Can't Modify WCS Report File Destination

Once I upgraded to WCS 6.0.132.0 I can no longer change the destination file location when I run reports. The reports seem to run on schedule but they end up in the default location of C:\WCSFTP\reports\. I would like to change that to my E: where I have more space to save reports. Before version 6.0.132.0 I was able to do this.

Oops, I sent the wrong screenshot.
Go to administration -> settings and you can change the folder there.
You can not customize the file name but surely you can change the location to save the files.
See file attached.

Similar Messages

I can not install any addons as firefox throws an error saying " firefox can not modify the needed file"

whenever I try to install an addon, firefox says it can not install the addon since it can not modify the needed file! Whatever addon I have are from my previous version of firefox.

Is the date / time set correctly on that PC? <br />
Right-click the Time in the System Tray and select Adjust Date / Time to see.

How can I redirect Batch Report Files to a different directory.

I have a custom version of the Batch Process Model that allows for on the fly report updates. At the end of execution the final report is written. I need to redirect this final report to another directory, but I am having trouble identifying where the report directory is specified. Right now, it is writing in the same directory as the sequence file and I need to change this.

Hi Terry,
have a look at the following inside the process model TestUUTs (or Single Pass)
Locals.ModelData.ReportOptions.DirectoryType
set this to "SpecificDirectory"
then in
Locals.ModelData.ReportOptions.Directory
set this to your target directory.
If it's a permanent setting, then I'd suggest updating these values before run time in the report options panel from the Configure menu option.
If it can be determined before the sequence is run, then you could do it as part of the report options callback. Otherwise, slot it in as and when needed, just before the call to the Determine Report File Path and Determine UUT Report File Path steps, although I guess that depends on how much you've modified the process model so far.
Hope that helps
S.
// it takes almost no time to rate an answer

Modify UUT report file name

Hello,
I use TesStand 3.1 in Batchmode with 4 Testsockets and generate a XML Testreport for every UUT with the serial number in the file name.
I leave the "Enter UUT Serial Number" dialog boxes at the begin empty.
After that i read out the Serial Number of my UUTs at the runtime via CAN and use the "PostUUT-Callback" to modify the "Parameters.UUT.SerialNumber".
Because of that the UUT Serial Number appears in the Report Header.
But the report filename is always "Report[NO_UUT_SERIAL_NUM0][date][time].xml".
Is it possible to modify the "UUT Serial Number" in the Report File Name, too?
Thanx for your answers!
Greetz ALIEN

We modify the report name to include error count, Model, build, etc. but it requires that the Report be complete at that point (file no longer locked by TestStand).
In order to do this, you'll need to create a Sequence (with no Process Model) to call the test sequence using Subsequence call with the "Run Sequence in a New Execution" selected in the "Specify Module", Multithreading selection ring.
There may be other ways to do what you're attempting, but this gives you freedom to rename the file.
Mike

OATS Reporting: how can I modify edit reports?

Hello people,
I'm using pretty extensive OATS in my company. I'm trying to modify the test result reports in order to have greater overview of the testing process. I've tried to search in the documentation but I wasn't able to find any useful information. Do you know in which Class particularly is the creating the result report for the script. Can I specify what report formats could be created? Thank you all.

I'm pretty sure you can't but the report is also generated in XML & CSV you can play with.
Or you can also manually create a function called at each step groups wrting your own information into a file.
JB

Can I modify a pdf file containing a signature field prior to download?

I have a pdf file I use as a template and in my .net application I fill in a few fields using pdfstamper, iTextsharp, etc. I'm new to this.
That all works.
I also have a signature field in my document.
After I modify the fields, with the person's name, etc., I download it to the client machine, open it in Adobe Reader X, and ask the user to sign the document.
I get an error saying "This document enabled extended features in Adobe Reader. The doc hsa been changed since it was created and the extended features are no longer available......"
Is there a way for me to do what I'm trying to do? I hope this is somewhat clear. It appears that modifying the fields with itextsharp is what's causing the error to occur.

Thank you for the replies.
More specifically, here's what I'm doing. There's a desk where people come to pick up a gift card. When someone picks one up, a clerk runs this .net program, selects the persons name form a dropdown list, I modify a pdf file (using iTextSharp), by adding the person's name, the serial number of the giftcard, etc, download this file to the client desktop, where the person signs using an ePad. Then the clerk saves that pdf file.
The clerk will not be able to go into the menus and remove and/or save Reader Usage Rights. Is there a way through code that I can add Reader Usage Rights after I modify the file. It sounds from your replies that that's what I need to do.
Also, I don't really care about the official "signature", security, certificates, etc. I just want someone to be able to scribble onto the document using a signature pad.
I do have Acrobat Pro X and LiveCycle. (I assume that means I have LCR Extensions.)
Dave

How can i modify my report to print in duplex mode ?

Hello, I have a report to print orders (i use vb6 and CR XI-R2 at runtime with CrystalActiveXReportViewer object) but now i must print the payment conditions on the back of each order. What is the way to modify my report to do that.
(Is there somewhere examples of duplex printing report?).
Thanks in advance.

Hi Ludek,
I have imported the reg key but i have the same problem: you must install SP2 or SP4 before.
Here is my reg key :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94FB0978-D094-40C7-91D7-834D39220D4A}]
"AuthorizedCDFPrefix"=""
"Comments"=""
"Contact"=""
"DisplayVersion"="11.5.8.82627"
"HelpLink"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,\
70,00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,\
00,6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,\
00,00
"HelpTelephone"=""
"InstallDate"="20080416"
"InstallLocation"=""
"InstallSource"="C:
CRXIR2SP2Full
win32
"ModifyPath"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,78,\
00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,00,\
38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,39,\
00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,00,\
30,00,44,00,34,00,41,00,7d,00,00,00
"Publisher"="Business Objects"
"Readme"=hex(2):68,00,74,00,74,00,70,00,3a,00,2f,00,2f,00,73,00,75,00,70,00,70,\
00,6f,00,72,00,74,00,2e,00,62,00,75,00,73,00,69,00,6e,00,65,00,73,00,73,00,\
6f,00,62,00,6a,00,65,00,63,00,74,00,73,00,2e,00,63,00,6f,00,6d,00,2f,00,00,\
00
"Size"=""
"EstimatedSize"=dword:001bcc81
"UninstallString"=hex(2):4d,00,73,00,69,00,45,00,78,00,65,00,63,00,2e,00,65,00,\
78,00,65,00,20,00,2f,00,49,00,7b,00,39,00,34,00,46,00,42,00,30,00,39,00,37,\
00,38,00,2d,00,44,00,30,00,39,00,34,00,2d,00,34,00,30,00,43,00,37,00,2d,00,\
39,00,31,00,44,00,37,00,2d,00,38,00,33,00,34,00,44,00,33,00,39,00,32,00,32,\
00,30,00,44,00,34,00,41,00,7d,00,00,00
"URLInfoAbout"=""
"URLUpdateInfo"=""
"VersionMajor"=dword:0000000b
"VersionMinor"=dword:00000005
"WindowsInstaller"=dword:00000001
"Version"=dword:0b050008
"Language"=dword:00000000
"DisplayName"="Crystal Reports XI Release 2"
Hope this helps you.
Just a precision : the message 'can't load data' not occures on all PC with runtime, At work i have installed runtime on 3 PC's (XP) and it works, problem occures when i 'm connecting to my customer's server (windows 2003 server SP2) via tse.

Can't save a report file in the Reports Builder

dev environment : w2k, Oracle92iDS(rel 2) and patch set 9.0.2.2.0
Problem description :
Saving a report corrupts the report file(jsp, rdf) in the reports builder, when a report has the bind variable used in the functions.
I can execute the report well, if I don't try to save .
The moment the file is saved and the report can never be reopened and run.
Please note it works fine when there is no bind variabled used in the function. Here are the steps to reproduce.
Can someone verify this, if so is there an workaround for this problem on the Reports Builder?
===
set serveroutput on
create or replace
package Q_REP_test
as
type drec is record
sdate date
type dreccursor is ref cursor return drec;
Procedure Get_sysdate(retdate out dreccursor);
procedure add_days_tocurdate(no_of_days in number, retdate out dreccursor);
end q_rep_test;
show errors
create or replace
package body q_rep_Test
as
procedure Get_sysdate(retdate out dreccursor)
is
begin
open retdate for
select sysdate retdate from dual;
end;
procedure add_days_tocurdate(no_of_days in number, retdate out dreccursor)
is
begin
open retdate for
select sysdate+no_of_days retdate from dual;
end;
end q_rep_test;
show errors
===
Invoke the SP as follows:
===
function QR_1RefCurDS return q_rep_test.dreccursor is
tempc q_rep_test.dreccursor ;
begin
q_rep_test.add_days_tocurdate(:p_1,tempc);
return tempc;
end;
===
1. Create a report
2. create an user parameter(p_1)
3. add a pl/sql as above
4. run it(to verify the report works)
5. save it.
6. close the report
7. Open it again, you get an as
"REP-0002: Unable to retrieve a string from the Report Builder Message file". Now it is corrupted and can't be used at all.

Mac OS X 10.9.2
MacBook Pro Retina 15" Late 2013 w/ nVidia GT 750M
Adobe Audition 6.0 Build 732 (64 bit)
Downloaded WAV file from internet in a ZIP. Unzipped it. Played it in iTunes. Quit iTunes. Right clicked the file and chose Open With and Adobe Audition CC. I'm pretty sure this is the first time I've opened Audition on this computer, since I just recenly upgraded from an older MacBook. Edited the WAV, had the issue. Read the forums, closed and was prompted to save. Saved and then it finished closing. Right clicked on the file again and chose Open With and Adobe Audition CC. Now the file gave me the option to Save or Save As depending on how much further I edited the file, which was just cutting out more of the track. The razor tool, though, still not available. Had to put the cursor where I wanted, then used the Shift and Home buttons to select the beginning part of the track and the Delete key to remove it.

How can I change the report file name depending on which seq file is run in the main seq?

I'm using TestStand 3.0.
I have a main sequence file with a menu option to select one of several sequence files to run.
How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name?
Thanks
Harminder

Hi Harminder
Try RunState.Root.Locals.ReportFilePath = "PathToMyFile.xxx"
regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Can I generate a report file in 'real-time'?

Hello all,
My question concerns reports in Teststand. Currently, the report is not generated and no results are saved until the entire execution is complete. This is OK if there are no problems during the execution (which can take several days), such as the PC locking up, etc. If this happens, the all the results are lost!
This has happened twice now, so I was wondering if there's a way to set it up to record the results as the test is run, and generate the report file at the same time. Basically, so if a problem crops up, we can reboot the machine, or restart the testing, and all the results we had before the problem will be recorded.
I'm probably making this way more difficult than it needs to be!
Thanks in adva
nce,
Dave Neumann
[email protected]

Dave,
I am doing all our report generation in text mode, as I didn't want to use the html format for legacy reasons. Without looking at your implementation I cannot say why it's doing what it is... However, I know that I talked with NI Tech Support when I implemented this example over a year ago, so they should be able to help with getting the example to work with the default process model. You should be able to set some break points to see what's happening in the process model after each step to see why you're not seeing any results on the fly. I do remember that it required some copying and pasting from several sections in the process model. Once you get it running properly, stepping through it should give you a good idea of where you'd want to ad
d a routine that writes to a log file as the tests are conducted.

Can I modify a Pages file on my IPad that is stored on the iDisk and then save the updated file back to the iDisk?

As the title states... I have Pages for the iPad and I need to be able to modify the files and store them on the iDisk for access anywhere. Is this possible? Thanks C

In a word "Yes". You need to download and install the free iDisk app from the iTunes Application Store. After that, it is pretty intuitive how to do it. You can also share the document via iWork.com.
Message was edited by: Joe Bailey

CAN NOT TRANPORT INFOSPOKE FLAT FILE DESTINATION PATH

Hi,
I am writing from infospoke to a flat file in application server. When I transported this to QA, Application server Check box is unchecked and path is changed to path in QA.
Do I need to have Logical File name in order to transport. If I have 5 infospokes do I need to have 5 logical file names or is there any way to pass a parameter ... .
Is there any other way to transport with out having File Name option instead of Logical File name?
Thanks
Krishna

Hi Krishna,
You would need an ABAP program to change the entry in the table RSBFILE.
First try this. Goto se11 -> RSBFILE -> give your Infohub name and check if you have authorization to change the path.
ELSE..
Write an ABAP program and update the field.
REPORT test.
tables: RSBFILE.
update RSBFILE set PATH = '<your path>' where OHDEST = <your Infobub>.
Bye
Dinesh

How can I modify the presentation file ( *.ser ) using external tools ?

Hi All,
When build, the presentation will be saved as "*.ser" files. How can i edit them using some external (not within the ALBPM5.7 studio) tools for decoration?
thanks a lot
Jack

As long back as I can recall Adobe has always used the UNC-path for it's links.
At least back to CS2. Before that and my memory is a bit blurred.
We ourselves are using CS3/CS4, with UNC-paths, on 300+ clients without any problems at all.
Their drives are mapped to a drive-letter, but InDesign still resolves the UNC-path. This has works flawlessly so far.
When we experience issues that related to our network then it's usually something else that is to blame.
So far embedded images and IP-phones and been the major culprits.
But I'm not a network-savvy at all so don't take my words for it.

How can I modify xml report body content ?

I am trying to modify the Teststand XML report to display the actual datasource name instead of "numeric" when I used a Numeric Limit step. In other words, I want to be able to rename the "numeric" label with something of my choice.
I saw some examples on report modifications, but nothing to the point.
Thanks,
Sam

Hi,
Is the following link any help
http://zone.ni.com/reference/en-XX/help/370052H-01/TOC39.htm
Regards
Ray Farmer

FF 4.01 will not install Adblock Plus because FF says it "can't modify a needed file." How to fix.

MacPro (1,1). No such problem with FF 4.0.0. MacOSX 10.6.7. 16GB Ram. Error msg for update doesn't say incompatible with 4.0.1

i found the profile file, but couldn't find any .xpi file or folder in it.

Can't Modify WCS Report File Destination

Similar Messages

Maybe you are looking for