Can't move a project to external drive. Followed Apple's help instructions. Is it because I partitioned the external drive?

When I drag the project to the external drive in the event library, it does not lock on. Thus, options for Move Project or Move Project and Events don't show up.The WD external drive has been formatted correctly. It has 2 partitions, one for Time Machine, one for saving files and folders.

zarathu wrote:
You don't say if you are using iMovie 11.  The only way to move a project is to have '11. 
And then you have to save it as an Archive.  You can move the archive.  You can also save it as a disk image but that will be a completed document. 
If there is no"Archive Project"  in your file menu, you are out of luck.
The issue here is that the iMovie 11 Help files are incorrect (see below).
It is actually very simple to move a project and all its associated components to an external drive.
You have to do it however in the Project Library and not mix it with the Event Library as the help files suggest.
Type in External Drive into iMovie Help and read through the results.
Best, Z.

Similar Messages

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • Can I move idvd projects to an external hard drive?

    I need to make space on my hard drive and would like to move all the dvd projects to an external hard drive.  Can I do this without causing any problems with accessing them again?

    Yes and No
    The Yes part:
    It is possible to run an iPhoto Library with the Originals stored outside the Library folder, but I strongly caution against it - especially if the Library and the files are on different volumes, as you propose. Why? the short answer: if the files become detached from the database then you will end up reconnecting every single one, one by one. For more see this:
    https://discussions.apple.com/thread/3062728?tstart=0
    Further, if the external is not plugged in when you launch iphoto it will ask you where each file is. All of them. One by one.
    So that's really a 'Yes... but...' I suppose.
    The No part:
    You have currently got a Managed Library. There's no way to convert to a Referenced one.
    Then there's the... 'how much money do you want to throw at this' bit?
    If you purchase Aperture this is a cinch. It can relocate masters, reconnect them if they get seperated and so on. Pay more, get more options. And Aperture can use the same Library as iPhoto, but there is a bigger learngn curve.

  • I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries to an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

    I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries on an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.  Is this possible? Can I set up a RAID 5 format for redundancy?

    I'd like to store my Aperture /IMovie Libraries on an external hard drive.
    That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
    In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
    Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
    You must have backups on a different disk .. otherwise it is pointless.
    Can I set up a RAID 5 format for redundancy?
    No.. you can buy special USB and Thunderbolt external drives that support RAID..
    BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
    Raid will corrupt all copies of the files.. it is replicated across all disks.
    Delete a photo it is deleted across all disks.. you have no recovery.
    Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

  • I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

    I've just bought a new iMac with 2 TB hard drive. Can I partition the startup drive?

    Glenfern wrote:
    The reason I'm considering partitioning is - I'm going to transfer about 50 GB of family photos & music to the iMac. Over time the photos & music library is going to grow. My idea was to point the iphoto & itunes library to the new partition so that the application programs (that will will reside in partition 1), will not get congested with photos & music over time & degrade performance. Also, I dabble a little bit with the music editing program LOGIC & Sound Track Pro, which creates lots of little music files in the process.
    In your case I would strongly recommend against partitioning, as dwb mentions a drive loaded with data on an
    O SX system doesn't equate to  performance loss. However partitioning does. If you were going to tell me you were partitioning to load different OS's on the computer then you would have a good reason to think about partitioning. My suggestion is do not partition.
    What I would also recommend is getting some high quality high speed external HD's to store your photo and music libraries on. This helps keept the 2GB drive available while maintaining performance. I have 3 external HD's attached to my iMac, two are backup drives (1 Time Machine & 1 Bootable Clone) the third drive is for storing my my music, photo & movie libraries on. If you go this route the 3 drives I'd recommend are:
    http://g-technology.com/products/g-drive.cfm
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    http://www.lacie.com/us/products/product.htm?id=10330
    Personally I use the Lacie's however OWC or G-Tech would also be welcome on my desk.
    Again if you want to take this path Apple has instructions for how to move the libraries to EHDs, if you want those links let me know.

  • I have my iTunes music folder stored on an external hard drive.  I recently purchased a new Mac.  After attaching the external hard drive, all the songs imported without any problem except my Playlists.  Any clue about where they are or how to revive them

    I have my iTunes music folder stored on an external hard drive.  I recently purchases a new Mac.  After attaching the external hard drive, all songs imported without a problem except my playlists.  Any clue about where they are or how to revive them for use on my new Mac?
    Thanks!

    Rysz wrote:
    To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
    Correct.
    After that just select the new folder location in iTunes> Advanced settings.
    Incorrect.
    Hold Option and launch iTunes.
    Select Choose library and select the iTunes folder.
    This will read the iTunes library.itl file in this folder and the library as it was previously will be opened.

  • I have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    i have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    What are you using to search? You should be able to search any drive in from the Finder. If you're having trouble, try "EasyFind" from the App Store (free). You can search any volumes with it.
    Clinton

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • I can't save Logic Projects/Files since updating to Lion. Help?!

    I can't save Logic Projects/Files since updating to Lion. Help?!

    I just had the same problem, after working on a project for a couple of hours and thinking it was saved, I go back to work on it some more and all the work I had done was not there. This is totally frustrating. I posted here as well and haven't had any responses. Good luck to you.

  • Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

    Hello, I need help to retrieve deleted information to partition an external hard drive. What should I do?

    I'm not about the question, and giving you the right answer requires me to ask a few more questions.
    Do you want to retrieve deleted information for future usage, or to completely delete a partition? The latter is straightforward: simply erase the partition. The former is more complicated: it's very difficult, even using available commercial software, to recover deleted information. If the data is important, you may want to contact a professional like DriveSavers. It won't be cheap.

  • Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file hav

    Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive

    Here's the scoop, new friend.....
    When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward.

  • I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
    How to erase and install Snow Leopard 10.6
    Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
    If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

  • How to partition the hard drive in Mac OS 9?

    I  have a 366 MHz iBook Clamshell, and to install Yellow Dog Linux without wiping OS 9, I must partition the hard drive. It does not have any CD tray, and the hard drive is 10 GB.

    If you are trying to partition the disk you are booting from, then no, it cannot alter it's partition map while booted.  You will have to use some alternative boot device (ordinarily this would be a bootable CD, but you'll need to find some workaround like an external device).
    Also, the utilities in OS 9 will only repartition that drive by erasing the whole thing.  You will need to boot into a Linux OS with one of the Linux partition tools if you want to non-destructively alter that discs partition table (use something like GParted on a bootable UBuntu disc or something like that).

  • My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

    My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

    Hi,
    The simplest solution would to restore from your back up - https://discussions.apple.com/docs/DOC-4112
    If you do not have a back, you can select first track on list in song view, from menu > edit > select all. Next ctrl+click and select download from pop up. You may wish to do this in small batches as it will take some time to download.
    Jim

  • Should i partition the boot drive to maximize Logic performance?

    I'm about to receive my Mac Pro 3ghz, 8 gig RAM.
    I bought 3 x 10,000rpm raptor drives, and one Apple 250 gig drive.
    After speaking with Applecare, I've decided to RAID the 3 drives, and use them for audio and sample streaming.
    I'll use the apple drive for the OS. I decided to do this because Applecare said that the hard drive speed isn't very relevant for running the OS and applications. RAM is the main issue there. Hard disk speed comes into play when accessing and writing files. So using the RAID for samples and audio, while using the 7200rpm drive for the OS will be the optimal config.
    Soooo, that leaves me with a 250 gig drive for the OS. Obviously, that leaves me with a great deal of extra space. I'll need to back up the files on the RAID drives frequently, so i'm planning to store the backups on the OS drive.
    Should i simply save the files on the drive, or would it help Logic's performance to partition the drive, keeping the
    OS seperate from the backup files? Or would partitioning hurt Logic and general OS operations?

    In theory partioning the drive and putting the OS on the first partion will keep the OS files in the drives fastest region, even if fragmented.
    You can then use the second partition for backups and if the need arises erase and clean install the OS partition.
    It freaks me out however, and if i had the choice and money i'd definately go for a phisically seperate (internal) harddisk for backups.

Maybe you are looking for