Can't manage podcasts after installing itunes 11.1

After installing itunes 11.1 and joined the crowd that can't manage old podcasts. Where can I find a download for Windows 32 bit itunes version 11.0 or later?

My solution was to delete version 11.1 and install an earlier version. The link I used is below:
http://support.apple.com/kb/DL1103
This took me back to the 10.3 version, which is familiar territory

Similar Messages

Can't download podcasts after installing iTunes 7

I have a 6 gig nano, was using iTunes 6 for a long time and built a huge list of podcasts that updated daily. After upgrading to iTunes 7 none of my podcasts will download. If you hit the refresh button they all just post that icon next to the title looking like they are updating but none of them are.
I've uninstalled/reinstalled a number of times. I'd tried each of the updates that have come out. After I do a fresh install it updates the podcasts once, but if I hit refresh again it stops all of them and won't continue updating them.
Any ideas?
thanks.
Windows XP Pro

I have had a problem with iTUNES 7 downloading podcasts as well. If I select more than a couple at a time to download, windows crashes and reboots. Upon rebooting, when I try to re-download the same podcasts, I get the exclamation point icon next to the podcast indicating a network connection issue. What I have to do to resolve it is go to My Documents/My Music/iTunes/iTunes Music/Downloads/Podcasts then delete the folder that is named after the podcast. Restart iTunes and then the download works again. I think the guilty file is actually in that folder named (xxx).plist. I still don't understand why iTunes crashes like this though.

8.1 can't shut down after installing itunes

I recently reformatted and did a clean install of window's 8.1
I have done all updates, both windows and drivers and the machine is very smooth and stable.
After installing iTunes the computer will no longer shut down, it displays the logging off / shutting down screen but then just reboots.
I have attempted numerous resolutions to no avail, i.e. disabled NIC as bootable device, disabled the hybrid boot feature & flashed and tweaked some BIOS settings.
The computer will not even shut down when I give the command "shutdown /s /t 0"
I only had Windows Office and iTunes installed on the computer and suspecting that iTunes may be the culprit, I uninstalled it and now the computer shuts down without any issue.
I have since read several threads about iTunes and shutdown/restart issues with 64 bit versions of Windows although I have not found anyone else with my exact issue.
Is anyone aware of a resolution for this?
For now I will need to install iTunes so I can sync my phone and then uninstall so I can shut down!

Fingers crossed there will be an update for this, I was lucky that my install so was new that there weren't very many things that could have caused it because I don't think it would have ever occurred to me that iTunes was the issue.
I literally tried every other possibility before waking up in the middle of the night and realizing that the problem started right after I installed iTunes.
I have had issues with Apple software in the past where I attempt to disable it from launching automatically when I boot the computer and it will simply create another entry for itself in the startup list.
If I disable that one it makes another, and another and another.... It's like the freaking Apple hydra.
The want me to know how much I need them! lol

After installing itunes 7 i can't name any playlists

after installing itunes 7 i can't name any of my playlists. when i make a new one it says untitled playlist 13 or whatever number it is and it won't let me name it something else. Also i can't rename any of my old playlists either. Please help!!!
Windows XP Pro

I'm also experiencing this issue since installing the latest update (currently running iTunes, 7.1.1.5 on Windows XP Professional) -- I've tried naming a playlist when it's first created, double-clicking, and pressing F2 (a known Windows rename keyboard shortcut). It LOOKS like it is taking the characters I am typing, but after 2 seconds reverts to the default name, for example: "untitled playlist." this is HIGHLY ANNOYING because I try to make new playlists every day and none of the new playlists I want can be added to my iPod. I also notice that the Sort options no longer "stick." The particular podcast I like to download (the Adam Carolla Show) is broken into 12 segments that appear in reverse order. I USED to be able to set a descending sort on these segments after I dragged them to the iPod. Now as soon as I disconnect the iPod, the sort options I choose are reset. I can start to try manually reordering the segments, but I don't understand why iTunes no longer works the way it did before. I will try reinstalling and let folks know if this resolves the problem. I am surprised that there aren't any release notes or known issues documented anywhere on this site. Our problems are just buried in informal forums and not answered. Typical arrogant, overpriced Apple.

Computer can't find DVD/CD-ROM drives after installing iTunes

After installing iTunes, my computer no longer can detect my DVD-ROM and CD-RW drives. They've disappeared from the "My Computer" window.
I ran "System Restore" and the disc drives showed up, but now they're undetected once again after I re-installed iTunes. I've restarted, I've uninstalled and then reinstalled iTunes, I've run the built-in diagnostic self-checks on the drives, I downloaded updated drivers, I uninstalled and reinstalled drivers, spent 1 hour on the phone with Apple support, and finally spent 2 hours on the phone with Dell Support. Nothing. Please help--I want to be able to use my iPod with Windows.
Dell Dimension E510 Windows XP Windos XP Media Center Edition 2005
Dell Dimension E510 Windows XP
Dell Dimension E510 Windows XP

Hey there. May I interject? Anyone mind?
For the most part, what's occurring is one of two things. Either...
A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
or
B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
Either way, the thing to do to reclaim your optical drives is located in your registry here:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
You'll want to have that open, and a mini-window of the following:
START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal
I don't know if this will help, I think it should.
Good Luck. Post back if you have a problem.
Rachyl

Podcasts subscriptions corrupted after installing iTunes 5

I have my podcasts set to update manually and after installing iTunes 5 I noticed that when I try to update them iTunes showed there are no new episodes when clearly (and iTunes podcast directory confirmed it) there were.
Then I noticed "subscribe" button in the podcast directory's page for my podcasts was active and after i re-subscribed to all of my podcats (for example TWIT) iTunes added an identical TWIT podcast entry to my podcasts list and started re-downloading ALL of the podcasts i already had along with the new episodes.
So now i have a choice of either having to re-download all of my podcasts in order to get new ones OR be without new episodes untill this is fixed. And re-downloading all of my podcats is not an option cause of my connection. Also i don't wanna have duplicate entries for my podcasts in order to have the new episodes.
I really hope iTunes 5.1 comes out soon and fixes these bugs. In my opinion, this is the buggiest release of iTunes for Windows Apple ever made.

ME TOO. Now I want to know how I can DOWNgrade iTunes.
Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
G4 Mac OS X (10.4.9)

After installing itunes 10.5 itunes wont open it says i have an error , i need help so i can update my ipod , HELP!!

after instaling itunes 10.5 i cant open itunes , my pc says its an error . . what do i do ?

In order to download iTunes 10.7, which requires OS X 10.6.8, you have to buy OS X 10.6. It's available from the online Apple store, in the US by calling 800-MY-APPLE, or online here. After OS X 10.6 installation, run Software Update until there are no more updates available, at which point you'll be at OS X 10.6.8 and can install iTunes 10.7.

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found" How can I get rid of the pop up?

I hope it doesn't effect how I down load my itunes to my ipod and iphone.
No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

I can not open different sites after installing itunes. Why?

I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

No cd drive after installing itunes

Hi,after installing itunes to my packard bell notebook i noticed that i had no cd drive showing in 'my computer'when trying to start my cd writer it showed 'no recorder'.i've had to uninstall itunes and download a update from roxio to get my cd writer back again.please can anyone help me with this problem.also is it possible to sync my ipod nano with windows media player without installing itunes.
Regards,Tony

No you can't use WMP to sync your iPod.
You could take a look at Yamipod which allows you to manage your iPod without iTunes, but why not try and get iTunes working.
http://www.yamipod.com/main/modules/home/
There is a help on trouble shooting CD problems here:
http://docs.info.apple.com/article.html?artnum=302974
It sounds as though you want the link near the bottom on inability to use CDs.
There is also a microsoft link on CD problems that you might find useful:
http://support.microsoft.com/kb/314060/

After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
Anyone know of a fix or workaround for this issue ?

Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

After installing iTunes, Flash no longer exports .MOV format...

Hi -
I have been using Flash 8 to do animated titling for my podcasts.
But after installing iTunes 7, Flash 8 will no longer export .MOV format. It tells me a Quicktime compenent cannot be found.
Also, QuickTime Pro will not actually play Flash .SWF files. Not sure if this worked before, I never tried it. But it seems to be a QuickTime feature that doesn't work on my machine.
Flash 8
iTunes 7.0.0.70
QuickTime Pro 7.1.3
Any suggestiones or explanations?
I really need to export my Flash animations to .MOV format. It's part of my work scheme. Workarounds cause loss of quality.
Thanks,
Dave Ferreira
([email protected])

Recent security issues has had QuickTime 7.1.3 Player set Flash (inside .mov files) to "disabled".
Any user can re-enable Flash inside .mov files by checking a box in the QuickTime Control Panel (PC) or System Preferences (Mac).
QuickTime Player uses a much older version of Flash and only allows those "published" as version 5, or lower, be used.
The security issues are real. The solution for those of us that use Flash (.swf) inside our QuickTime content is more complex.
If a solution isn't reached between Apple and Adobe about a more modern use of Flash inside QuickTime files I plan on adding a text description (on my Web pages) for the steps to re-enable Flash functionality in my QuickTime files that use Flash.

No sound after installing iTunes v5.0

After several frustrating hours, I managed to successfully install iTunes v5.0. Unfortunately, my machine no longer produces any sound when a music file is played on iTunes. In addition, there is no sound when files are played through Windows Media Player. Both media players indicate that the files are playing correctly. Ive checked all of the obvious fixes (ie. turning on the speakers). Any help would be great.

While waiting for my Apple Chat to begin I tried listening to a podcast and
the Apple Fairy must have visited my phone too because "suddenly" it
worked. I had tried 3 completely different podcasts so I know it wasn't an
issue with any one podcast. We'll see what happens.
On Sun, Sep 28, 2014 at 12:00 PM, Apple Support Communities Updates <

Can't Start Portal After Install

After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?

I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server?

Svchost.exe errors after installing iTunes 7.0.1.8

I have two computers that starting throwing svchost.exe errors immediately after installing iTunes 7. First it happened on my desktop. In preparation to reinstall Windows XP on my desktop, I prepared my laptop to use while my desktop was out of commision. I installed iTunes 7 and immediately I started getting svchost.exe errors. I don't have the blaster worm on either machine (already checked). My desktop is behind three firewals, runs Norton, and I already did a full virus scan on both.
This is causing significant problems as my computer can't see the network, outlook can wig out, and in general my machine is unpredicatable. I hate to think that installing iTunes 7.0 leads to the need to reinstall Windows. If anyone has any ideas I would appreciate any help.

I changed my "Startup Type" for "Terminal Services" from "Disabled" to "Manual". Resolved issue.
http://docs.info.apple.com/article.html?artnum=304434
Windows XP Pro

Can't manage podcasts after installing itunes 11.1

Similar Messages

Maybe you are looking for