Can't migrate from G4 to new iMac

I just brought home my new iMac today and can't transfer my info from my G4. It finds the firewire, but on the screen that calculates the size of the volumes to transfer it only finds the network. The users, applications and file sizes just "calculate", it just hangs and does nothing. I've waiting over 20 minutes for something to change and nothing does.
What am I not doing to get the info from old to new?

Welcome to Apple Discussions,
You can get better help if you post everything about your two computers: system, ram, devices connected etc.
The way you connected both computers.
Just in case you don't know, for me it has worked this way.
Permissions repaired in the old Mac
Both connected via firewire - the iMac first - the old one started holding down "T" key - in Utilities Folder "Migration Assistant" will guide you.
Hopefully this can help you

Similar Messages

Migration from old to new iMac do you need to use set up on new or go straight to migration?

Just got a new iMac and going to migrate from my old 2008 iMac, info from Apple Support is a bit confusing but I want to know if it is best to use the "Set Up" on new iMac before migration or go straight into migration.
Also the support info says to connect both using ethernet as one option (which is my option) and connected to your network, how do you do this as there is only one ethernet port on each machine and if connected together it would not be possible to connect to a network, ie, the internet via my ISP. Suppot says no router etc needed.
Somewhat confused so if there is anyone out there who has done this I would appreciate their comments.
Thank you for any help forthcoming.
Derek

How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661
How to transfer data from a PC to a Macintosh: http://support.apple.com/kb/HT1408

Got new iMac, I had completed the migration from PC to new Apple computer, but still unable to see the files on the iTunes

got new iMac, I had completed the migration from PC to new iMac, but still unable to see all the apps and music that were saved from the old PC to new iMac. Please help.

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

I MIGRATED MUSIC AND PHOTOS FROM PC TO NEW IMAC VIA ETHERNET/MIGRATION ASSISTANT. IT SAID that job was completed but i cannot find anyof my stuff. where is it?

i cannot find music, photos or documents after migrating from pc to new imac. both computers said transfer was successful but i cannot find anything. where is it?

It went to a new user Account.
Go to: Apple > System Preferences > Users & Groups to see the new Account.
For more info, see > About Windows Migration Assistant
Notes
This process will create a new user account on your Mac that contains the data migrated from the Windows PC. It will not merge the information with any existing user accounts on your Mac.
This article only applies to migrating from a Windows-based PC to a Mac. For assistance with performing a migration from one Mac to another, please see How to use Migration Assistant to transfer files from another Mac.
Windows-specific file types, such as .exe files, are not transferred.
You will need to enter your password when you first use an account, such as when you use your transferred email account in the Mail application for the first time.

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files Tried to do as a backeup t

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files

I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
regards

Can I migrate from PowerBook g4 to a new MacBook Air

I have a non intel PowerBook g4 Can I migrate from PowerBook g4 to a new MacBook Air

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
2. Screensavers written for the PowerPC System Preference add-ons
3. All Unsanity Haxies Browser and other plug-ins
4. Contextual Menu Items
5. Applications which specifically require the PowerPC G5 Kernel extensions
6. Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
1. Intel In Macs
2. Apple Guide to Universal Applications
3. MacInTouch List of Compatible Universal Binaries
4. MacInTouch List of Rosetta Compatible Applications
5. MacUpdate List of Intel-Compatible Software
6. Transferring data with Setup Assistant - Migration Assistant FAQ
7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake
      or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and
       registration screens, but do NOT migrate data over. Get to your
       desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
      Late 2008) - What to do if migration is unsuccessful;
b. MacBook Air - Migration Tips and Tricks;
c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
      wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened." My HD failed and I'm Trying to get everything back... Can anyone make a suggestion?

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened. Make sure that all of your network devices are connected and turned on. It appears that some backups are already in use. If you don't see the backup you need, make sure it is not currently mounted by another machine and try again."
My HD failed and i installed a new one... I'm Trying to get everything back... Can anyone make a suggestion?

Read the section E about restore issues.
http://pondini.org/TM/Troubleshooting.html
But you should be able to mount the sparsebundle and backup the major items if they are not damaged. You might also do a disk verify to see if the corruption can be repaired.
Have a look here also for restore of selected items.
http://pondini.org/TM/FAQ.html

Migration Date when migrating from classic to new g/l

Hello gurus,
I am planning a migration from classic to new g/l, but this fiscal year it will be not possible to finish phase 0 (from migration model plan). Is it possible to do it in the middle of the new fiscal year, what are the withdrawls or issues? what do you recommend me? What strategy can I use?
Thanks,
Silvia Guillen

Hi Silvia,
There is differnce in migration date & activation date. Migration date will always be the firts day of new fiscal year.
But as on migration date you have to bring your config changes to PRD.
For details please check the following link -
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=812919
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1070629
Regards,

HT3231 Can I migrate from a power PC G4

Can I migrate from a power PC G4 to a new Macbook Pro?

Read the information in the article - Intel-based Mac: Some migrated applications may need to be updated

Can i install bootcamp on the new iMac late 2012 "27"?

can i install bootcamp on the new iMac late 2012 "27" without fushion drive?

You have two possibilities:
1. Buy the USB SuperDrive and install Windows from a disc.
2. Use an USB drive with the Windows 7 installer inside.
Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition

How can i Migrate from EJB Application to Hibernate

Hi ,
i have developed web services using EJBs. can i create web services for my hybernate application. can anybody please help me for that??
please advice me how can i Migrate from my EJB Apps to Hibernate.
thanks & Regards,
nagalaxmi

Hi
Check this link
http://www.devx.com/Java/Article/27954
Sameer

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

After shop did migration, from Pro to new Pro my whole file structure is lost. Everything is in Destop folder, inc all music. Any ideas. tia?

After shop did migration, from Pro to new Pro my whole file structure is lost. Everything is in Destop folder, inc all music. Any ideas. tia.

Bring it back to the shop.

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

post in the vmware forum or call vmware customer support.

Can't migrate from G4 to new iMac

Similar Messages

Maybe you are looking for