Can't mount anything after e2fsprogs update

I can't mount any cd/dvd, usb flash drive after e2fsprogs update. Here is what I get after inserting 8GB flash with ntfs and 512MB fat32 flash...
It shows up in nautilus as a device but i can't mount it at all, no errors are shown...
Sep 21 14:27:47 vostro kernel: [ 735.983176] usb 2-1: new high speed USB device using ehci_hcd and address 3
Sep 21 14:27:47 vostro kernel: [ 736.100935] usb 2-1: configuration #1 chosen from 1 choice
Sep 21 14:27:47 vostro kernel: [ 736.156481] Initializing USB Mass Storage driver...
Sep 21 14:27:47 vostro kernel: [ 736.157220] scsi5 : SCSI emulation for USB Mass Storage devices
Sep 21 14:27:47 vostro kernel: [ 736.157402] usb-storage: device found at 3
Sep 21 14:27:47 vostro kernel: [ 736.157405] usb-storage: waiting for device to settle before scanning
Sep 21 14:27:47 vostro kernel: [ 736.157428] usbcore: registered new interface driver usb-storage
Sep 21 14:27:47 vostro kernel: [ 736.157432] USB Mass Storage support registered.
Sep 21 14:27:52 vostro kernel: [ 741.158402] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Sep 21 14:27:52 vostro kernel: [ 741.158778] sd 5:0:0:0: Attached scsi generic sg2 type 0
Sep 21 14:27:52 vostro kernel: [ 741.159467] usb-storage: device scan complete
Sep 21 14:27:52 vostro kernel: [ 741.167628] sd 5:0:0:0: [sdb] 15695872 512-byte logical blocks: (8.03 GB/7.48 GiB)
Sep 21 14:27:52 vostro kernel: [ 741.168872] sd 5:0:0:0: [sdb] Write Protect is off
Sep 21 14:27:52 vostro kernel: [ 741.168881] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
Sep 21 14:27:52 vostro kernel: [ 741.168886] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Sep 21 14:27:52 vostro kernel: [ 741.171113] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Sep 21 14:27:53 vostro kernel: [ 741.171123] sdb: sdb1
Sep 21 14:27:53 vostro kernel: [ 741.386723] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Sep 21 14:27:53 vostro kernel: [ 741.386733] sd 5:0:0:0: [sdb] Attached SCSI removable disk
Sep 21 14:28:58 vostro kernel: [ 806.838311] NTFS driver 2.1.29 [Flags: R/W MODULE].
Sep 21 14:28:58 vostro kernel: [ 806.848322] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Primary boot sector is invalid.
Sep 21 14:28:58 vostro kernel: [ 806.848332] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
Sep 21 14:28:58 vostro kernel: [ 806.848340] NTFS-fs error (device sdb): ntfs_fill_super(): Not an NTFS volume.
Sep 21 14:33:14 vostro kernel: [ 1062.798189] usb 2-3: new high speed USB device using ehci_hcd and address 4
Sep 21 14:33:14 vostro kernel: [ 1062.916091] usb 2-3: configuration #1 chosen from 1 choice
Sep 21 14:33:14 vostro kernel: [ 1062.924511] scsi6 : SCSI emulation for USB Mass Storage devices
Sep 21 14:33:14 vostro kernel: [ 1062.924766] usb-storage: device found at 4
Sep 21 14:33:14 vostro kernel: [ 1062.924772] usb-storage: waiting for device to settle before scanning
Sep 21 14:33:19 vostro kernel: [ 1067.925385] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Sep 21 14:33:19 vostro kernel: [ 1067.925753] sd 6:0:0:0: Attached scsi generic sg3 type 0
Sep 21 14:33:19 vostro kernel: [ 1067.928538] usb-storage: device scan complete
Sep 21 14:33:19 vostro kernel: [ 1067.934135] sd 6:0:0:0: [sdc] 978688 512-byte logical blocks: (501 MB/477 MiB)
Sep 21 14:33:19 vostro kernel: [ 1067.936023] sd 6:0:0:0: [sdc] Write Protect is off
Sep 21 14:33:19 vostro kernel: [ 1067.936028] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
Sep 21 14:33:19 vostro kernel: [ 1067.936030] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Sep 21 14:33:19 vostro kernel: [ 1067.938453] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Sep 21 14:33:19 vostro kernel: [ 1067.938457] sdc: sdc1
Sep 21 14:33:19 vostro kernel: [ 1067.942248] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Sep 21 14:33:19 vostro kernel: [ 1067.942264] sd 6:0:0:0: [sdc] Attached SCSI removable disk
Arch x86_64, Gnome
Linux vostro 2.6.31-DELL #1 SMP PREEMPT Thu Sep 10 09:39:12 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz GenuineIntel GNU/Linux
Last edited by combuster (2009-09-21 12:36:37)

Ok, it's not kernel either, I've upgraded gnome to 2.28 and now it reports "Can not mount LABEL, Not authorized"
at /etc/group
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon,combuster
mem::8:
kmem::9:
wheel::10:root,combuster
ftp::11:
mail::12:
uucp::14:
log::19:root
locate::21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:combuster
audio::92:combuster,mpd
optical::93:combuster,hal
floppy:x:94:hal
storage:x:95:combuster,hal
scanner:x:96:
power:x:98:combuster
nobody::99:
users::100:combuster
dbus:x:81:
combuster:x:1000:
policykit:x:102:
hal:x:82:combuster
avahi:x:84:
camera:x:97:
gdm:x:120:
mpd:x:45:
vboxusers:x:108:combuster
Last edited by combuster (2009-09-22 11:17:12)

Similar Messages

  • I can't launch Mail after i update the OS to X Yosemite

    I can't launch Mail after i update the OS to X Yosemite.

    can't open mail after installing yosemite

  • Can't steam video after latest update on my I pad mini!

    Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

    If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
    (109113)

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • I can not login Flickrs, after I update IOS 8.0.2 ?

    I can not login Flickrs, after I update iOS 8.0.2 ?

    I tried hard reset by press both power and home button.
    I can not hear music played through the speaker. Just music only.
    The speaker workes well with imcomming call or out going call by turn on loud speaker.
    Linh.

  • HT5622 Why can't I purchase after I update my payment detail?

    Why can't I purchase after I update my payment detail?

    My first suggestion would be to double check and make sure that the changes were saved in the payment information area of your account, to back and check to be sure.
    Settings>iTunes and App Stores>Apple ID> Tap your ID. Then Tap View Apple ID. Enter your password and go to Payment Information and check. Check the expiration date, biling address, security code, etc. and then save your changes.
    If everything is done successfully, you will get an email from Apple notifying you that they received changes to your account and if these changes were not made by you... Etc, etc. When you get that email, you know that the changes have been confirmed.

  • Cannot mount anything after upgrade to 10.5.1 (external WD drive & .dmg)

    Hi It's my first time here.
    After I update My Imac G5 to leopard and run true many problems, thank to time machine because I had to restore my entire disk twice.
    I update to the lastest level of Leopard 10.5.1. Since that update, Leopard doesn't see my extarnal disk WD 500GB and when it try to mount-it, there is errorlog that said it's not a good format. Also Leopard refuse to mount any .dmg file.
    I download the 110MB 10.5.1 update because I tought the automatic download is not the same. But again, it refuse to mount the .dmg file!!!
    Maybe I missed something basic here. I am realy stuck...
    Any idea of what is the problem?
    Thanks in advance.
    iMac G5, 2GB-RAM, 250GB internal, 500GB external.

    Regarding the .dmg problem see this thread:
    http://discussions.apple.com/thread.jspa?messageID=5522469&#5522469
    As to the external, does the drive appear in Disk Utility? If so, can you see how it is formatted?

  • Qosmio X300 - Can't write disk after firmware update

    I have a serious proble. After a firmware-update for my pioneer dvd-drive I can't write anything anymore on disks.
    I really need some help there

    I just received my new drive and installed it on my Qosmio x300 13E.
    It is a LG GBW-T10N drive and it works perfectly. The included software allows me in combination with the newest driver for the nvidia gforce x9800 graphic controller to upscale films to a full HD resolution.
    It is absolutely amazing. I just had to try it with a normal dvd and I had a full HD entertainment on my flat screen tv.
    The replacement of the broken drive was easy. You simply need to loosen one screw on the bottom of the notebook and then you simply pill it out.
    If anyone wants to do it too, I can give accurate advice for it.

  • Can't mount drive after changing permissions to 777

    Hey guys,
    I'm having trouble mounting an external hard drive after I changed it's permissions to 777. With "get info" on the disk itself I changed the permissions of me, staff, everyone to read & write access for the whole disk incl. "apply to enclosed items". Now I can't mount it, disk utility tells me it needs repairing, but repair permission and repair disk both fail. It gave me read access at one point but obvioulsy I couldn't change the permissions from there.
    It's a 2TB disk in a JBOD enclosure if that makes any difference and was serving as SMB media server for my home network via USB on my router (Linksys E4200).
    Any help would be greatly appreciated.
    Thanks in advance,
    V

    worked first time I plugged it in so Jolly Giant you are 100% right
    my hub was a powered hub which I chose not to plug in not thinking TM would need power
    my question is why? (this is a rhetorical question not one to you Jolly Giant unless you know why)
    I purchased a hub which is "powerable" but why leave the "brick" plugged in all the time when nothing plugged into it needs the power?
    the external hard disk (at least this model) has power of its own
    the printer has power on its own
    the Time Capsule has power on its own
    All 3 were functioning as expected except in Time Machine when I chose to not plug the hub in
    Looks like I will have to burn a little extra energy and plug in my USB hub just to make Time Machine function - this seems fuelish

  • Can't launch Safari after Software Update

    I can't start Safari anymore and I don't know what to do. In short, click on the dock and no bounce. Double-click on the icon within Applications and it doesn't launch either. These problems, I'm guessing are a result of the combination of objects delivered by Software Update yesterday. Based on the log below, I installed the following:
    2006-05-29 22:05:53 -0700: Installed "Pages Update" (1.0.2)
    2006-05-29 22:05:58 -0700: Installed "Apple Intermediate Codec" (1.0.1)
    2006-05-29 22:06:12 -0700: Installed "Keynote Update" (2.0.2)
    2006-05-29 22:06:52 -0700: Installed "GarageBand Update" (2.0.2)
    2006-05-29 22:07:42 -0700: Installed "iPhoto Update" (5.0.4)
    2006-05-29 22:08:04 -0700: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
    2006-05-29 22:09:01 -0700: Installed "QuickTime" (7.1)
    2006-05-29 22:09:43 -0700: Installed "iTunes" (6.0.4)
    2006-05-29 22:10:02 -0700: Installed "iPod Updater 2006-03-23" ( )
    Additional problematic behavior includes:
    (1) other applications saying OS X is not 10.3.8 or higher
    (2) can't launch Software Update from the Apple menu or from the "About This Mac" window
    (3) can't see the system version in "About This Mac" (shows the serial number instead)
    (4) can't run a bunch of other apps (Dashboard, iMovie, iChat, Sims 2 University)
    Any clues? Am I in the right forum?
    iBook G4   Mac OS X (10.4.2)  

    (3) in About This Mac click on the serial number and it should cycle through the Mac OS version, build, and serial number. Run Repair Disk Permissions then run Software update again. There might be other updates available. After each update run Repair Disk Permissions.

  • Can you do anything after sendRedirect()

    I'm not able to test this myself as I don't have a development environment set up, but this is my question.
    Is it possible to do anything after a call to sendRedirect(), e.g. setting cookies, additional checking? The javadocs say that if the response has been committed, this method throws an IllegalStateException. Is it possible to do anything after a call to sendRedirect(), such as writing to a response, adding cookies?
    Here is some code which may explain my question:
    protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
              String username = request.getParameter(USER_ID);
              response.sendRedirect(anotherUrl);
                                              // is this even possible????
              response.addCookie(new Cookie("Login", "true"));
         }

    I just tested this with the following code:
    public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
    Cookie[] cookies = request.getCookies();
              for(int i = 0; i < cookies.length; i++) {
                   Cookie c = cookies;
                   LOGGER.info("Cookie: " + c.getName() + ", " + c.getValue());
    response.sendRedirect(someURL());
    response.addCookie(new Cookie("Login", "true"));
    Basically it will print all cookies in the request. On the first doPost, it does the redirect before adding the Login cookie. On subsequent doPost's the Login cookie was not printed out, the only cookie I found was the JSESSIONID, which was expected. So you can't set cookies after a redirect.

  • Can't Open Mail after security update 10.6.8

    I can not get the mail app to run.  This is the error message I keep getting.
    Did the SecUpd2012-004 update.
    After the update, I had (and still have) 2 copies of mail in my application folder.
    I've repaired my permissions.
    Tried to got back using the time machine (that was a waste of hours).
    Also, deleted the mail app (8.1) and then reinstalled the SecUpd2012-004.
    Only thing I haven't done is to do the Combo 10.6.8 update.
    I've noticed that other people are starting similar threads.  Anybody have a solution?  I've been working on it all day and no joy.
    Thanks in advance.

    Well, I thought that we might have had a solution, but no such luck.
    I did the combined update - and after that I had only one Mail app in the applications folder (encouraging) - and it appeared to be the correct one by it's icon.
    Thought about doing a repair permissions but didn't do it after the combined update.
    After the combined update, I did the secUpd, the second mail app was there with it's generic icon again and
    Needless to say, I'm back to square 1.
    So, I'm thinking I've got some options here.  One of my options would be to get another HD, slug it into one of the open HD slots, take out my 10.6 CD format it and then if possible use time machine to put that drive in the state where everything worked right before the update.  This would seem to be the fastest, time wise way of making the issue go away.
    You guys think I could / should delete the 4.6 mail app and start over with the combined update and then do a permissions repair after the update?

  • I can't send email after iOS7 update...

    I can't send email after the iOS7 update....this is a show stopper for me.   When is a fix expected?

    First it would help if you explain exactly what happens when you send an email. 
    Do you get an error message?
    If so what does the message say?
    The abilitly to send or receive emails does not fall on Apple or the IOS 7.
    You email provider gives you that ability.
    Double check and make sure your outgoing mail server is correct.

  • IPad2 won't connect to anything after IOS6 Update

    Does anyone have any new ideas how to make an iPad2 connect to iStore/Internet/Anything network related after IOS6 Update?
    I have tried everything listed on Apple support Communities including release and renew IP/ Hard reset the iPad/ Let it go completely dead and give it a full charge before rebooting/Forget the network and rest all my settings/ Hard reset my router/Change my router channel. Shall I go on
    I even took the ipad to the Apple Genius Bar (or should I say Minimum wage High School student bar) Where I was told that the ipads connection problem was my router when they couldn't get it to connect in the store. I guess if I had a better router the ipad would be able to connect to it half way across the city.
    Well anyway it's been 3 months since I have been able to use my ipad2 so if no one here knows how to make it work it's galaxy note 10.1 time I already upgraded my iphone 5 to the Galaxy Note 2 and couldn't be happier with a phone

    Not related. Installing Lion doesn't make any changes to a wireless router and/or wireless network the computer is connected to that Lion is installed on.
    Try resetting the router. Disconnect all computers and devices connected to your wireless network. Unplug the wireless router from its power source to turn it off. Do the same with the modem the wireless router is connected to. Wait a few minutes followed by plugging your modem back in and allow the modem to completely reset before plugging your wireless router back in to power it back on allowing it to completely reset with a new connection with the modem. Follow this by reconnecting every computer and device to your wireless network.

  • Can't get in after software update

    I did a software update on my Ipad2 & now I have a picture of a cord & ITunes on my screen & I can't do anything.  I tried updating on iTunes but it doesn't work

    My wife's iPad Air has the exact same problem.  She was plugged into iTunes with the USB cable and did the system update to 8.1.3  When the iPad restarted all it displays now is the screen that wants you to connect to iTunes just as Carol describes.  Attempts to connect to iTunes does nothing.

Maybe you are looking for