Can't markup some documents

I have been trying out the new version of the Adobe ios reader on my iPad 2 (all updates applied).
Unfortunately the first document that I tested, could not be marked up with the highlighter, the strikethrough or underscore.
I managed to locate other documents that were okay.
There does appear to be a difference, in that the pdf in question was re-pdf'd from another PDF to make the size tolerable (8 MB instead of the original ~180 Mb).
As a test, I created a PDF of just one page (from the original doc), then re-PDF'd that page. This gave the same results for the re-PDF'd one, but the initially created page was able to be marked up okay.
Now, I must concede that I use PrimoPDF, but have not found any other issue with such PDF's. Std Adobe reader on Vista, is able to select text in either PDF.
I can supply PDF samples to Adobe support - 3Mb & 150k if requested.

Hello,
No you haven't, and Yes I do (need clarification) - please.
Have you lost my samples? (you acknowledged their receipt, but I can
re-send)
I have had no acknowledgement yet that anyone has has even looked at them.
I posted a reply to this post yesterday, and still have had no response
- so trying direct email.
Stephen
Edit: ... oh well, email reply ended up as a post anyway. Wonder what time-zone Adobe works under?
Message was edited by: NZKiwiBro

Similar Messages

I downloaded the recent Pages update but now I can not open some documents done last year. I get an error saying that I need to download a newer version of Pages. I am running version 4.3

I downloaded the recent Pages update but now I can not open some documents done in the past year. I get an error saying that I need to download a newer version of Pages. I am running version 4.3. Do I have to purchase an update of Pages?

You are not on Mountain Lion anymore, right? You are on Mavericks and have downloaded Pages 5 and then created docuemnts in it which can't be opened in Pages 09.
No, you don't have to buy a newer Pages but you have to be particular about which version you use.

Can't Open Some Document Files, Told To Install Pages 5.0, It Is. What Can i Do?

Pages 5.0 Installed. Now I cant open some document files. I'm asked to install Pages 5.0. I have to take additional steps to Open Under etc. What can I Do?

Sounds like some of those may be Pages '08 files.
You need to open and resave those from Pages '09.
Peter

Can't open some documents in Pages on my macbook pro

I'm running 10.8.5, when trying to open some documents in pages, some of docs are greyed out and will not open. Many others are fine. These are docs that are on the mac, not icloud. Any suggestions on how to open these docs? I am running pages 09

I figured it out. Most of the documents that I could not open were PDF's, so when I went to Finder, they were all there and they were all available to open.

Can't open some documents

Yesterday I downloaded some files, and could open them, today I can't, it says it's already open, but I haven't, and don't see either it is open.

I'm not sure whether to start a new thread so I'll just add to this one. After installing Adobe X I am having trouble reading pdf's on several different sites that I normally use including school and work where the pdf's either just don't open or stall out while loading and never open. I uninstalled Adobe X and dropped back to Reader 9.4 and now all is well...
It seems pretty obvious that Reader X is not completely backwards compatible.

I can't open some documents On my Pages app' - any ideas anyone please?

Documents created before a certain date have been replaced by a picture of an ink well and a fountain pen and when I try to open them the iPad keeps going back to the menu page. I've tried resetting and deleting the app' and reinstalling and none of it has worked. There's are some important notes from meetings and aia desperately need to get access ASAP, all help appreciated!

Attachments that show as a bold downward pointing arrow in a gray rectangle in a dotted box have not yet been downloaded to your phone (usually because they are large). Tapping such an icon should download the attachment if you are connected to the internet and your mail server is reachable. Once downloaded, they should appear as normal (which would depend on the attachment type).
This is the "Using iPhone" forum, so I said phone, but the same applies on an iPad.

How can i print some documents from my ipod?

I'm waiting for the answer

Hi,
Firstly you need a printer which supports this function. Do you have one ? If Yes, please use the following instructiions:
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files).

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files in it at all - not sure what it would be useful for then).
Any suggestions?

Question asked and answered several times.
If you didn't save, nothing is recoverable.
iWork apps don't create temp files so, as far as you on't save something, Time Machine can't archive it.
Yvan KOENIG (VALLAURIS, France) mardi 5 juillet 2011 12:25:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

Why can I change the callout text font in some documents and not others?

By experimenting I have determined that some documents that will allow me to add callouts also let me change the text font to a different font or font size. Other documents that will let me add callouts will not allow me to change the text font. A specific example is that I can add callouts and change the callout's font in pdf's I create by printing from Word, but a datasheet I have from a manufacturer I use will allow me to add callouts but not change the callout font. Why can't I change the font in callouts I add to the datasheet? I am using Acrobat 9.5.2. Thanks for the help.

Thanks Bob, I didn't think of that, I suppose that would work. Basically I would just like to have more text sizes to choose from in the drop down menu, I guess its more an issue of laziness on my part than anything else. I could make a character style for it, but then I'd probably have 10 different character styles just to change the size of my text when it would be less hassle just to type in the size I need. I was just looking for a quick fix default option that I was used to having at my old job.

[JS CS3] Can't add a swatch to some documents

Hello,
I have the following script:
var myDoc = app.activeDocument;
colorIt(myDoc, "lime",cmykRatios =[40,0,80,0]);
function colorIt(docRef,colorName,cmykRatios){
    docRef.colors.add({colorValue:cmykRatios, colorModel:ColorModel.process, colorSpace:ColorSpace.cmyk,name:colorName});
    }//end colorIt
For some documents this script works as it should. But for others I get the error message in ESTK "An incorrect number of color values was given."
The error message is telling me that I cannot add CMYK swatches. If I change the colorSpace to ColorSpace.rgb and have only three values in the array cmykRatios, then the script works in the document that before would not accept it.
But then trying to add an RGB swatch to the documents that previously accepted the new CMYK swatch gives me the very same error message: "An incorrect number of color values was given."
Obviously there is some difference between these documents but I cannot see one. Why would one ID file accept CMYK colors but not RGB colors and vice versa? Any clues as to what might be wrong here?
Thanks,
Tom

Hey Tom!
I just tested your script, and it's working fine on new documents. Then, I created swatch with same name but in RGB space, and received same error. Are you sure that you don't have swatch with same name already in document? But, on the other side, why would it work after you change script to RGB. I added one row into your script, so you can test it.
var myDoc = app.activeDocument;
colorIt(myDoc, "lime",cmykRatios =[40,0,80,0]);
function colorIt(docRef,colorName,cmykRatios){
    if(app.activeDocument.swatches.itemByName(colorName).isValid != true){
        docRef.colors.add({colorValue:cmykRatios, colorModel:ColorModel.process, colorSpace:ColorSpace.cmyk,name:colorName});
tomaxxi
http://indisnip.wordpress.com/

I can't read some pdf documents on my computer

I can't read some pdf documents on my computer with the Adobe Reader X programme.
Sometimes i can read old documents, but in the last months sometimes is possible and sometimes it's impossible.
My OS is a windows 7. I just disinstalled and reinstalled the Adobe Reader X programme but the problem persist.
Some can help me?

Hi Aquila,
Can you please try opening this PDF in your browser: http://helpx.adobe.com/content/dam/help/attachments/Acrobat_Reader_ReleaseNote_10.1.3.pdf
If you are seeing the same blank PDF, then I suppose that you are not having the latest version of Adobe Reader i.e 10.1.4 or it can be that the browser is being used in 64-bit mode. Please use 32-bit mode of your browser.

Hi,I have problem with my mac's storage. I deleted some documents,but the storage involves 34Gb other,what does the other consist of? how can I do my mac's storage specially other free?

Hi,I have problem with my mac's storage. I deleted some documents,but the storage involves 34Gb other,what does the other consist of? how can I do my mac's storage specially other free?

1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
5. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Can I use Microsoft Project Professional to connect hyperlink a some documents in the server of our company?

Just like the titre,
Can I use Microsoft Project Professional to connect hyperlink to some documents in the server of our company? I want to share some documents not in my computer, which is in the server of our company.

Hello,
Sure you can, right click on required task that relates to the document, at the bottom on that menu you will see "Hyperlink". Click Hyperlink and a new window will open, in the new window in the "address" field type or paste in the web address / file share
address etc. Click OK then you will see a web link appear in the indicator column.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Can anyone give me some documents for data cluster

Hi,
can anyone give me some documents for data cluster?
ths!
regards!

Hi ,
The following is a documentation on the Data Cluster:
Data clusters are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
You can store data clusters in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
Cluster Databases ( I have explained the cluster databse below )
This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the data cluster, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
Cluster Database :
 Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the data cluster.
Creating a Directory of a Data Cluster
To create a directory of a data cluster from an ABAP cluster database, use the following statement:
Syntax
IMPORT DIRECTORY INTO <dirtab>
 FROM DATABASE <dbtab>(<ar>)
 [CLIENT <cli>] ID <key>.
This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
To save a data cluster in a database, use the EXPORT TO DATABASE statement .
For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
The IMPORT statement also reads the contents of the user fields from the database table.
If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
The internal table <dirtab> must have the ABAP Dictionary structure CDIR.
******** Sample Program illustrating the data cluster .
PROGRAM Zdata_cluster.
TABLES INDX.
******to save data objects in cluster databases
DATA: BEGIN OF ITAB OCCURS 100,
 COL1 TYPE I,
 COL2 TYPE I,
 END OF ITAB.
DO 3000 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
APPEND ITAB.
ENDDO.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
INDX-PGMID = SY-REPID.
EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
WRITE: ' SRTF2',
 AT 20 'AEDAT',
 AT 35 'USERA',
 AT 50 'PGMID'.
ULINE.
SELECT * FROM INDX WHERE RELID = 'HK'
 AND SRTFD = 'Table'.
WRITE: / INDX-SRTF2 UNDER 'SRTF2',
 INDX-AEDAT UNDER 'AEDAT',
 INDX-USERA UNDER 'USERA',
 INDX-PGMID UNDER 'PGMID'.
ENDSELECT.
****To create a directory of a data cluster from an ABAP ****cluster database
DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
 INDX(HK) ID 'Table'.
IF SY-SUBRC = 0.
WRITE: / 'AEDAT:', INDX-AEDAT,
 / 'USERA:', INDX-USERA,
 / 'PGMID:', INDX-PGMID.
WRITE / 'Directory:'.
LOOP AT DIRTAB.
 WRITE: / DIRTAB-NAME, DIRTAB-OTYPE, DIRTAB-FTYPE,
 DIRTAB-TFILL, DIRTAB-FLENG.
ENDLOOP.
ELSE.
WRITE 'Not found'.
ENDIF.
*******run this program and see the result.
Hope this documentation will give you an idea of data cluster.
if useful, do reward with the points.
Regards,
Kunal.

Can't markup some documents

Similar Messages

Maybe you are looking for