Can't mount /var/lock at boot time [SOLVED]

I set up my fstab to mount /tmp /var/run and /var/lock to tmpfs. When I boot my computer /var/lock does not mount correctly. If I use mount -a after boot it mounts. How can I fix this?
Last edited by namelessone (2010-12-05 01:49:30)

dmesg doesn't show anything out of the ordinary. During boot I get the message along the lines of "failed to mount /var/lock" (it goes by really fast so I don't remember the exact wording)
fstab says:
tmpfs /var/lock tmpfs defaults,nodev,nosuid,noexec,mode=1777,size=10m 0 0
tmpfs /var/run tmpfs defaults,nodev,nosuid,noexec,mode=0755,size=10m 0 0
/dev/mapper/vol-var /var jfs defaults, noatime 0 1
Last edited by namelessone (2010-12-04 19:57:18)

Similar Messages

  • [Solved]Can't mount external hdd at boot!

    Hi!
    I'm trying to mount my new external hdd (Lacie USB2) at boot, but without success.
    To avoid random device name (sdx, sdy), I would like to use UUID in my fstab file.
    I've read this wiki.
    I think my configuration is ok, but there's an error at boot saying "Device with UUID xxxxxxxx doesn't exist, can't mount it", or something like that.
    Here are some commands:
    [eko@nodrom ~]$ fdisk -l
    Disque /dev/sdb: 500.1 Go, 500107862016 octets
    255 têtes, 63 secteurs/piste, 60801 cylindres
    Unités = cylindres de 16065 * 512 = 8225280 octets
    Périphérique Amorce    Début         Fin      Blocs    Id  Système
    /dev/sdb1   *           1       60801   488384001    c  W95 FAT32 (LBA)
    [eko@nodrom ~]$ /bin/ls -lF /dev/disk/by-uuid/
    total 0
    lrwxrwxrwx 1 root root 10 jui 26 13:06 1da8b247-2a03-4a00-817c-d4da8df63488 -> ../../sda2
    lrwxrwxrwx 1 root root 10 jui 26 13:06 485e9b10-fce5-4cbd-b23a-81f232d23bc5 -> ../../sda1
    lrwxrwxrwx 1 root root 10 jui 26 13:06 6853-5BA9 -> ../../sdb1
    lrwxrwxrwx 1 root root 10 jui 26 13:06 8aa3ce4c-5e2a-48c8-b3c3-38d02b4c0e68 -> ../../sda3
    And my fstab file:
    # /etc/fstab: static file system information
    # <file system>        <dir>         <type>    <options>          <dump> <pass>
    none                   /dev/pts      devpts    defaults            0      0
    none                   /dev/shm      tmpfs     defaults            0      0
    /dev/cdrom /mnt/cdrom   iso9660   ro,user,noauto,unhide   0      0
    /dev/dvd /mnt/dvd   udf   ro,user,noauto,unhide   0      0
    /dev/sda1 / ext3 defaults 0 1
    /dev/sda2 swap swap defaults 0 0
    /dev/sda3 home ext3 defaults 0 1
    #Disque dur externe
    UUID=6853-5BA9    /media/hdd    vfat    rw,user,auto,exec,gid=100,uid=1000,umask=002,iocharset=utf8,codepage=850,shortname=mixed    0    0
    Could someone help me?
    Thanks in advance!
    Last edited by vomix (2007-08-09 17:56:28)

    Hi,
    Thanks for your reply.
    But even with /dev/disk/by-uuid/6853-5BA9 in my fstab file, it fails to automount it.
    It says "Special device with UUID=6853-5BA9 does not exist".
    The weird thing is that I can mount it manually without problems.
    (In fact, that's not true, I've the same problem than steven.  May it be a kernel-related problem?)
    Or maybe there's a fault in the rest of my fstab line? (iocharset, guid, etc?)
    In the case of a kernel related bug, how could I downgrade it?
    I've tried with "pacman -U kernel26-2.6.21.6-1.pkg.tar.gz" in /var/cache/pacman/pkg but it broke my xorg server at reboot.

  • TS4517 Macbookpro can't recognize bootable usb at boot time

    I created a windows usb with bootcamp assistant, "Create a Windows 7 or later version install disk" with a windows 7 ISO image.
    I went through bootcamp's "Install or remove Windows 7" option and partitioned 21GB from my harddisk for my windows partition (it's named "BOOTCAMP", MS-DOS (FAT)).
    I plugged in my usb and restarted my laptop. I pressed option during boot to go into the boot menu. Somehow, my usb stick doesn't show up in the boot menu. I only see my normal boot partition and a recover partition. I tried removing the USB stick while I am still in that menu and plugging it back to see if that will fix the problem. It did not.
    Strangely, I noticed that my USB stick does not light up when I unplugged it and reinserted it when my mac is in the boot menu. Normally the usb stick will light up when inserted into this usb port.
    I thought my ISO is not bootable so I tried another windows 7 ISO and the results remain the same.
    Is it possible that my model is too old such that it doesn't allow booting from USB during boot time? Is it possible that older ROMS do not check for USB drives during boot time (hence explaining why my usb doesn't light up)?
    I can assure you that my usb port is functioning correctly

    I have the same issue on a late 2013 Macbook Pro 15inch. I booted into Recovery mode, and selected to install new Mavericks, and chose my USB drive as the target.
    The installer correctly downloads to the USB, and the bootable USB works fine on my old 2010 macbook pro. However, the USB drive does not show when i boot with option pressed. It is as if the Macbook just dont permit booting from USB - eventhough the drive was created on the very same mac.
    Anyone have a clue as to how to boot from USB?

  • Macbookpro can't recognize bootable usb at boot time?

    I have an old macbookpro:
    Model Name: MacBook Pro
    Model Identifier:   MacBookPro6,2
    Processor Name: Intel Core i5
    Processor Speed:    2.53 GHz
    Boot ROM Version:   MBP61.0057.B0F
    I created a windows usb with bootcamp assistant, "Create a Windows 7 or later version install disk" with a windows 7 ISO image.
    I went through bootcamp's "Install or remove Windows 7" option and partitioned 21GB from my harddisk for my windows partition (it's named "BOOTCAMP", MS-DOS (FAT)).
    I plugged in my usb and restarted my laptop. I pressed option during boot to go into the boot menu. Somehow, my usb stick doesn't show up in the boot menu. I only see my normal boot partition and a recover partition. I tried removing the USB stick while I am still in that menu and plugging it back to see if that will fix the problem. It did not.
    Strangely, I noticed that my USB stick does not light up when I unplugged it and reinserted it when my mac is in the boot menu. Normally the usb stick will light up when inserted into this usb port.
    I thought my ISO is not bootable so I tried another windows 7 ISO and the results remain the same.
    Is it possible that my model is too old such that it doesn't allow booting from USB during boot time? Is it possible that older ROMS do not check for USB drives during boot time (hence explaining why my usb doesn't light up)?
    I can assure you that my usb port is functioning correctly (at least during Mac OS X run time).

    That's correct. The DVD drive is the SuperDrive. Unfortunately, you need the original SuperDrive in your computer in order to install Windows, and it's not possible to upgrade the firmware because only Apple provides updates.
    If you haven't got the SuperDrive, you have to buy one and install it again. Fortunately, there's a solution because iFixit sells the original SuperDrive which came with your computer > http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-8x-SATA-SuperDrive-Used/IF161-033?utm_source=ifixit_guide&utm_mediu m=guide_intro&utm_content=required_items&utm_term=macbook_pro_15%22_unibody_mid_ 2010 It's expensive, but it's the only solution.
    To install the SuperDrive, you can follow this how-to > http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Mid+2010+Optical+Drive+R eplacement/3074/1

  • Mounting partition fails at boot time, but works after system is up

    **EDIT: ok, I know now the daemon array comes too late. Looks like I have to fiddle with initial ramdisk or mount the partition daemon-style. Which is recommended?**
    I have a fakeraid array which works well with device-mapper. I use dmraid as a daemon to create the nodes.
    No problem when I mount the partition after boot. But now I want to move my /home there, so it has to mount during boot.
    When I have it inside fstab, I get a corrupt superblock error during boot and arch throws me into an maintainance shell.
    What's wrong? Is fstab processed before the daemon array? If that is the case, what would be a good clean way to launch dmraid if it cannot be a daemon?
    Last edited by mindfall (2008-01-24 01:14:58)

    All you should have to do is put dmraid in the HOOKS line in /etc/mkinitcpio.conf and rebuild your kernel (pacman -S kernel26). This will enable you to even have your root partition on the raid array. Edit /etc/fstab to include your home as usual using the device-mapper created raid-set and correct partition.
    Wiki on dmraid

  • Can I enable Num Lock on boot up via a VBScript in Win 8.1 with Update 1?

    Hope this is the correct place for this - someone directed me to the TechNet Forums from the Windows 8.1 general forum, and then from the 'Windows Forms General' forum to this one (not sure if my thread has been copied/moved to this forum already by one
    of the moderators; if it has, my apologies, but I am not am regular forum user and I don't understamnd most of the shorthand being used by others, whether something is something someone has written as part of a repsonse or an action they have taken, or just
    part of their sign off or what).
    In the good old days of Windows XP, I was able to ensure Num Lock was on at boot up by the use of a small VB Script file, which was this:
    set WshShell = CreateObject("WScript.Shell")
    WshShell.SendKeys "{NUMLOCK}"
    It is really annoying with Win 8.1 that on Boot Up, AND
    every time I want to switch user, Num Lock goes off (even if it was on before switching user).  I want Num Lock to be on at Boot Up AND stay on when switching user.
    I have seen the suggested remedies in other forums about changing the appropriate value in the Registry (which does not work until after logon) and changing the BIOS setting (which does not work because Windows overrules the BIOS setting).  The question
    is whether the VBScript solution will work with Win 8.1?
    If it will, in which folder do I put the Script file in order for it to work for all Users?
    And do I have to make the any changes to Group Policy to make it work, and if so what chnages, as seems to be the case if the OS was Win 7 (mine is Win 8.1 Update 1, and NOT Win 8 Pro).
    Thanks in advance for all technical help on this one.
    Neil

    Hi jrv
    Fine, and I followed your advice straight away (I posted exactly the same question on the GP Forum) and recived one reply about creating a script and using GP to do something.......
    BUT
    as my post above dated 10th September states very clearly:
    "Perhaps I need to add that this is a single, standalone, home PC, with 2 users, running Win 8.1 Core/Basic.  Also, I cannot find the Group Policy Editor on the PC; when I type either 'gpedit' or 'gpedit.msc' into Run, I get a message saying that
    the file canot be found on the PC.  This when logged on as user with administrator powers.  It is not found either from a Command prompt.  And there does not seem to be a GP Snap-in available via the MM Console."
    Given that situation, how on earth do I use Group Policy?
    I am not frustrated with the people who are trying to help me and I have tried everything that people have suggested.  But I am frustrated that people do not seem to be reading my contributions to this debate which are trying, as clearly as I know how,
    to explain what is actually happening at my end.  All I can truthfully say is that NONE of those suggestions that I am able to implement turn NumLock on at initial Bootup before anyone logs on.
    And I do not have access to Group Policy to change or add a new Script of any sort there.  If you are able to tell me how I can do that, then I might well be able to achieve what I want.  But it now seems that, without that, I cannot achieve what
    I want.  If that is the case, then end of.
    Neil
    Ok - you are home y=user with little technical training on deployment and management of desktop systems.  You should be posting in
    htttp://answers.microsoft.com.  This forum is for administrative scripting and not for user PC repair and configuration.  Forget about GP as it is for trained technicians and not for home users.  All you need to
    do on a home PC is to set the registry once.  There is a "FixIt" in the link I posted that will do this for you.
    You can also call the vendor or Microsoft support for help with the issue.  It is in no way a script related problem.
    ¯\_(ツ)_/¯

  • Can I mount external hard drive to Time Capsule and use it as external storage?

    I have a 500GB external hard drive that I'd like to use on the Time Capsule as a hard drive to store mp3 and mp4 files.  Can I attach it to the Time Capsule and use it like this?  Or does it just give an additional 500GB worth of back ups from my iMac?

    Can I attach it to the Time Capsule and use it like this?
    Yes, if the drive has been formatted in Mac OS Extended (Journaled)...preferable....or FAT32. Access to the files will somewhat slower than if you had the drive attached directly to your computer.
    Have you given some thought as to how you will keep this drive backed up?
    Time Machine will not be able to back up the drive that is attached to the Time Capsule's USB port.
    But, it would be able to back up the drive if you connected it directly to your Mac and the drive was formatted in Mac OS Extended (Journaled).

  • Boot time goes from seconds to minutes with udev and systemd

    A few weeks ago updated and saw that on reboot I was getting messages from systemd that it was waiting for all my LVM partitions, and then finally that:
    'A start job is running for udev Wait for Complete Device Initialization'
    This has never happened before and I can't find any information about it in dmesg.
    Here is my fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # UUID=f9f12b36-2333-4c46-949a-0bd86e1ab254
    /dev/mapper/Linux-Arch / ext4 rw,relatime,data=ordered 0 1
    # UUID=21ee7aa4-234e-463d-af2a-6c4cb3551ea8
    /dev/mapper/Linux-Home /home ext4 rw,relatime,data=ordered 0 2
    # UUID=E421-470F LABEL=SYSTEM_DRV
    /dev/sda2 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    # UUID=11bf5a3f-86a5-48b7-93da-994e39463f0d
    /dev/mapper/Linux-Swap none swap defaults 0 0
    # Windows
    # /dev/sda5 /mnt/Windows ntfs-3g defaults,ro,noauto 0 0
    I've been digging around for a few weeks and I can't find anything and my boot time is really slow.
    systemd-analyze blame:
    1min 1.644s systemd-udev-settle.service
    10.079s systemd-udev-trigger.service
    9.999s systemd-remount-fs.service
    1.003s lvm2-pvscan@8:8.service
    795ms systemd-timesyncd.service
    700ms systemd-update-utmp.service
    583ms systemd-sysctl.service
    560ms rtkit-daemon.service
    469ms udisks2.service
    449ms NetworkManager.service
    438ms kmod-static-nodes.service
    363ms systemd-vconsole-setup.service
    214ms tmp.mount
    184ms sys-kernel-debug.mount
    144ms sys-kernel-config.mount
    123ms systemd-tmpfiles-clean.service
    116ms dev-mqueue.mount
    90ms [email protected]
    85ms systemd-logind.service
    82ms dev-hugepages.mount
    79ms bluetooth.service
    57ms [email protected]
    42ms polkit.service
    31ms accounts-daemon.service
    31ms wpa_supplicant.service
    24ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    20ms colord.service
    20ms gdm.service
    20ms upower.service
    19ms [email protected]
    18ms [email protected]
    17ms [email protected]
    15ms boot.mount
    12ms systemd-tmpfiles-setup-dev.service
    8ms dev-mapper-Linux\x2dSwap.swap
    8ms systemd-tmpfiles-setup.service
    8ms systemd-journal-flush.service
    5ms home.mount
    5ms systemd-user-sessions.service
    4ms systemd-backlight@backlight:intel_backlight.service
    3ms systemd-random-seed.service
    2ms systemd-udevd.service
    1ms sys-fs-fuse-connections.mount
    EDIT 2: Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c4daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0xc3217018-0xc3227057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c3217017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3217018-0x00000000c3227057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c3227058-0x00000000c4daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000c4db0000-0x00000000c61affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000c61b0000-0x00000000ca7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ca7bf000-0x00000000caebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000caebf000-0x00000000cafbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000cafbf000-0x00000000caffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed98000-0x00000000fed9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffcc0000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcaebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f62000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f62000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fba4000) (1019MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fba4000-0x0000000080000000) (4MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x00000000c31c0000) (1073MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000c31c0000-0x00000000c31e0000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000c31e0000-0x00000000c3217000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x00000000c3217000-0x00000000c3228000) (0MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x00000000c3228000-0x00000000c418a000) (15MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000c418a000-0x00000000c4db0000) (12MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x00000000c4db0000-0x00000000c61b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c61b0000-0x00000000c61b8000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c61b8000-0x00000000c61bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c61bb000-0x00000000c61bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c61bc000-0x00000000c61bf000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c61bf000-0x00000000c63a8000) (1MB)
    [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000c63a8000-0x00000000c63bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c63bf000-0x00000000c76e6000) (19MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000c76e6000-0x00000000c864a000) (15MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c864a000-0x00000000c864c000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000c864c000-0x00000000c864e000) (0MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c864e000-0x00000000c8650000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000c8650000-0x00000000c8697000) (0MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c8697000-0x00000000c8699000) (0MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000c8699000-0x00000000c86cb000) (0MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c86cb000-0x00000000c86cc000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c86cc000-0x00000000c87ff000) (1MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c87ff000-0x00000000c8803000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c8803000-0x00000000c8806000) (0MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c8806000-0x00000000c8807000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c8807000-0x00000000c885a000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c885a000-0x00000000c8882000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c8882000-0x00000000c88b0000) (0MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c88b0000-0x00000000c88b1000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c88b1000-0x00000000c8c65000) (3MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c8c65000-0x00000000c8c67000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c8c67000-0x00000000c8c78000) (0MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c8c78000-0x00000000c8c7a000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c8c7a000-0x00000000ca3bf000) (23MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000ca3bf000-0x00000000ca435000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000ca435000-0x00000000ca7bf000) (3MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000ca7bf000-0x00000000ca865000) (0MB)
    [ 0.000000] efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000ca865000-0x00000000ca866000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000ca866000-0x00000000ca868000) (0MB)
    [ 0.000000] efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ca868000-0x00000000ca869000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000ca869000-0x00000000ca86f000) (0MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x00000000ca86f000-0x00000000ca870000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000ca870000-0x00000000ca883000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x00000000ca883000-0x00000000ca884000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca884000-0x00000000ca894000) (0MB)
    [ 0.000000] efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ca894000-0x00000000ca895000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca895000-0x00000000ca8a9000) (0MB)
    [ 0.000000] efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000ca8a9000-0x00000000ca8aa000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca8aa000-0x00000000ca8e3000) (0MB)
    [ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000ca8e3000-0x00000000ca935000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca935000-0x00000000ca9bf000) (0MB)
    [ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x00000000ca9bf000-0x00000000caabf000) (1MB)
    [ 0.000000] efi: mem67: type=0, attr=0xf, range=[0x00000000caabf000-0x00000000caebf000) (4MB)
    [ 0.000000] efi: mem68: type=10, attr=0xf, range=[0x00000000caebf000-0x00000000cafbf000) (1MB)
    [ 0.000000] efi: mem69: type=9, attr=0xf, range=[0x00000000cafbf000-0x00000000cafff000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000100000000-0x000000022f600000) (4854MB)
    [ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x00000000cb000000-0x00000000cfa00000) (74MB)
    [ 0.000000] efi: mem74: type=11, attr=0x8000000000000001, range=[0x00000000f0000000-0x00000000f4000000) (64MB)
    [ 0.000000] efi: mem75: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem76: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem77: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem78: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem79: type=0, attr=0x0, range=[0x00000000fed98000-0x00000000feda0000) (0MB)
    [ 0.000000] efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem81: type=11, attr=0x8000000000000000, range=[0x00000000ffcc0000-0x0000000100000000) (3MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20175/INVALID, BIOS 66CN54WW 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 3 base 0C8000000 mask FFE000000 write-back
    [ 0.000000] 4 base 0CA000000 mask FFF000000 write-back
    [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc4daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc4bfffff] page 2M
    [ 0.000000] [mem 0xc4c00000-0xc4daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] [mem 0xc61b0000-0xc61fffff] page 4k
    [ 0.000000] [mem 0xc6200000-0xca5fffff] page 2M
    [ 0.000000] [mem 0xca600000-0xca7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fba4000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000caffe014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000caffe210 0000DC (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 00000000caff5000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 00000000cafe9000 008814 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 00000000cafbb000 000040
    [ 0.000000] ACPI: SLIC 00000000caffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 00000000caffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffb000 000662 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caffa000 000A39 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff9000 000098 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff8000 000058 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000caff7000 000757 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 00000000caff6000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 00000000caff4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 00000000caff3000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 00000000caff2000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 00000000cafe8000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafe6000 001068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 00000000cafe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 00000000cafe2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 00000000cafe1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 00000000cafdf000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 00000000cafde000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdd000 0009AA (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 00000000cafdc000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DMAR 00000000cafdb000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 00000000cafda000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f1000-0x22f5f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc4daffff]
    [ 0.000000] node 0: [mem 0xc61b0000-0xca7befff]
    [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2066246
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12807 pages used for memmap
    [ 0.000000] DMA32 zone: 819647 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3217000-0xc3217fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3227000-0xc3227fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4db0000-0xc61affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca7bf000-0xcaebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaebf000-0xcafbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcafbf000-0xcaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed98000-0xfed9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcbffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffcc0000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86656 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2033937
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=/dev/mapper/Linux-Arch rw resume=/dev/mapper/Linux-Swap pcie_aspm=force i915.i915_enable_rc6=1
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7988560K/8264984K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 276424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.263 MHz processor
    [ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.52 BogoMIPS (lpj=24942630)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20131218
    [ 0.008110] ACPI: All ACPI Tables successfully acquired
    [ 0.034617] Security Framework initialized
    [ 0.034625] Yama: becoming mindful.
    [ 0.035238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.037855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.039006] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039017] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.039253] Initializing cgroup subsys memory
    [ 0.039259] Initializing cgroup subsys devices
    [ 0.039260] Initializing cgroup subsys freezer
    [ 0.039262] Initializing cgroup subsys net_cls
    [ 0.039264] Initializing cgroup subsys blkio
    [ 0.039291] CPU: Physical Processor ID: 0
    [ 0.039293] CPU: Processor Core ID: 0
    [ 0.039298] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.039769] mce: CPU supports 7 MCE banks
    [ 0.039782] CPU0: Thermal monitoring enabled (TM1)
    [ 0.039792] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.039910] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    [ 0.043468] ftrace: allocating 20111 entries in 79 pages
    [ 0.054896] dmar: Host address width 36
    [ 0.054899] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.054906] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.054908] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.054912] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.054914] dmar: RMRR base: 0x000000cae8c000 end: 0x000000caeabfff
    [ 0.054915] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
    [ 0.054992] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.054994] HPET id 0 under DRHD base 0xfed91000
    [ 0.054995] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.055169] Enabled IRQ remapping in x2apic mode
    [ 0.055170] Enabling x2apic
    [ 0.055172] Enabled x2apic
    [ 0.055180] Switched APIC routing to cluster x2apic.
    [ 0.055649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.155770] smpboot: CPU0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.155781] TSC deadline timer enabled
    [ 0.155793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.155800] ... version: 3
    [ 0.155802] ... bit width: 48
    [ 0.155803] ... generic registers: 4
    [ 0.155804] ... value mask: 0000ffffffffffff
    [ 0.155805] ... max period: 0000ffffffffffff
    [ 0.155806] ... fixed-purpose events: 3
    [ 0.155807] ... event mask: 000000070000000f
    [ 0.157083] x86: Booting SMP configuration:
    [ 0.157086] .... node #0, CPUs: #1 #2 #3
    [ 0.198397] x86: Booted up 1 node, 4 CPUs
    [ 0.198401] smpboot: Total of 4 processors activated (19954.10 BogoMIPS)
    [ 0.202933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.203185] devtmpfs: initialized
    [ 0.206444] PM: Registering ACPI NVS region [mem 0xcaebf000-0xcafbefff] (1048576 bytes)
    [ 0.207361] pinctrl core: initialized pinctrl subsystem
    [ 0.207403] RTC time: 18:04:53, date: 11/03/14
    [ 0.207440] NET: Registered protocol family 16
    [ 0.207534] cpuidle: using governor ladder
    [ 0.207535] cpuidle: using governor menu
    [ 0.207568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.207570] ACPI: bus type PCI registered
    [ 0.207572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.207648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.207651] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.207745] PCI: Using configuration type 1 for base access
    [ 0.208531] bio: create slab <bio-0> at 0
    [ 0.208645] ACPI: Added _OSI(Module Device)
    [ 0.208647] ACPI: Added _OSI(Processor Device)
    [ 0.208648] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.208649] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.211733] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.236410] ACPI: SSDT 00000000cae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.236803] ACPI: Dynamic OEM Table Load:
    [ 0.236805] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.266214] ACPI: SSDT 00000000cae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.266634] ACPI: Dynamic OEM Table Load:
    [ 0.266636] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.296118] ACPI: SSDT 00000000cae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.296501] ACPI: Dynamic OEM Table Load:
    [ 0.296503] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.773800] ACPI: Interpreter enabled
    [ 0.773808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [ 0.773813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [ 0.773829] ACPI: (supports S0 S3 S4 S5)
    [ 0.773831] ACPI: Using IOAPIC for interrupt routing
    [ 0.773864] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.774030] ACPI: No dock devices found.
    [ 0.780437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.780443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.780579] \_SB_.PCI0:_OSC invalid UUID
    [ 0.780581] _OSC request data:1 1f 0
    [ 0.780585] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.781130] PCI host bridge to bus 0000:00
    [ 0.781133] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.781136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.781137] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.781139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.781141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.781143] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.781145] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.781147] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.781148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.781150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.781152] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.781154] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.781156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.781157] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.781159] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.781161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.781163] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.781171] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.781277] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.781291] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.781299] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.781305] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
    [ 0.781403] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.781415] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.781541] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.781567] pci 0000:00:14.0: reg 0x10: [mem 0xe0400000-0xe040ffff 64bit]
    [ 0.781646] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.781694] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.781745] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.781772] pci 0000:00:16.0: reg 0x10: [mem 0xe041c000-0xe041c00f 64bit]
    [ 0.781856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.781955] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.781980] pci 0000:00:1a.0: reg 0x10: [mem 0xe0421000-0xe04213ff]
    [ 0.782080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.782144] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.782193] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.782212] pci 0000:00:1b.0: reg 0x10: [mem 0xe0418000-0xe041bfff 64bit]
    [ 0.782296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.782345] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.782396] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.782420] pci 0000:00:1d.0: reg 0x10: [mem 0xe0420000-0xe04203ff]
    [ 0.782520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.782583] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.782634] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
    [ 0.782828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.782850] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
    [ 0.782859] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
    [ 0.782869] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
    [ 0.782877] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
    [ 0.782887] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
    [ 0.782897] pci 0000:00:1f.2: reg 0x24: [mem 0xe041f000-0xe041f7ff]
    [ 0.782948] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.783031] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.783050] pci 0000:00:1f.3: reg 0x10: [mem 0xe041d000-0xe041d0ff 64bit]
    [ 0.783074] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
    [ 0.783173] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.783198] pci 0000:00:1f.6: reg 0x10: [mem 0xe041e000-0xe041efff 64bit]
    [ 0.783553] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783614] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783672] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783790] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783908] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.783966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.784076] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.784121] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.784209] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.784212] vgaarb: loaded
    [ 0.784213] vgaarb: bridge control possible 0000:00:02.0
    [ 0.784333] PCI: Using ACPI for IRQ routing
    [ 0.786165] PCI: pci_cache_line_size set to 64 bytes
    [ 0.786172] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.786212] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.786214] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.786216] e820: reserve RAM buffer [mem 0xc3217018-0xc3ffffff]
    [ 0.786217] e820: reserve RAM buffer [mem 0xc4db0000-0xc7ffffff]
    [ 0.786219] e820: reserve RAM buffer [mem 0xca7bf000-0xcbffffff]
    [ 0.786221] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.786222] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.786315] NetLabel: Initializing
    [ 0.786317] NetLabel: domain hash size = 128
    [ 0.786318] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.786331] NetLabel: unlabeled traffic allowed by default
    [ 0.786356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.786361] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.788395] Switched to clocksource hpet
    [ 0.793449] pnp: PnP ACPI init
    [ 0.793466] ACPI: bus type PNP registered
    [ 0.793581] pnp 00:00: [dma 4]
    [ 0.793609] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.793633] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.793732] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.793773] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.793820] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.793822] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.793824] system 00:04: [io 0xffff] has been reserved
    [ 0.793826] system 00:04: [io 0xffff] has been reserved
    [ 0.793829] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.793831] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.793833] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.793835] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.793838] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.793870] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.793919] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.793922] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.793963] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.794001] pnp 00:08: Plug and Play ACPI device, IDs SYN2b01 SYN2b00 SYN0002 PNP0f13 (active)
    [ 0.794134] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.794137] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.794139] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.794141] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.794143] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.794145] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.794148] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.794150] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.794152] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.794154] system 00:09: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.794157] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.794451] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.794453] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.794456] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.794473] pnp: PnP ACPI: found 11 devices
    [ 0.794475] ACPI: bus type PNP unregistered
    [ 0.801229] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfa08000-0xcfa0ffff 64bit]
    [ 0.801237] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.801239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.801241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.801243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.801245] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.801247] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.801249] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.801251] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.801253] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.801254] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.801256] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.801258] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.801260] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.801262] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.801264] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.801266] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfeafffff]
    [ 0.801299] NET: Registered protocol family 2
    [ 0.801504] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.801681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.801864] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.801881] TCP: reno registered
    [ 0.801894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.801927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.802001] NET: Registered protocol family 1
    [ 0.802012] pci 0000:00:02.0: Boot video device
    [ 0.838581] PCI: CLS 64 bytes, default 64
    [ 0.838623] Unpacking initramfs...
    [ 0.931743] Freeing initrd memory: 4464K (ffff88007fba4000 - ffff880080000000)
    [ 0.931755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.931757] software IO TLB [mem 0xbf1c0000-0xc31c0000] (64MB) mapped at [ffff8800bf1c0000-ffff8800c31bffff]
    [ 0.931789] Simple Boot Flag at 0x44 set to 0x1
    [ 0.932025] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932033] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932042] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932051] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 0.932111] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.932127] Scanning for low memory corruption every 60 seconds
    [ 0.932408] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.948267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.949675] zbud: loaded
    [ 0.949848] VFS: Disk quotas dquot_6.5.2
    [ 0.949897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.950024] msgmni has been set to 15732
    [ 0.950080] Key type big_key registered
    [ 0.950224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.950262] io scheduler noop registered
    [ 0.950265] io scheduler deadline registered (default)
    [ 0.950296] io scheduler cfq registered
    [ 0.950355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.950370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.950401] efifb: probing for efifb
    [ 0.950423] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 5628k, total 5625k
    [ 0.950425] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.950426] efifb: scrolling: redraw
    [ 0.950428] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.955222] Console: switching to colour frame buffer device 200x56
    [ 0.959939] fb0: EFI VGA frame buffer device
    [ 0.959947] intel_idle: MWAIT substates: 0x21120
    [ 0.959948] intel_idle: v0.4 model 0x3A
    [ 0.959949] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.960140] GHES: HEST is not enabled!
    [ 0.960192] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.960674] Linux agpgart interface v0.103
    [ 0.960719] rtc_cmos 00:05: RTC can wake from S4
    [ 0.960854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.960891] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.960901] Intel P-state driver initializing.
    [ 0.960913] Intel pstate controlling: cpu 0
    [ 0.960933] Intel pstate controlling: cpu 1
    [ 0.960948] Intel pstate controlling: cpu 2
    [ 0.960965] Intel pstate controlling: cpu 3
    [ 0.960993] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.961133] TCP: cubic registered
    [ 0.961239] NET: Registered protocol family 10
    [ 0.961427] NET: Registered protocol family 17
    [ 0.961965] registered taskstats version 1
    [ 0.962642] Magic number: 6:677:88
    [ 0.962705] acpi INT3F0D:00: hash matches
    [ 0.962828] rtc_cmos 00:05: setting system clock to 2014-11-03 18:04:54 UTC (1415037894)
    [ 0.963002] PM: Checking hibernation image partition /dev/mapper/Linux-Swap
    [ 0.963010] PM: Hibernation image not present or could not be loaded.
    [ 0.964972] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
    [ 0.964975] Write protecting the kernel read-only data: 8192k
    [ 0.970240] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
    [ 0.971926] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
    [ 0.980028] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.981987] systemd-udevd[57]: starting version 216
    [ 0.993396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.999168] ACPI: bus type USB registered
    [ 0.999188] usbcore: registered new interface driver usbfs
    [ 0.999195] usbcore: registered new interface driver hub
    [ 0.999618] SCSI subsystem initialized
    [ 0.999671] usbcore: registered new device driver usb
    [ 1.000171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.000324] ehci-pci: EHCI PCI platform driver
    [ 1.000472] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.000479] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.000498] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.001114] libata version 3.00 loaded.
    [ 1.004412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.004425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0421000
    [ 1.005570] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.005576] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.018706] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.018976] hub 1-0:1.0: USB hub found
    [ 1.018989] hub 1-0:1.0: 2 ports detected
    [ 1.019277] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.019281] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.019293] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.023202] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.023218] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0420000
    [ 1.028001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.038738] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.039375] hub 2-0:1.0: USB hub found
    [ 1.039401] hub 2-0:1.0: 2 ports detected
    [ 1.039970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.039984] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.040112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.040137] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 1.040384] hub 3-0:1.0: USB hub found
    [ 1.040404] hub 3-0:1.0: 4 ports detected
    [ 1.040970] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.040975] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.041377] hub 4-0:1.0: USB hub found
    [ 1.041406] hub 4-0:1.0: 4 ports detected
    [ 1.041933] ahci 0000:00:1f.2: version 3.0
    [ 1.042141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.042189] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
    [ 1.042192] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.042951] scsi0 : ahci
    [ 1.043089] scsi1 : ahci
    [ 1.043205] scsi2 : ahci
    [ 1.043321] scsi3 : ahci
    [ 1.043443] scsi4 : ahci
    [ 1.043605] scsi5 : ahci
    [ 1.043699] ata1: SATA max UDMA/133 abar m2048@0xe041f000 port 0xe041f100 irq 43
    [ 1.043704] ata2: DUMMY
    [ 1.043707] ata3: DUMMY
    [ 1.043709] ata4: DUMMY
    [ 1.043711] ata5: DUMMY
    [ 1.043713] ata6: DUMMY
    [ 1.339195] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.389168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.390125] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390134] ata1.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT42L0Q, max UDMA/133
    [ 1.390139] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.390821] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 1.390986] ata1.00: configured for UDMA/133
    [ 1.391372] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
    [ 1.401296] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.401579] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.401588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.401790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.404906] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    [ 1.406850] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.490272] hub 1-1:1.0: USB hub found
    [ 1.490465] hub 1-1:1.0: 6 ports detected
    [ 1.512747] device-mapper: uevent: version 1.0.3
    [ 1.512926] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.519284] bio: create slab <bio-1> at 1
    [ 1.545404] PM: Starting manual resume from disk
    [ 1.545409] PM: Hibernation image partition 254:0 present
    [ 1.545411] PM: Looking for hibernation image.
    [ 1.545576] PM: Image not found (code -22)
    [ 1.545578] PM: Hibernation image not present or could not be loaded.
    [ 1.579429] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.579432] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.583409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.584558] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
    [ 1.584561] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
    [ 1.609376] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.665486] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
    [ 1.665742] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
    [ 1.665813] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
    [ 1.665853] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
    [ 1.665880] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
    [ 1.665906] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
    [ 1.665932] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
    [ 1.665987] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 1.666093] systemd[1]: Detected architecture 'x86-64'.
    [ 1.667499] systemd[1]: Set hostname to <arch-yogi>.
    [ 1.668059] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd.
    [ 1.668094] systemd[1]: Installed release agent.
    [ 1.668133] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
    [ 1.669521] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 147.
    [ 1.669581] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-gpt-auto-generator as 148.
    [ 1.669637] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 149.
    [ 1.669689] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 150.
    [ 1.669743] systemd[146]: Spawned /usr/lib/systemd/system-generators/lvm2-activation-generator as 151.
    [ 1.669826] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-efi-boot-generator as 152.
    [ 1.669899] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-debug-generator as 153.
    [ 1.669992] systemd[146]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 154.
    [ 1.671020] systemd[146]: /usr/lib/systemd/system-generators/systemd-getty-generator succeeded.
    [ 1.677317] systemd[146]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator succeeded.
    [ 1.678493] systemd[146]: /usr/lib/systemd/system-generators/systemd-fstab-generator succeeded.
    [ 1.678499] systemd[146]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
    [ 1.689210] systemd[146]: /usr/lib/systemd/system-generators/lvm2-activation-generator succeeded.
    [ 1.689216] systemd[146]: /usr/lib/systemd/system-generators/systemd-efi-boot-generator succeeded.
    [ 1.689220] systemd[146]: /usr/lib/systemd/system-generators/systemd-debug-generator succeeded.
    [ 1.689223] systemd[146]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator succeeded.
    [ 1.689278] systemd[1]: /usr/lib/systemd/system-generators succeeded.
    [ 1.689509] systemd[1]: Looking for unit files in (higher priority first):
    [ 1.689512] systemd[1]: /etc/systemd/system
    [ 1.689513] systemd[1]: /run/systemd/system
    [ 1.689514] systemd[1]: /run/systemd/generator
    [ 1.689516] systemd[1]: /usr/local/lib/systemd/system
    [ 1.689517] systemd[1]: /usr/lib/systemd/system
    [ 1.689518] systemd[1]: /run/systemd/generator.late
    [ 1.689520] systemd[1]: SysV init scripts and rcN.d links support disabled
    [ 1.696010] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
    [ 1.699470] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
    [ 1.704745] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
    [ 1.711661] systemd[1]: Failed to load configuration for plymouth-quit.service: No such file or directory
    [ 1.712238] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
    [ 1.720811] systemd[1]: Using notification socket /run/systemd/notify
    [ 1.720824] systemd[1]: Successfully created private D-Bus server.
    [ 1.720829] systemd[1]: -.mount changed dead -> mounted
    [ 1.720856] systemd[1]: Activating default unit: default.target
    [ 1.720860] systemd[1]: Trying to enqueue job graphical.target/start/isolate
    [ 1.720991] systemd[1]: Looking at job [email protected]/stop conflicted_by=yes
    [ 1.720993] systemd[1]: Looking at job [email protected]/start conflicted_by=no
    [ 1.720996] systemd[1]: Fixing conflicting jobs [email protected]/stop,[email protected]/start by deleting job [email protected]/start
    [ 1.720998] systemd[1]: Looking at job gdm.service/start conflicted_by=no
    [ 1.721000] systemd[1]: Looking at job gdm.service/stop conflicted_by=no
    [ 1.721002] systemd[1]: Fixing conflicting jobs gdm.service/start,gdm.service/stop by deleting job gdm.service/stop
    [ 1.721036] systemd[1]: Installed new job graphical.target/start as 1
    [ 1.721044] systemd[1]: Installed new job multi-user.target/start as 2
    [ 1.721048] systemd[1]: Installed new job basic.target/start as 3
    [ 1.721052] systemd[1]: Installed new job sysinit.target/start as 4
    [ 1.721056] systemd[1]: Installed new job local-fs.target/start as 5
    [ 1.721059] systemd[1]: Installed new job boot.mount/start as 6
    [ 1.721063] systemd[1]: Installed new job system.slice/start as 8
    [ 1.721067] systemd[1]: Installed new job -.slice/start as 9
    [ 1.721070] systemd[1]: Installed new job dev-sda2.device/start as 10
    [ 1.721077] systemd[1]: Installed new job [email protected]/start as 11
    [ 1.721082] systemd[1]: Installed new job system-systemd\x2dfsck.slice/start as 12
    [ 1.721085] systemd[1]: Installed new job home.mount/start as 15
    [ 1.721089] systemd[1]: Installed new job dev-mapper-Linux\x2dHome.device/start as 16
    [ 1.721093] systemd[1]: Installed new job systemd-fsck@dev-mapper-Linux\x2dHome.service/start as 17
    [ 1.721097] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
    [ 1.721100] systemd[1]: Installed new job tmp.mount/start as 19
    [ 1.721104] systemd[1]: Installed new job systemd-remount-fs.service/start as 20
    [ 1.721107] systemd[1]: Installed new job local-fs-pre.target/start as 21
    [ 1.721110] systemd[1]: Installed new job boot.automount/start as 22
    [ 1.721114] systemd[1]: Installed new job swap.target/start as 23
    [ 1.721117] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.swap/start as 24
    [ 1.721121] systemd[1]: Installed new job dev-mapper-Linux\x2dSwap.device/start as 25
    [ 1.721124] systemd[1]: Installed new job systemd-timesyncd.service/start as 26
    [ 1.721127] systemd[1]: Installed new job time-sync.target/start as 27
    [ 1.721131] systemd[1]: Installed new job ldconfig.service/start as 28
    [ 1.721134] systemd[1]: Installed new job sys-kernel-debug.mount/start as 29
    [ 1.721137] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 30
    [ 1.721140] systemd[1]: Installed new job sys-kernel-config.mount/start as 31
    [ 1.721144] systemd[1]: Installed new job systemd-journal-flush.service/start as 32
    [ 1.721147] systemd[1]: Installed new job systemd-journald.service/start as 33
    [ 1.721150] systemd[1]: Installed new job systemd-journald.socket/start as 34
    [ 1.721154] systemd[1]: Installed new job systemd-journald-dev-log.socket/start as 35
    [ 1.721157] systemd[1]: Installed new job systemd-sysctl.service/start as 36
    [ 1.721160] systemd[1]: Installed new job systemd-firstboot.service/start as 37
    [ 1.721164] systemd[1]: Installed new job cryptsetup.target/start as 38
    [ 1.721167] systemd[1]: Installed new job lvm2-lvmetad.socket/start as 39
    [ 1.721170] systemd[1]: Installed new job kmod-static-nodes.service/start as 40
    [ 1.721173] systemd[1]: Installed new job systemd-binfmt.service/start as 41
    [ 1.721177] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 42
    [ 1.721180] systemd[1]: Installed new job systemd-journal-catalog-update.service/start as 43
    [ 1.721184] systemd[1]: Installed new job systemd-udevd.service/start as 44
    [ 1.721187] systemd[1]: Installed new job systemd-udevd-control.socket/start as 45
    [ 1.721191] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 46
    [ 1.721194] systemd[1]: Installed new job systemd-ask-password-console.path/start as 47
    [ 1.721197] systemd[1]: Installed new job systemd-random-seed.service/start as 48
    [ 1.721200] systemd[1]: Installed new job dev-mqueue.mount/start as 49
    [ 1.721204] systemd[1]: Installed new job systemd-modules-load.service/start as 50
    [ 1.721207] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 51
    [ 1.721211] systemd[1]: Installed new job systemd-tmpfiles-setup-dev.service/start as 52
    [ 1.721214] systemd[1]: Installed new job systemd-udev-trigger.service/start as 53
    [ 1.721217] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 54
    [ 1.721220] systemd[1]: Installed new job systemd-update-utmp.service/start as 55
    [ 1.721224] systemd[1]: Installed new job dev-hugepages.mount/start as 56
    [ 1.721227] systemd[1]: Installed new job systemd-sysusers.service/start as 57
    [ 1.721230] systemd[1]: Installed new job systemd-udev-hwdb-update.service/start as 58
    [ 1.721233] systemd[1]: Installed new job systemd-update-done.service/start as 59
    [ 1.721237] systemd[1]: Installed new job sockets.target/start as 62
    [ 1.721240] systemd[1]: Installed new job acpid.socket/start as 63
    [ 1.721244] systemd[1]: Installed new job systemd-shutdownd.socket/start as 64
    [ 1.721247] systemd[1]: Installed new job dm-event.socket/start as 65
    [ 1.721250] systemd[1]: Installed new job systemd-initctl.socket/start as 66
    [ 1.721254] systemd[1]: Installed new job dbus.socket/start as 67
    [ 1.721257] systemd[1]: Installed new job timers.target/start as 68
    [ 1.721260] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 69
    [ 1.721263] systemd[1]: Installed new job paths.target/start as 70
    [ 1.721267] systemd[1]: Installed new job slices.target/start as 71
    [ 1.721270] systemd[1]: Installed new job acpid.service/start as 72
    [ 1.721272] systemd[1]: Installed new job systemd-udev-settle.service/start as 73
    [ 1.721276] systemd[1]: Installed new job remote-fs.target/start as 74
    [ 1.721279] systemd[1]: Installed new job NetworkManager.service/start as 75
    [ 1.721282] systemd[1]: Installed new job network.target/start as 76
    [ 1.721286] systemd[1]: Installed new job man-db.timer/start as 77
    [ 1.721289] systemd[1]: Installed new job dbus.service/start as 78
    [ 1.721292] systemd[1]: Installed new job getty.target/start as 79
    [ 1.721295] systemd[1]: Installed new job system-getty.slice/start as 81
    [ 1.721299] systemd[1]: Installed new job gdm.service

    So it times out (taking 3 minutes) then says
    [FAILED] Failed to start udev Wait for Complete Device Initialization.
    See "systemctl status systemd-udev-settle.service" for details
    [DEPEND] Dependency failed for ACPI event daemon
    so I ran
    systemctl status systemd-udev-settle
    with this output:
    ● systemd-udev-settle.service - udev Wait for Complete Device Initialization
    Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static)
    Active: active (exited) since Thu 2014-11-13 11:40:16 EST; 1min 24s ago
    Docs: man:udev(7)
    man:systemd-udevd.service(8)
    Process: 583 ExecStart=/usr/bin/udevadm settle (code=exited, status=0/SUCCESS)
    Main PID: 583 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/systemd-udev-settle.service
    Nov 13 11:40:14 arch-yogi systemd[1]: systemd-udev-settle.service changed failed -> start
    Nov 13 11:40:16 arch-yogi systemd[1]: Child 583 belongs to systemd-udev-settle.service
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=0/SUCCESS
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service changed start -> exited
    Nov 13 11:40:16 arch-yogi systemd[1]: Job systemd-udev-settle.service/start finished, result=done
    Nov 13 11:40:16 arch-yogi systemd[1]: Started udev Wait for Complete Device Initialization.
    Nov 13 11:40:16 arch-yogi systemd[1]: systemd-udev-settle.service: cgroup is empty
    and after another
    systemd-analyze blame
    I get:
    2.358s systemd-udev-settle.service
    995ms lvm2-pvscan@8:8.service
    558ms rtkit-daemon.service
    488ms NetworkManager.service
    458ms udisks2.service
    341ms systemd-udev-trigger.service
    341ms systemd-binfmt.service
    319ms systemd-tmpfiles-setup-dev.service
    315ms systemd-random-seed.service
    301ms systemd-journald.service
    299ms proc-sys-fs-binfmt_misc.mount
    166ms systemd-udevd.service
    133ms [email protected]
    108ms systemd-journal-flush.service
    98ms systemd-logind.service
    90ms systemd-timesyncd.service
    80ms bluetooth.service
    65ms [email protected]
    47ms polkit.service
    37ms accounts-daemon.service
    28ms wpa_supplicant.service
    26ms systemd-sysctl.service
    25ms colord.service
    23ms systemd-fsck@dev-mapper-Linux\x2dHome.service
    23ms [email protected]
    22ms [email protected]
    21ms [email protected]
    19ms boot.mount
    18ms upower.service
    17ms avahi-daemon.service
    14ms systemd-remount-fs.service
    13ms gdm.service
    11ms tmp.mount
    11ms systemd-vconsole-setup.service
    10ms sys-kernel-debug.mount
    9ms dev-mapper-Linux\x2dSwap.swap
    8ms kmod-static-nodes.service
    6ms systemd-tmpfiles-setup.service
    5ms systemd-user-sessions.service
    5ms dev-mqueue.mount
    4ms systemd-update-utmp.service
    3ms home.mount
    3ms sys-kernel-config.mount
    3ms sys-fs-fuse-connections.mount
    3ms systemd-backlight@backlight:intel_backlight.service
    2ms dev-hugepages.mount
    systemd-analyze gets it right though:
    Startup finished in 2.538s (firmware) + 62ms (loader) + 2.238s (kernel) + 3min 3.161s (userspace) = 3min 8.001s
    What can I do?

  • Macbook Pro 15inch Early 2011 very long boot time, Macbook Pro 15inch Early 2011 very long boot time

    I have the macbook pro early 2011 15inch. i7 processor, 500gb hard drive, and 4gb ram and have Moutain lion installed. The computer takes a good minute to boot to the login screen and then probably another 30 - 45 seconds to actually login and be able to do stuff on the desktop.
    The comptuer has plenty of hard drive space, about 370gb. I dont think it should be taking this long for my comptuer to boot up. What can I do to make this boot time faster? (I am currently looking to get an ssd but that wont be for a while untill i get the money) So what can I do in the meantime to help it boot faster?

    First go to Disk Utility and verify disk and repair if needed then repair permissions. Do you have any antivirus installed? Then go through all of your apps and check to make sure they are compatible using www.roaringapps.com. I guarantee it is an incompatible app or antivirus causing the issue. Also, look at Thomas A Reeds, Understanding Upgrade Nightmares article, http://www.reedcorner.net/understanding-upgrade-nightmares/

  • Loading application at the boot time

    Hi all!
    Maybe somebody can answer my question:
    How can I run my application at the boot time?
    Thanks

    We also have similar requirements. We are starting our script (which starts lot of processes) through inittab with options set to "once". We want this script to be executed only once in run level "3". But we noticed that the script is executed every time system moves into state "3".
    Is there any way by which we can execute the process only during boot time and not otherwise?
    Thank you for help
    Dhananjay Joshi

  • Modules at boot time?

    CPQARRAY ...
    I am running a compaq server that needs this to boot.  It is not included in the 2.6 kernel (arch 0.6) and I am not sure if I can load it as a module during boot.
    Thanks...
    MJB

    I know it can be built and it already is a module in the install...but I need to get the system up to get a kernel built to the get the module to get to the drives.....
    So...thanks.  But, can this be passed as a boot-time parameter (I am guessing no since it needs it to read the disks to read the module to read the disks to read the module ....

  • Recover /var mount-point into new boot environment

    I installed Solaris 10 u7 with zfs pool containing / mount-point (root)
    One issue to mention is that - for no compulsory reason - I asked Solaris installer to place /var mount point into different file system (an option of the installer which I did not fully understood)
    I used Live Upgrade to migrate Solaris 10 u7 to U8. First:
    lucreate -c CBE - n NBE
    I assume NBE boot environment was created in the zfs pool (rpool)
    I did not take care of /var at this time.
    I did luupgrade - to apply new Update 8 into NBE - the target boot environment.
    Then did luactivate NBE and "init 6" to reboot.
    At boot time Solaris does start NBE (Solaris 10 U8) - but cannot mount /var - hence forces console into
    Maintenance Mode.
    What is the strategy to use the /var file-system from CBE (old boot environment) ?
    Can I mount file-system of old CBE /var ?
    Or should I mount a spare file system as NBE /var and somehow copy it?
    Please enlist a series of steps (commands), thanks.

    I reinstalled Solaris 10 Update7 - this time with / (root) and /var on same dataset (file system).
    This time lucreate and "luupgrade to Update 8" and luactivate ended OK
    (no problems with mounting /var after "init 6" reboot)

  • HT2674 I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted.  File folder: "Core Services" contains a locked file: "boot.efi".  It will not

    I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive which operates from Time Machine.
    Now, the trash can will not empty some of the files deleted from the backup harddrive.
    The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi". 
    It will not delete.
    How do I get the trash can empty of these files?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Cant mount /var at boot

    I am experiencing problem with our v480 server, as ocasionally it fails to boot and gives cant mount /var error and goes into single user mode. (Log file is attached below). Once this happens, it doesnt come back into runlevel 3 until it is completely powered off and on.
    I fixed the (ufs log for / changed state to Error ) message by removing the patch 113073-14 and making / as nologging in /etc/vfstab file. But the problem with not mounting /var still comes up. I am attaching the log file below with the ufslog error message included (which doesnt show up after patch removal).
    I am looking for any suggestions or hints, what would be causing this. Thanks a lot.
    Sun Fire 480R, No Keyboard
    Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.13.0, 4096 MB memory installed, Serial ##
    Creating CPU memory layout properties.
    Initializing 1MB of memory at addr a0ffb92000 - Initializing 12MB of memory at addr a0ff002000 - Initializing 16MB of memory at addr a0fe002000 - Initializing 4064MB of memory at addr a000000000 \ | / - \ | / - Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
    Environmental monitor is ON
    Rebooting with command: boot
    Boot device: disk File and args:
    Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
    FCode UFS Reader 1.12 00/07/17 15:48:16.
    Loading: /platform/SUNW,Sun-Fire-480R/ufsboot
    Loading: /platform/sun4u/ufsboot
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ SunOS Release 5.9 Version Generic_117171-12 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <0>
    Can't find clone devinfo node
    jnic146x0: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x0: FCode: Version 3.9 [3505]
    jnic146x0: IRQ: 1 Channel: 1
    jnic146x0: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x0: WWNN: 100000017301494A WWPN: 200000017301494A
    jnic146x0: Auto-negotiating link speed
    jnic146x0: Configured as Fabric port
    jnic146x0: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x0: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x0: Link Up: 2Gig
    jnic146x0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x0: Network Port FFFC01 (WWN 100000051E341635:20FD00051E341635) available.
    WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <1>
    Can't find clone devinfo node
    jnic146x1: Hba: JNI,FCR Model: FCE-6460-N
    jnic146x1: FCode: Version 3.9 [3505]
    jnic146x1: IRQ: 1 Channel: 1
    jnic146x1: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
    jnic146x1: WWNN: 10000001730146A9 WWPN: 20000001730146A9
    jnic146x1: Auto-negotiating link speed
    jnic146x1: Configured as Fabric port
    jnic146x1: JNIC v5.2.1.HIT.M05 (03082100)
    jnic146x1: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
    jnic146x1: Link Up: 2Gig
    jnic146x1: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x1: Network Port FFFC01 (WWN 100000051E344E7D:20FD00051E344E7D) available.
    jnic146x0: Target0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
    jnic146x0: Target1: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
    jnic146x1: Target0: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
    jnic146x1: Target1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
    jnic146x0: Target0: Lun0 present.
    jnic146x1: Target0: Lun0 present.
    jnic146x0: Target0: Lun1 present.
    jnic146x1: Target0: Lun1 present.
    jnic146x0: Target0: Lun2 present.
    jnic146x1: Target0: Lun2 present.
    jnic146x0: Target0: Lun3 present.
    jnic146x1: Target0: Lun3 present.
    jnic146x0: Target0: Lun4 present.
    jnic146x1: Target0: Lun4 present.
    jnic146x0: Target1: Lun0 present.
    jnic146x1: Target1: Lun0 present.
    jnic146x0: Target1: Lun1 present.
    jnic146x1: Target1: Lun1 present.
    jnic146x0: Target1: Lun2 present.
    jnic146x1: Target1: Lun2 present.
    jnic146x0: Target1: Lun3 present.
    jnic146x1: Target1: Lun3 present.
    jnic146x0: Target1: Lun4 present.
    jnic146x1: Target1: Lun4 present.
    WARNING: Error writing ufs log state
    WARNING: ufs log for / changed state to Error
    WARNING: Please umount(1M) / and run fsck(1M)
    VxVM sysboot INFO V-5-2-3390 Starting restore daemon...
    VxVM sysboot INFO V-5-2-3409 starting in boot mode...
    NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
    NOTICE: VxVM vxdmp V-5-0-34 added disk array D6001A6B, datype = HDS9500V
    configuring IPv4 interfaces: ce0 ce1.
    Hostname: beta23
    VxVM INFO V-5-2-3247 starting special volumes ( swapvol rootvol usr var opt )...
    Configuring /dev and /devices
    Configuring the /dev directory (compatibility devices)
    mount: /dev/vx/dsk/bootdg/var is already mounted, /var is busy,
    or the allowable number of mount points has been exceeded
    mount: mount-point /var/run does not exist.
    VxVM vxvm-startup2 INFO V-5-2-503 VxVM general startup...
    Dec 13 22:09:04 vxvm:vxconfigd: V-5-1-1589 enable failed: Error in disk group configuration copies
    Dec 13 22:09:04 vxvm:vxconfigd: Database file not found; transactions are disabled.
    VxVM vxvm-startup2 ERROR V-5-2-3656 Vold is not enabled for transactions
    No volumes started
    INIT: Cannot create /var/adm/utmpx
    INIT: failed write of utmpx entry:" "
    INIT: failed write of utmpx entry:" "
    INIT: SINGLE USER MODE

    Thank you so much for your response.
    This error doesnt occur in all boots, but once it occurs , we have to power off the machine and power back on and machine boots normally into run level 3 without this /var error. otherwise a simple reboot doesnt help and we get the same error.
    Here is the /etc/vfstab file, may be you can suggest further.
    #device device mount FS fsck mount mount
    #to mount to fsck point type pass at boot options
    fd - /dev/fd fd - no -
    /proc - /proc proc - no -
    /dev/vx/dsk/bootdg/swapvol - - swap - no -
    /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no nologging
    /dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no -
    /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no -
    /dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes -
    swap - /tmp tmpfs - yes -
    #/dev/odm added for support of Oracle access to VxFS
    /dev/odm - /dev/odm odm - no -
    #NOTE: volume rootvol (/) encapsulated partition c0t0d0s0
    #NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1
    #NOTE: volume usr (/usr) encapsulated partition c0t0d0s3
    #NOTE: volume var (/var) encapsulated partition c0t0d0s4
    #NOTE: volume opt (/opt) encapsulated partition c0t0d0s5
    /dev/vx/dsk/dxdbdg/u01 /dev/vx/rdsk/dxdbdg/u01 /u01 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u02 /dev/vx/rdsk/dxdbdg/u02 /u02 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u04 /dev/vx/rdsk/dxdbdg/u04 /u04 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u05 /dev/vx/rdsk/dxdbdg/u05 /u05 vxfs - yes suid
    /dev/vx/dsk/dxdbdg/u06 /dev/vx/rdsk/dxdbdg/u06 /u06 vxfs - yes suid
    Thanks again

  • Can someone please Interpret this EtreCheck for me? Macbook Pro Boot Time Really Slow.

    Can someone please give me detailed instruction on what to do no next. I've read several forum discussion on this subject and seen various examples. i would like help with mine. Reason being is because my MBP boot up time is almost around 2-3mins long sometimes it can even be upto 5mins. reason i ask is because i know this is not normal. compared to my macbook (mid-2010) this is REALLY slow. And all the specs of my MBP should in theory make my MB a thing of the past. (Why i bought the MBP in the first place). i've done PRAM reset and booted in Safe Mode. i've removed several applications using the correct uninstalls where required.
    i have ran a terminal commands to clear the kernal caches and got these results (not sure if it will help). And neither have made a difference.
    Password:
    macs-imac:~ SantiagoXG$ sudo kextcache -system-prelinked-kernel
    kext com.paceap.kext.pacesupport.snowleopard  507029000 is in exception list, allowing to load
    kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    macs-imac:~ SantiagoXG$ sudo kextcache -system-caches
    Password:
    macs-imac:~ SantiagoXG$
    Below is the EtreCheck:
    Hardware Information:
              MacBook Pro (Retina, 15-inch, Early 2013)
              MacBook Pro - model: MacBookPro10,1
              1 2.7 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
              NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:15
    Disk Information:
              APPLE SSD SD256E disk0 : (251 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 250.01 GB (135.34 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 44
    Kernel Extensions:
              com.paceap.kext.pacesupport.snowleopard          (5.7.2)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.maintain.AutoLoginUserScreenLocked.plist 3rd-Party support link
              [System] com.maintain.CocktailScheduler.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.soma-zone.LaunchControl.Helper.plist 3rd-Party support link
              [System] PACESupport.plist 3rd-Party support link
    Launch Agents:
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.maintain.LogOut.plist 3rd-Party support link
              [System] com.maintain.Restart.plist 3rd-Party support link
              [System] com.maintain.ShutDown.plist 3rd-Party support link
              [System] com.maintain.Sleep.plist 3rd-Party support link
              [System] com.maintain.SystemEvents.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
              [not loaded] com.nero.HSMMonitor.plist 3rd-Party support link
    User Login Items:
              WDDriveUtilityHelper
              WDSecurityHelper
    Internet Plug-ins:
              DirectorShockwave: Version: 11.5.8r612 3rd-Party support link
              Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
              Flip4Mac WMV Plugin: Version: 2.3.5.4 3rd-Party support link
              OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
              OVSHelper: Version: 1.1 3rd-Party support link
              Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              QuickTime Plugin: Version: 7.7.3
              RealPlayer Plugin: Version: (null) 3rd-Party support link
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              Slick Savings: Version: 1.0
              Searchme: Version: 1.2
              Ebay Shopping Assistant: Version: 1.1
              Amazon Shopping Assistant: Version: 1.1
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              FUSE for OS X (OSXFUSE)  3rd-Party support link
              Java  3rd-Party support link
              M-AudioFastTrack  3rd-Party support link
              MacFUSE  3rd-Party support link
              NTFS-3G  3rd-Party support link
              Perian  3rd-Party support link
              Tuxera NTFS  3rd-Party support link
    Old Applications:
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Library/Application Support/DivX
                        DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                        DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                        DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
              Wondershare Helper Compact:          Version: 2.2.6.0 - SDK 10.5 3rd-Party support link
                        /Applications/Wondershare Helper compact/Wondershare Helper Compact.app
              SA Color Finesse 3 UI:          Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
                        /Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
              dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              dynamiclinkmediaserver:          Version: 6.0.1 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
              DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
              DeTune:          Version: 1.0.6 - SDK 10.5 3rd-Party support link
              DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO - Auto backup turned off
              Volumes being backed up:
              Destinations:
                        SantiagoXG [Local] (Last used)
                        Total size: 0 B
                        Total number of backups: (null)
                        Size of backup disk: Excellent
                                  Backup size 0 B > (Disk size 0 B X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          WindowServer
                   2%          EtreCheck
                   0%          WDDriveUtilityHelper
                   0%          configd
                   0%          imagent
    Top Processes by Memory:
              213 MB          Dock
              147 MB          mds_stores
              147 MB          Google Chrome
              147 MB          com.apple.IconServicesAgent
              131 MB          Google Chrome Helper
    Virtual Memory Information:
              11.91 GB          Free RAM
              2.40 GB          Active RAM
              385 MB          Inactive RAM
              1.31 GB          Wired RAM
              405 MB          Page-ins
              0 B          Page-outs

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutesafter the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

Maybe you are looking for

  • How do I get my Exchange "home" addresses to show up in Contacts?

    I synch my iPhone contacts from my work Exchange Server.  Ever since I upgraded to IOS7, I cannot see any "home" addresses for my contacts.  All I can see is "work" addresses for each contact.  All phone numbers and e-mails are fine.  It's only cause

  • Error messge when opening a form.

    Hi all I'm new to form creation, I'm using Acrobat v9 Pro.  I've created a form which works well but when opened by others they see  the folllowing error message.  The form filling option is turned on and if the user tries to complete the form when t

  • ATI Catalyst/Powerplay

    Can anybody direct me to a place that I could download a version that works for macbook pro 15" radeon x1600? I want to turn off powerplay (I game without being plugged in) and the only way I know of doing this is to go to Catalyst of ATI Control Cen

  • Email to file scenario

    Hi all We have configured the sender mail adapter to receive attachments (.txt or .csv) using the PayloadSwapBean. Our next step is to save the attachment to a file. We don't want to do any mapping, just save the file. Is it possible? How? Waiting fo

  • Lightsnake and GB on MacBook Pro

    Hey, I've just purchased Lightsnake and used to run it with the GB for a while successfully. But right now, no luck. I don't hear any sound, just noise on the background. Tried to go to Audio midi, and GB preferences, but still, no sound is coming ou