting:
1) Pick Apple ProRes 422...
2) Drag the PreRes 422 setting to the Bach Window. You can only make a custom setting from the Batch Window...
3) Select enable for the audio. Click on setting to make sure it is set right. Uncheck Allow Job Segmenting... Make sure Streaming is set to none*....
4) Select the Geomenty tab... Pick Custom (16:9):
5) Click Save As and name your custom setting...
6) You new custom setting will show up in the Custum folder for later use:
Another thing you can do is make Droplet of this custom setting. Menu... File... Create Droplet... Save the Droplet into a folder somewhere on your computer.
A Droplet will start the transcoding automatically. Drag the Droplet onto a video icon and let it do it's job.
* ProRes doesn't need the Fast Start setting. If this is set it will take almost twice as long to do the encoding. Same with Allow Job Segmenting using Qmaster.
I did the above on the fly and hope everything is clear for you to understand.

All iWeb options are greyed-out, and can't make a new sites or pages.

Hello,
I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!

Hi ineedagoodalias,
The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
Update the app to 1.1.1 directly from this link:
http://www.apple.com/support/downloads/iweb111.html
This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
http://web.mac.com/varkgirl/iWeb/iWebFAQ
Be sure to let us know how it goes.
Mark

I updated my phone to the latest version on 4-23-2014 and it is requireing me to plug it into my computer. But I no longer have a computer and Its stuck on this screen. I can not make or recieve calls

I updated my iPhone device for thw 7.1.1 update that was avalibe on 4-23-2014. when I did this my phone is prompting me to connect to itunes on my computer. My computer is no longer working and I can not make or recieve calls on my phone.

Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808

TS3988 When I try and log into the icloud, I get a message that my Apple ID is valid but not an icloud account. How can i make it one?

Whin I try and long into the icloud, I get a message that my Apple ID is valid, but the it is not an icloud account, how can I make it one?

To use iCloud on a PC, you must first set it up using a device with iOS5 or a Mac with OS X Lion.

I synced two of my email accounts via gmail's POP3 thing. But now my iphone's gmail inbox shows a random selection of emails (not most recent ones that are in my inbox). How can I make my iphone inbox match what I see when I log on using a PC?

I synced two of my email accounts via gmail's POP3 capabilities. But now my iphone's gmail inbox only shows a random selection of emails (i.e. right now it is May 31, 2013 but the emails in my inbox are a couple from Nov 12, a few from Oct 12, and then some way older than that and so on.When I log into my gmail from a computer, I see all my emails in the logical, standard order. How can I make my iphone inbox match what I see when I log on using a PC?

If you're trying to decide between using POP and IMAP, we encourage you to use IMAP.
Unlike POP, IMAP offers two-way communication between your web Gmail and your email client. This means when you log in to Gmail using a web browser, actions you perform on email clients and mobile devices (ex: putting mail in a 'work' folder) will instantly and automatically appear in Gmail (ex: it will already have a 'work' label on that email the next time you sign in).
IMAP also provides a better method to access your mail from multiple devices. If you check your email at work, on your mobile phone, and again at home, IMAP ensures that new mail is accessible from any device at any given time.
Finally, IMAP offers a more stable experience overall. Whereas POP is prone to losing messages or downloading the same messages multiple times, IMAP avoids this through two-way syncing capabilities between your mail clients and your web Gmail.
That is from the page that you linked- does highlighted part of message ring a bell?

Can't make portlets floatable

Similar Messages

Maybe you are looking for