Can't make the Telegraph site work with 25.0.1

Often, when you issue a new release, The Telegraph website fails in Firefox and I have to use IE for a few weeks.
But since 22.0 on 3 July, each time one follows a link, the text of the page is entirely blank.
25.0.1 fails to fix this problem.
I suspect that it has to do with The Telegraph's authentication that the user (ie me) has in fact paid for the rights to view.
Curiously, there is never a problem with The Times, which operates a similar authentication scheme.
I would have thought that there must be hundreds of thousands of Telegraph readers who are being forced to use IE (with all its vulnerabilities).
Grateful for any ideas you may have.
Best wishes and thanks for a super product
René Milward, a firm Firefox believer

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

How can I make the FN buttons work with an older notebook?

Hi,
I have the Satellite 5200-902 notebook. Unfortunately there is no support for such an "old" notebook like this concerning Windows Vista. Vista runs great on it but the only thing I didn´t make is to make to FN buttons work in Vista.
Can someone please give me an advice ?
Thanks

Hello Danny
Unfortunately I do not believe you will have success with those buttons. The fact is that Toshiba use self designed utility for functionality of all FN buttons. As you know, old notebook models are not vista supported and you will not be able to find and install any utility for that.
Sorry but there is nothing to do.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

An Idea: How to make the Magic Timeline work with Tracks

i have thought about this for a title and i think i have found a solution. the magic timeline is pretty cool but with it we lost tracks. for broadcast (not only for that but mostly for it) you need tracks that are assignt in a special way and there is no way around it. so i came up with the following idea…
to make the magic timeline work with tracks it will be a like an audio compound clip, that will give you full access to the magic time. but it can be outputted to proper tracks assignment.
current audio compound clips don't show you the video if there is one. this one will. also audio can be tagged to a track so it will automatically drop into the right track. you can of course move the audio from one track to another. moving the clip to another track will auto change the tag to new track. if you copy an audio clip from one track to another, the original clip will keep its tag but the copied one gets the new tag.
example…
you do a voice over with all your edits and stuff. then you collapse it to a track (new name to get rid of any sort of confusion). you can tag/name the track to "voice over" or whatever you want and color label it.
you need to edit, adjust it? no problem! double click it and it will open up and you'll see the magic timeline. edit till you done and click on arrow to return to track view.
export your movie with proper tracks for broadcast right out of final cut pro x
in the end your output timeline looks like a timeline from fcp7 before you output it on tape.
could this work? i believe it could and it would help to make fcpx ready for broadcast.
i hope this makes some sort of sense to you
anyway, i hope apple will include this or something like this in an update for fcpx.

You may be able to get by with just running MDT 2010 for now. *However* you *must* ensure that you are running WinPE 3.1 or greater, If you are unsure, open up a command prompt in WinPE (PRess F8), and run "ver" it should say build 7601 or greater, 7600
and less is not compatible.
When done, Run the Dell Advanced Format tool in the Full OS on a deployed machine to verify: http://del.ly/afhdd Although it is possible to install an OS on an Advanced Format Drive
with WInPE 3.0 or earlier, and it may *appear* to work, performance may suffer. The Dell AF tool should tell you if the sectors are aligned properly.
Additionally, it is also possible that the storage driver you have installed in your image is incompatible with AF drives. Check the Make/Model and check with the Hardware Mfg to see if they have driver that supports AF drives.
Keith Garner - keithga.wordpress.com

How to make the bt hub work with GreenBee?

I have some old BT hub (hub 2,3,4) can I make any of them work with another ISP like greenbee I heard changing the user name and password works? But I don't know what to change them to

There are some options on this web page.
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can I make the editor photoshop work

how can I make the editor photoshop work? it can not work at all.
please help me . thanks

You need to tell us at least what program you are referring to and some system info...
Mylenium

HT4623 iPad 3 how can l gets the SIM card works With iPad 3

As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

I am using the Kurzweil 3000 software and before I can use Read the Web, KESIReader Firefox extension must be installed. This is not compatible with Firefox 5, how can I make your extension to work with my software?

I use the kurzweil 300 software and before I can use Read the Web I must first install the KESIReader.xpi Foxfire extension into Mozilla Foxfire however, the extension is not compatible with Mozilla Foxfire 5 which is the version installed on my computer. What can be done to make this work with Kurzweil 3000 software and the Read the Web tool?
Mozilla Firefox or Microsoft Internet Explorer 7 or 8 Web Browser.
Can you help me with the information I have provided I know the rest of the requirements are meet.

Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

How can I make my cd-roms work with osx 10.4.9?

We bought a new mac, but my kids cd-roms -- which we just bought in December -- don't work with it. They say they're Macintosh compatible, but I suspect they just don't work with this new system.
Is there a driver or some other update I can download to make these games work?
Thanks for your help -
S.
PS: I don't know if it matters, but the games are from Disney (Cinderella's Dollhouse and Magical Dress-Up) and Vivendi Universal (Barbie Swan Lake & Barbie Fashion Show).
iMac Mac OS X (10.4.9)
iMac Mac OS X (10.4.9)

Hi again,
The games are copyrighted 2001, 2002, 2003 & 2004; I just bought them in December.
This is a classic case of: had an old computer, the new CD-roms were too advanced & wouldn't work. So I bought a new computer, and now the games are not advanced enough!
Although the other posted said I probably had to run them in "classic" - that's not something I should really do, right? Or is it ok to switch my OS back & forth?
When I first realized my problem & went back to the store, they suggested I look for a patch of some sort, that would upgrade these games. Is that realistic? I went to the mattel site & the vivendi site & didn't find anything that looked useful.
Finally, I do want to buy games for my kids. What sort of compatibility do I need to look for in the future? Is there really no way for us to use these games now?
Thanks for your help (and patience, since it takes me so long to get back to these forums
-Susan
imac Mac OS X (10.4.9)

How can I make the ${foo} syntax work?

Hello,
I have a jsp page and I am using Webwork with the action class exposing beans to the ognl value stack.
Should I be able to write ${foo} with JSTL? I get the expected value if I write <c:out value="${foo}"/> I do get the expected value.
The real reason I am asking is because I am trying to use a custom taglib and the parameters are not being evaluated. For example, ${accounts} should represent a collection and when I use <input:selectBox options="${accounts}"/> - the actual string "${accounts}" is passed to the tag. I would really appreciate some help. Thank you very much.
I am using apache-tomcat 4.1.39 with jakarta-taglibs-standard-1.0.6 for the JSTL implementation. Thank you very much for any help you might be able to offer.
Regards,
Joe

Thank you very much for the response... that makes a lot of sense. I still have 1 question though... this is the strange part;
The standard JSTL taglibs seem to be able to handle the ${} syntax yet I am also working with a custom taglib that does not seem to have the tags parsed. If you can help me fix this, I would be extremely grateful...
This works fine:
<c:forEach items="${accounts}" var="account">
     <c:out value="${account.accountNumber}"/>
</c:forEach>
But, when using the custom taglib:
<input:selectBox options="${accounts}"/>
the options value in the tag class is actually "${accounts}" and no the list which ${accounts} represents. Do you have any idea as to why this would occur? Here is the tld (snipped to show the parts I am referring to)
     <tag>
          <name>selectBox</name>
          <tag-class>example.SelectBoxTag</tag-class>
          <body-content>JSP</body-content>
          <display-name>selectBox</display-name>
          <attribute>
               <name>options</name>
               <required>false</required>
               <rtexprvalue>true</rtexprvalue>
               <type>java.lang.Object</type>
               <description>Any collection of elements to be added to select list</description>
          </attribute>
     </tag>
thank you very much.
Joe

How can I make the web server work on port 80 and not 443. I can only access my website using https.

On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
How can I change that? Does anyone know?
Thanks for any reply

in the server: I checked the SSL certificate. Tried several configuration.
Well, that's a problem for a start.
Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

I can't make mi iPhone 5s work with my MacBook Pro Mid 2012

I have seen the way handoff and continuity works but I can't make them work with my devices. I just can make and answer phone call's. That`s why I need some help to see what is happening and how can I fix it.
Thank's in advance

Hey ersalazar1,
Thanks for the question. After reviewing your post, it sounds like you want to use continuity with your devices. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't make the Telegraph site work with 25.0.1

Similar Messages

Maybe you are looking for