Can't move credits in title designer

Ok, this may be a very simple question because I know I have done this before.
I created a long list of credits in the title designer and I just want to animate them on the timeline
with 2 points, at the beginning and at the end so they will scroll up the screen.
When I move the position of them in the timeline...they just disappear?
What am I doing wrong that they are not scrolling up the screen but disappearing?
Thanks!

Danged thing is still queued.
Until then, and after you send your PRPROJ to Eddie as a .TXT file. Here are the setting you should have in the Roll/Crawl Options:
Title Type = Roll (radio button)
Direction (doesn't matter, as we have a Roll, not a Crawl)
Timing (Frames):
Start Off Screen = checked
End Off Screen = whatever you want it to do
Preroll = 0
Ease-In = whatever you need to look smooth
Ease-Out = whatever you need to look smooth
Postroll = 0
Click OK.
Now, in the Titler, use the Selection Tool and click on your Text Box. You should see the Bounding Box around the type. Move it until the top of the Text Box is right at the top of the Title-Save highlight. Note: you can move it up even more, if you want it quicker, because you have checked Start Off-screen.
Since you moved the Text Box, I'd hit the Vertical Center Tool to the Toolbox. It's to the right of the Horizontal Center Tool, and both are between the Align and the Distribute Tools.
Now, test it in your Timeline. If you want it to start even more quickly, go back and use your Selection Tool to move the Text Box up even higher, say to the top edge of the screen. That'll start it pretty quickly.
Good luck, and I hope that it's a setting issue, and that Eddie doesn't find something really amiss with your Project.
Hunt
PS, I still think that Keyframing this puppy would get you what you want and need in less time than the screen-cap is spending in the queue.

Similar Messages

Can you move a magazine app designed by another company to Adobe DPS?

My company had a digital company (who shall remain nameless) produce their magazine app under the (digital company's) information. I want to transfer everything over to Adobe DPS because frankly, this digital company did not live up to their promises, have terrible customer service, and are strictly just adding buttons to a pdf (not interactive at all). With that said, do I need to start from scratch and build a new app? Or can I just obtain the app that's already been created? If not, do I just tell the other company to delete our app? Thanks!

If you move to DPS you'll wind up building a new application using our tools and submitting that to Apple as an update to the existing application. Your readers will see an update to the app and when they download it they'll have the new version.
What is more complicated to sort out is whether readers would still be entitled to content they'd previously purchased. That depends a lot on you previous setup, how the previous product handled purchases, etc.
Neil

How can I move a title longer than the screen, no the page but just the title in FCP X?

How can I move a title longer than the screen, not the page but just the title in FCP X?

Select the title clip in the Timeline, Then Transform. Either click and drag or use the Inspector Position parameters to adjust.
Russ

I have two movie credits on my iTunes account. What are credits, and how can I use them?

I have two movie credits on my iTunes account. What are credits, and how can I use them?

You have a Puerto Rico address on your account ? From a quick search I've found one site from somebody in Puerto Rico that includes a screenshot for an app receipt showing tax of 7 cents added to a 99 cent purchase. Are you able to view the purchase history on the account that you've been using, and see what prices show on them (e.g. if the store's listed price or price plus tax) : Store > View Account menu option on a computer's iTunes, then 'see all' link next to the Purchase History section.

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

How can I move files using the title bar

I am using Mountain Lion, latest release (10.8.4) and am wondering if there is some secret options which would allow me to move files by clicking on the title bar (of e.g. preview) and moving it to a directory.
Unfortunately, I can only either create a link or copy the file. Moving seems to be deactivated, though I have learned from other forums posts that this was working under Tiger.
Any advise would be greatly appreciated.
Thanks,
equi

Depends on the application. iCloud-aware applications (Preview, Pages, etc) have the behavior you describe, and you can't move a file by dragging the thumbnail icon, but there is a small popup triangle to the right of the filename which contains the option "Move To" - you can then select your destination. It's not as seamless and dragging and dropping, though, I agree.
Non-iCloud-aware apps, like Office 2011, still allow drag-to-move from the titlebar icon.
Matt

Why can't I edit bookmark titles or move them to folders on the Apple Air?

I just bought an Apple Air after being a longtime PC user. My bookmarks got synched to the Apple by Xmarks, the Firefox app. Although I can use the bookmarks without problem, I can't move them, and this is particularly frustrating since I can't get them to where I want from the "newly bookmarked" tab. I also cannot edit the name of the bookmark when that option is available in the window that opens when I click on "bookmark this page" on Firefox. (I'm using Firefox 3.6).
Other than that the bookmarks work to get me to the desired site/page.Any help/suggestion would be greatly appreciated.
''edited for page formatting''

What broadband modem/router are you supplied with? Does it have built in wifi?
From your no 5, if there is no guest network then the TC is setup in bridge. This will remove the function of guest .. whatever Apple was smoking when they dreamed up this idea.. they need to stop it.
What I need is the IP address you are getting on the TC WAN if it is in router mode.. and the IP your iMac and air gets. I want router and dns values as well?
When the iPad or iPhone attempts to connect, what IP does it get.. plus router and dns.. it is the later two that are often the problem.
I would have a go at simply resetting the TC.. change the wireless name for 2.4ghz to short, no spaces pure alphanumeric.. and fix the wireless channel. Check what is available as Korea is not in my normal range.. 1, 6, 11 are pretty well universal though.. Try each of those channels.
Load istumbler onto the Air and see if you have thousands of wifi AP's around you.. find the lowest single channel out of the above.. do not worry too much about the inbetween ones.. they simply overlap.

I have updated from IPhone 4 to IPhone4S - how can I move my contacts from one to another?

I have updated from IPhone 4 to Iphone 4S - how can I move my contacts from previous phone to IPhone 4S?

Contacts are designed to be synced with a supported address book app on your computer, which is selected under the Info tab for the iPhone sync preferences with iTunes. Sync your iPhone 4S with the same address book app on your computer as you were syncing the iPhone 4 with.

Can you move the aperture library without losing images?

my library is defaulted to imac..
but can you house it on external drive..I know, yes, as a referenced library.
but I already have some [lots] images in library.
can I move the library and maintain contents?
also..
once you import into library, is the original image in folder it was in before? or it's deleted?
just trying to see what will work best for my needs?
as I sometimes travel/live in 2nd home and just carry external drive
thanks for input/suggestion

Menu>File>Vault
Creating what Ap[erture calls a 'Vault' seems like the easiest way to do it.
Here is the complete Help section on backing up your library.
QUOTE:
As you begin working with Aperture, it’s important to perform regular backups of your photos. Using the Aperture backup system, you can create backups and update them whenever you wish. Aperture tracks your backups and indicates how up to date your most recent backup is. In the rare event of equipment failure or an unforeseen catastrophe such as a fire or weather-related damage, you can easily restore the entire Aperture library onto your computer or a new computer.
You set Aperture to back up a copy of the library to a designated storage area called a vault. For safety and redundancy, use external hard disks to hold your vaults. You can create as many vaults as you deem necessary.
When you back up your photos, Aperture makes a complete copy of the library in its current state. If you remove items from the library, those items are removed from the backup when it is next updated.
All originals for managed images, all versions, and all metadata, previews, and adjustment information associated with your photos are backed up. The versions, previews, and metadata associated with referenced images are also backed up in the vault.
Important: Referenced images’ originals are not backed up in the vault with the library. Because the originals for referenced images are stored outside of the library, you must manage the backup and archiving of them yourself.
A typical backup system used with Aperture might look like the following:
This system backs up the Aperture library to two vaults stored on external hard disks. You routinely back up the library on one external hard disk. You use the second hard disk as a backup that you keep offsite. You can then rotate your onsite external hard disk with the offsite hard disk to keep all your vaults updated.
To set up your Aperture backup system, you need to do the following:
Determine the number of vaults you need. For example, do you need one for routine backups, one for weekly backups, and one for offsite storage?
Determine the number of hard disks you need for routine backups.
Determine the number of hard disks you’ll use for storing backups offsite.
Connect your hard disk drives to your computer.
Open Aperture and create the vaults you need, assigning a hard disk to each vault.
Update the new, empty vaults with copies of the Aperture library.
Disconnect one of the vault hard disks and take it to an offsite location for safekeeping.
When planning the amount of storage space you’ll need, estimate the amount of disk space needed to hold your existing digital images (photos you plan to import into Aperture) and the amount of space you might need for new projects. For example, RAW images typically require 8 to 25 or more megabytes (MB) of disk space per file. Estimating the number of photos in a typical project and the number of projects you usually create in a year, you can make a rough estimate of what might represent a year’s storage space.

How can I see the entire "title" of a page (now truncated)?

I see that Firefox is now truncating the "title" of web pages. I cannot see any good reason for this because the space to the right of the title is blank. I think it was done in the "do anything to make changes to Firefox" department but in this case it is not an improvement and provides the user with less information.
How can I fix the browser so I can again see the entire "title" as provided by the web page designer? I don't want to take extra steps (if any) to see it. I want it to display automatically each time.

That is on the tab. A tab has a maximum width because otherwise a long title would cover the full tab width.
You can make the Windows title bar visible again in the open the customize window via the 3-bar Firefox menu button (Customize is at the bottom left).<br />
There you will find the choice to have the title bar visible.

I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Here's one way to install. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

Can I move /library and/applications to a hard drive thusfreeing up space on my ssd?

I am trying to set up my new Mac Pro. The SSD is small (120Gb) I have plenty of hard drive space, I know how to redirect the user folder. Can I move the other lager foders?

RE: Redirecting Caches:
There are some tools in the Server Administration Tools (Workgroup Manager) that can accommodate automatic "Folder Redirection" of the ~/Library/Caches folder to another location at login, such as /tmp/yourname/Library/Caches/ by default.
This assumes you are running the appropriate version of WorkGroup Manager. You simply run the appropriate version of WorkGroup Manager directly on your Mac instead of on the Server:
The Managed Client.app Preference Manifest
One of the most powerful portions of the Details setup in Leopard [and later] is hidden by default. This is the preference manifest set built into the Managed Client application itself. The Managed Client application resides in /System/Library/CoreServices and contains the code used to run the entire MCX process. The compositor is also located here, along with the code to run mobile accounts, portable home directories, and much more. The MCX team built a very large preference manifest list in here that is continually being refined and revised.
The manifest is made visible by going into Details, selecting the /System/Library/ CoreServices/ManagedClient.app, and adding it to the set. The items show up as bold, gray items compared to the italicized items you already have. Some of the imports ask to replace ones you have already entered, such as Desktop. That’s okay; the values you have already entered won’t be disturbed. You will, however, be able to streamline some of your settings. Here’s a walkthrough of the manifest items offered by the Managed Client application:
Folder Redirection
This setting will help take some of the performance load off network home directory users. It is designed to force the current user’s Cache folder into /tmp on the local computer. When you must use network home accounts, this can mean a huge reduction in network traffic. More information is included in “User Accounts—MAs, PHDs, and More.”
To set this up, you open the setting to edit, select the Always domain, and add a new key. Choose Login Redirections from the pop-up menu. Now select that new subkey. Click to turn down the disclosure triangle, and add a new key to that key. This subkey will be called Redirect Action Info. When you open that key, you’ll see that the defaults are already filled in for you:
The default Login Redirections item
The other actions are Logout Redirection and Other Redirections. One key point here is that you cannot create a redirection to force the user’s home, or a subfolder, to an upstream or network location. These redirections take place before any mount points are available, so the redirection would fail.
from this white paper:
http://images.apple.com/education/docs/Apple-ClientManagementWhitePaper.pdf

Can't move toobars in IE 9 with Toolbars Unlocked

According to the IE 9 help files, I should be able to move and resize the various IE 9 toolbars by clicking and draging on the "command bar separator" but this does not seem to work.

Two years later and IE 10 its successor still doesn't work. I was brought to this thread with the Bing search of "unlocking toolbars on IE 10 is a joke because you can't resize them". I have a Trend Micro ONE SINGLE BUTTON on a TOOLBAR.....let
me repeat ONE SINGLE SOLITARY BUTTON on a TOOLBAR that some programmer decided from Trend Micro for their Trend Micro Browser Guard product couldn't be resized or have the button added to another toolbar like the command bar. At least LastPass allows for that
albeit it is not LastPass' default option also originally getting a single button on a single toolbar. One could end up with a lot of single buttons on a lot of toolbars and if you try to hide them the only option then presented to you
is they are going to be "disabled". IE 10 when you unlock the toolbars is a joke for you can't move the toolbars around to resize them or put them all on one row like the early days of IE. IE is pretty sleek, but I find myself using Google
Chrome now about 90% of the time. Don't care for the Google "apps", but do love a few of their extensions and I can slide those little buttons anywhere I want. I can also theme the browser. Come on Microsoft don't get like the politicians and
Carl Sunstein and that lunatic radical bunch who think we are sheep who, as Sunstein once commented, we can just "nudge" them in the way we want to go. We are not sheep and we won't be nudged by the politicians, who like to create a crisis
then propose the solution, and now apparently by the programmers with the same arrogant attitude, i.e. you'll take what we decide to give you, or at least they are giving the appearance of such from this perspective. Many of us didn't care
for the last Gnome desktop 3 that came out for Linux and walked away. Many of us didn't care for the Unity desktop that Canonical Ltd. implemented in Ubuntu 12.04 and walked away. We're not sheep and when you least expect it,
those sheep will spend THEIR dollars on consumers goods that do what THEY want them to do and not what your programmers want them to do. Google and Apple both are eating into your markets and when it comes to phones and tablets they are the markets and you
are the "man" outside looking in so quit thinking and behaving like a bureaucratic behemoth and remember the customer again for the first time if I can plagiarize a line from a Kellogg's commercial. Get rid of the programmers arrogance
or at least the perception that it is exists and go back to designing for what the customer wants and now what you want to give them. That my two cents. So peeved about not being able to (well "so peeved" keeping this all in perspective lol)
put that one little button and resize all the toolbars, after "unlocking" the toolbars which is a joke, I'm closing out IE 10 and going to play with my Google Chrome until it makes me mad. LOL Then I'll try out Opera, FireFox or
some other new browser which I have never tried. Who knows there may be a new browser leader lurking right out there on the horizon.

Can I move files frm 9.2 to Tiger with 1-3 periods in their filenames?

I need to move big collection of images & design files that have 1-3 periods in their file names.
Can I move them from my G4 (9.2) to my Intel iMac (10.4.9) without creating problems? I mostly use Quark, Adobe/Photoshop CS3, Acrobat & Preview (but no iPhoto, iLife, iSync, etc.), and archive my images in subject folders. I WAS opening the G4 folders & deleting periods and slashes manually - but UGH - I am burnt out. I've read conflicting info on the forums. Some say NEVER. Some say Yes. Some say only if it's OSX to OSX - - not 9.2 to OSX. I'm trying to do this right, to avoid problems down the line. Can someone help with this? Thank you.
iMac Intel 24" desktop. Mac G4 Mac OS X (10.4.9)
iMac Intel 24" desktop. Mac G4 laptop Mac OS X (10.4.9)

I have used lots of files with /s and multiple periods, with no problems. Some Unix based applications may not like the /, but the file-system doesn't mind it.
From Help in the Finder:
"You cannot use a colon (:) in the name of files and folders. Mac OS X uses this character to separate folders in pathnames.
In addition, some applications may not allow you to use slashes (/) or other characters in the names of items."
From
<http://developer.apple.com/documentation/Darwin/Reference/ManPages/mann/filenam e.ntcl.html>
"The normal Mac style names use colons as path separators. Paths may be relative or absolute, and file names may contain any character other than colon."

Can't move credits in title designer

Similar Messages

Maybe you are looking for