Can't move a soundtrack file into Final Cut Express

I most likely doing something wrong. Who can give me directions for importing a Soundtrack file into Final Cut Express.

What I do Les is go to Share in Sound Track then ...Share to iTunes. Then I go to iTunes and drag it to the desk top then import via FC. There maybe is an easier way but I don't know it.

Similar Messages

Importing video files into final cut express

I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

Importing Files into Final Cut Express

I have a technical issue that I hope someone can assist me with...
I recieved 2 harddrives full of video clips that were shot in HD from a video production house. Here is the content on the drives: CARD 1 (folder), inside this folder there are 2 items (CONTENTS & LASTCLIP.txt) in the CONTENT folder are the following folders : AUDIO, CLIP, ICON, PROXY, VIDEO, and VOICE.
My question/dilemma: Can I import these clips into Final Cut Express to edit? I have an older version of Final Cut HD that won't work with these files.
Any and all input will be greatly appreciated.
-Greg

HELP ! Anybody, please help !
As you can probably guess. I've reached the limit of my "expertise" with your files ....... ".XML" sounds familiar but you will have to hang around for someone else to tell you whether and how they can be used.
One thing I am sure about (I think!) is that the latest version of FCE will be no better than the older one you have.

Can I import MTS files into Final Cut Express?

It seems like FCE only reads MOV and MP4 files, and sometimes it doesn't even read those for me. Is there no easy way to import and edit MTS video files?

If the source files are HD, then use Clipwrap:
http://www.divergentmedia.com/clipwrap
and convert the source files to Apple Intermediate Codec.
MtD

How do you import mpeg2 files into final cut express?

I have recently show my sons christening, and relied on a friend to do ths shooting. One of the tapes unfortunatley has broken, and I have had a second party transfer this footage onto DVD for me. He is also sending the footage through as an MPEG 2 file. Is there anything I can do with this using FCPE?

Convert the DVD's VOB files into a format that works natively in FCE. For DVD footage (which is SD), use MPEG Streamclip to do the converting. Here's a tutorial on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
MPEG Streamclip is freeware, but you may need to purchase the QuickTime MPEG-2 Playback Component from Apple if you don't have it already.
-DH

How can I import iMovie HD 6 project files into Final Cut Express HD3?

Trying to import iMovie HD 6 projects into FCE HD 3 but 2 windows appear:
Importing XML data
and below it a
SAVE window
If I click SAVE, both windows disappear, a file with nothing in it appears in browser and when try to play it in the viewer, there is just black....
Is this all because FCE HD 3 won't support iMove HD 6? so I will need to upgrade to FCE HD 4?

Use File>Import>Files.
iMovie Projects as a whole do not Import correctly whereas individual clips do but will need the audio rendering to play correctly.
Al

Can't open up "rendered" files in Final Cut Express

I exported files to my external hard drive to work on another computer, but can't seem to open the Rendered file. All the original media files are intact, just can't seem to open the "Project" rendered file.

All files copied fine. All "Original Media" and "Render Files" are intact -– my unedited video clips. However, there is a file that says "CurrentVersion.fcpevent" that will not open. I'm guessing that would be the edited file that I worked on at home.

Uploading Hi8 Videos into Final Cut Express

Hi,
I am having trouble uploading H8 video files into Final Cut Express.
What I have is:
Sony Player SLV-T2000
Canopus didital converter ADVC-100
I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
When I play the Hi8 tape I can see the video in the viewer but it will not capture.
Can someone advice me where I am going wrong.

Hi
May be You find something here (it's not only for iMovie but FCE/P too)
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

Open the file in QuickTime Player. Then do Tools > Show Movie Inspector. What does it say for Format and FPS?
At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec. If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first. Your clips have to match the properties of the Easy Setup you are using.
If it's neither DV or AIC then you need to convert it to one of those codecs. (QuickTime/DV or QuickTime/AIC) Many people in this forum rely on MPEG Streamclip (it's free and works great).

Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Absolutely. Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). Make sure you check the Self-Contained box. The export will be an exact copy of your Sequence, complete with any filters or other effects you've added. Import the self-contained movie back into the project (or another project) if needed.
-DH

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Importing AVI files into Final cut creates a pop

How can I stop getting a popping sound when I import AVI files into Final Cut. I figured it must be the type of file itself but I cant seem to find a free converter to convert my AVIs into what ever is need (which is what? .mov files?)
Please help

The very basics of non-linear editing is to know what video and audio codecs your particular NLE works with natively. FCP works with many video codecs but only a few audio codecs. Typically it works best with AIFF at 48khz, 16 bit.
You can find out all the various native codecs and formats in the User's Manual, Help Files or by looking through the Easy Setup list.
FWIW, both AVI and MOV are not really codecs at all; they are both merely containers that could contain video and audio made from any number of codecs. So saying you have an AVI file or a MOV file is kind of like saying you have a car ... it doesn't really tell anyone much at all.
Both QuickTime Pro and Compressor (which you most likely already have installed) should be able to convert to a native codec for use in FCP.
-DH

How to Encoding MPEG Movie to be able to import into Final Cut Express

I have MPEG Movie video clips that were sent to me. Title dvdMovie1chapter26.mpg (21.6MB) given to me from a PC taken on dvd video camera and compiled on CD disk. I would like to edit in Final Cut Express 4.0. I can not import in present form. Have used HandBrake and Toast 8 to encode. Divx and AVI to grainy. Have tried to make QuickTime Movie but 21.6 MB file went to 115.6 GB. Not sure how to set QuickTime options (Formats-Audio-Video Setting) in Toast 8 to encode with good quality this file so I can import into Final Cut Express. I will not have enough disk space to do all the video clips at 110 GBs or more per file. When I drag this file into Toast 8 with DVD-Video selected the file come into Toast as a Video-MPEG-2 720x480 29.97fps and Audio- Dolby Digital, Stereo 48000Hz File. Any Ideas?

How long is the movie? DV is 3.6MB/second. Handbrake is no good for this. I don't know if Toast will do it, but you can try MPEG Streamclip. You want to export to QuickTime using the DV NTSC codec at frame size of 720x480 and 29.97fps.

Every time I import an .fcpxml file into Final Cut Pro X, the timeline doesn't get imported

So I had exported an .fcpxml file from one machine, which i had to format. So, after formatting the machine, each time I import the .fcpxml file into Final Cut Pro X, The timeline remains empty

Use MPEG Streamclip from Squared 5 (free software) to convert the media to something like ProRes 422, then import into FCP X.
MPEG Streamclip can cope with many codecs.
Andy

Need help importing canon xf files into final cut X

Hello everyone, I am new to this site and am really appreciative of all the great information I have been able to obtain through everyones posts. I do realize this thred has been beat to death and apologize in advance for being slow. I am in the same situation as I have an xf 300 and 100 and for the life of me cant get all my files into final cut X. It's about to drive me crazy! I have taken the steps to download PikaFoto's workflow tool for the xf files but I am still having problems understanding how to use the program. Thankyou for providing this program as I am grasping for anything I can to get through this problem. Can I take the files directly into this workflow tool or do I need to go through my xf utiliy program? I just need a basic process to go from my camera to final cut X. A few of you guys have aparently been able to make this work with the same problem so I know it has to be something my tiny brain has not been able to process yet. Any help would really be great. Thanks

fredhil123 wrote:
.. when I place these files into the package contents of either of my libraries, Final Cut Pro X doesn't recognise them.
what a surprise...
FCPX is - besides many other features - a highly complex data-base application.- Just dragging some content just somewhere isn't the workflow how a data-base.app can manage its data. I dare to say, your experiments distructed your file-structure irreversible.
You should revert to some back-up BEFORE installing a beta.OS (!!) on a productive system.
quote https://appleseed.apple.com/sp/betaprogram/faq?locale=en
What if I have problems running the pre-release software?
Always back up your computer before installing pre-release software.
speaking of Yosemite: You signed an NDA on download NOT to discuss any issues with this public beta.......

Can't move a soundtrack file into Final Cut Express

Similar Messages

Maybe you are looking for