Can't migrate from 10.8 to 10.9 with Time Machine

My old 2009 MacBookPro stopped working and I replaced it with the new one and hoped to be able to use the Migration Assistant to recover my backed up data I had in Time Machine. So far it jsut keeps "Looking for other sources" when I choose to migrate from Time Machine. I was told I should be able to do this going to the new system and I've done it with out any issues in the past. Is there anything I can do to get this working?

I'm having the same issue with trying to restore a Time Machine backup of a Mavericks machine saved to my Airport Time Capsule to a newly re-installed Macbook Pro running Mavericks. Anyone have any other suggestions?
The Migration Assistant keeps getting stuck on Step 5 of the section "Time Machine And other disk migration" in these instructions http://support.apple.com/kb/HT5872.
The computer names have been set to the same names. My Airport Time Capsule firmware version is 7.7.2.
Solution: I had to click on the Time Capsule icon to enable the "Continue" button. The icon doesn't look like a selectable button, unfortunately.
Message was edited by: alfredbeta

Similar Messages

I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore should be very smooth.
Roger

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

How can I split a backup on two hard drives with Time Machine ?

Back-up of my Imac with time machine is 1,3 TB. I have two 1 TB external hard drives but even if I had both as available in Time machine, it seems it doesn't allow to split the backup between the two hard drives. Any way to resolve this without buying another hard drive with more space?
Thanks in advance

You cannot directly split a backup. Your only option would be to open the TimeMachine preferences from System Prefs. and add things to the exclusion list for one of the backups. Then, when you go to do the other backup you would reverse the process and add everything else to the exclusion list and remove the things you had on there in the first place.
Seems fairly intensive though when you could just go and buy a 2 or 3TB external drive and do it all in one...Black Friday is coming up
Regards,

How can I make readyNAS duo 4.1.12 work with time machine?

ReadyNas support don´t seem to have a clue. I have tried to desable cifs and afp and put it back as I read on other forum but with no effect.
Time machine can´t access the backup disk ReadyNas and display OS status error 2.
I appreciate any help.
Thank you.

Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
See this post (Major Dude) that is in the More Like This section:
Time Machine and ReadyNAS Duo

HT201250 Can you Restore from an Old OS X 10.7 Time Machine Backup to a new one 10.8

I am expiriancing problems with my Mac.
I have bought Mountain Lion but when i try to update, it does not do it and starts up like usual.
I loose 4GB.
So i am thinking of eraising my Mac and restoring it from a backup.
I will be taking my mac appart and taking out my hardrive to connect to my friends computer to install mountain lion as the defult operation system.
Now, my question is.
Would i be able to Restore from an 10.7 backup to a 10.8 Mac??
Or would it give error or not alow it.
Thank you

Take a look at Pondini's excellent TM articles, particularly this one -
http://pondini.org/TM/14.html
You should be able to restore your system in full if you backed up system folders as well as your data and applications.
Otherwise, Use the retail Snow Leopard DVD to install Snow over Leopard (no erasing required), then use Setup Assistant from the new installation to migrate from TM.

Can i downgrade from Yosemite to Mavericks by using Mavericks Time Machine Backup?

Hey guys! Well I am in the position of needing to buy a new Mac, but I need it to be on Mavericks due to programs that I run and stability issues. I would love to get one of the new mac minis, but am aware that they ship with OS X Yosemite. Is it true that I can downgrade to Mavericks by restoring the new mac mini from a Time Machine backup that was done on Mavericks? I have heard that this will work but wanted to make sure before I move forward.
Just to be clear, I would take a Mac Mini that has Yosemite on it and restore it from a Time Machine backup that was done from my old Mac (Mac Book Pro 17") that was on the latest version of Mavericks.
Thanks so much guys!

There should be a hidden Recovery HD on your Time Machine backup drive. Boot using OPTION booting:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the icon labeled Recovery HD 10.10.
5. Click on the arrow button below the icon.
Then do this:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select the volume you wish to erase from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit Disk Utility and return to the Main Menu.
Select Restore from a Time Machine backup and click on the Continue button.

Can I upload from my MacBook to an eMac via Time Machine?

Can I upload my MacBook Time Machine to a (newly acquired) eMac... and if so how? (my Time Machine is on a USB 2.0)
My MacBook runs 10.5.8 Leopard and the
eMac specs:
Mac OS X version Tiger. Power PC G4 1.42GHz processor, minimum of 256 mb DDR PC 3200 memory(ram), 80 GB hard drive, CD-RW/DVD ROM combination drive, 64 mb ATI Raedon 9600 video card, 3 usb 2.0 ports, 2 firewire ports, built-in modem, built-in ethernet port for high speed internet, headphone jack, audio line-in jack, video output port.
Now I already know that I have to max out my RAM prior to running Leopard 10.5 and I know that the eMac cannot run Snow Leopard. While I am not totally new to Mac, I am new to upgrading an older Mac.
Please help me...
Thanx in advance,
L

Yes, you need to purchase a retail copy of Leopard, on a disc. It's not available in stores anymore; but AppleCare still has it, for the original price of $129.
You may find some on eBay or other places; most are charging more, but if you find one for less, be sure it's a Retail (black) disc; the gray ones that came with Macs are specific to that model and build period; they won't work on your eMac.

Can I partition a Firewire 800 drive to work with Time Machine and Final Cut Pro?

Hey, I was reading that having Final Cut Projects and Events on the same external Hard Drive as a time machine backup doesn't work well together. So I was wondering if I partition a 2 TB External Hard Drive and use 1 partition for Time Machine and the other for Final Cut Pro, would it work like it should? I had thought so because it would recognize it as 2 different drives but I wasn't sure. Thank You for your time!

aside, if it is supported or not:
A backup is a crucial element in your set-up - is it wise to 'stress it' as a working drive for video-editing ...... ?
or, vice versa:
The moment, Time Machine launches, your working drive drops its performance by half or even more.
Plus, depending on your settings, the drive is forced to copy tons of data from partition I to partition II ... due to, a partition is no 'real'/physical drive, this stresses a drive extremely .....
drives are sooo cheap. and drive-space should never be an 'issue' while movie-making ..

Can't get more than one month of backups with Time Machine

I seem to be having persistent problems with TM. I have a 1TB HD and in the past I have been able to get up to several months of backups from around 140GB with exclusions. However, lately I seem to be plagued with "SystemFlipper" messages that start a full backup and result in the removal of previous backup such that I seem unable get have more than just over one month of backups. This seem to occur mostly at the first backup of each day and then works fine for each subsequent hour after doing the "Full Reset" as per Pondini (http://pondini.org/TM/A4.html). Other days it seems to work fine.
I have been reviewing other related discussion in this forum and cannot seem to find an answer. It is possibly to do with residual pre-Intel programmes is the best I can determine, but the problem is how to find the culprits in my list of applications either remove them all together or transfer them to another HD I use for non-essential data and files. I have done this for a lot of other data and have added exclusions for some file that were giving me identified issues.
Would appreciate any suggestions as I'm getting a little frustrated at having to do a reset so often, and not being able have a greater time period of backups given that there was a time when I had nearly a year's worth.
Thanks, Dave

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can you configure a WD external to work with Time Machine??

I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
Here are a few questions...
Any ideas on how to format the drive so it will work with Time Machine?
Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
Thanks in advance,
Todd.

You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

Can I backup two Apple computers to one hard drive with time machine?

I have a 2007-vintage MacBook Pro running iOSX 10.6.8 and an iMac running 10.5.8 -- Can I use a single external hard drive along with Time Machine to backup both of these computers without any problems? The hard drive has already been backing up the iMac for a few weeks now and the SeaGate drive had to be reformatted to do that. How will I be able to separate the information saved on the hard drive to know which computer is which? (i.e., how "smart" is Time Machine's file structuring when it makes a backup?)

Do you mean you want to connect a USB drive to the TC? If so, it will recognize a disk formatted in FAT32, but not ExFAT or NTFS.
If you mean you want a Windoze-like partition on the TC's internal HD, that's a bit trickier, since it can't be partitioned. But you could create a disk image on it via Disk Utility, formatted MS-DOS (FAT) aka FAT32, or ExFAT (I'm not entirely sure if ExFAT would work in a disk image there, but it might.)

How can i Migrate from EJB Application to Hibernate

Hi ,
i have developed web services using EJBs. can i create web services for my hybernate application. can anybody please help me for that??
please advice me how can i Migrate from my EJB Apps to Hibernate.
thanks & Regards,
nagalaxmi

Hi
Check this link
http://www.devx.com/Java/Article/27954
Sameer

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened." My HD failed and I'm Trying to get everything back... Can anyone make a suggestion?

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened. Make sure that all of your network devices are connected and turned on. It appears that some backups are already in use. If you don't see the backup you need, make sure it is not currently mounted by another machine and try again."
My HD failed and i installed a new one... I'm Trying to get everything back... Can anyone make a suggestion?

Read the section E about restore issues.
http://pondini.org/TM/Troubleshooting.html
But you should be able to mount the sparsebundle and backup the major items if they are not damaged. You might also do a disk verify to see if the corruption can be repaired.
Have a look here also for restore of selected items.
http://pondini.org/TM/FAQ.html

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Can't migrate from 10.8 to 10.9 with Time Machine

Similar Messages

Maybe you are looking for