Can't move tabs in FF 22.0 or emails in TB 17.07.

For reasons I can not determine I am no longer able to drag and drop tabs in firefox or drag emails from my inbox to another folder in Thunderbird. I have restarted both, I have tried safemode with no success. This behavior started about 5 days ago (around July 18th/2013). I have gone through the support sites and forums and have not been able to find a solution that works. Anyone have any ideas? Thanks.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

  • Can't move tabs anymore and can't add tabs to or change homepage in new version 4

    I can no longer switch tabs positions, and I can't change homepage, i am stuck on top sites also lost all forward back new tab stop reload, I had to add them to the tool bars. If i can't move tabs or save and quit then I am going back to older version

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • I can't move or drag any folders/files/documents/emails anymore. I have to copy and paste them which is frustrating. How do i fix this?

    I can't move or drag any folders/files/documents/emails anymore. I have to copy and paste them which is frustrating. How do i fix this?
    I'm on the lastest software, and my computer is less then a year old.
    Please help me!

    If third-party software called "Air Display" or "AirParrot" is installed, remove it according to the developer's instructions, then restart the computer. Back up all data before making any changes.

  • Can't move tab to new window (tabs are locked) or open new window

    Hello All,
    I have updated Firefox to 28.0 and I am still having the issue with not being able to move tabs to individual windows, open individual windows or click on a web link to open a new window. If I right click on the link it will open in the window as a new tab but will not open as an new window. Can someone tell me if there is a lock on tabs/windows that freezes them? Please help.

    Thank you for the input - unfortunately this did not change anything. I removed all extensions and even reloaded Firefox after cleaning out all the hidden files and I still experience the same. I can hit the [+] and get a new page but I cannot open a link in an email unless I right click and open to a new tab - although it will not allow you to open to a new window. you cannot grab a window that is open and pull it so that it is it's own separate window. I have tried this using a different application and it does work without any issue. I do not want to use this application because I like using Firefox -- any suggestions would be appreciated. Just do not know what to do to fix this.

  • Can't move tabs in Firefox 17.0.1 Mac OS 10.6.8

    Whenever I click on a tab and drag it to either the left or right in its original window or attempt to drag it so it's own its own browser window, I get the cursor along with the thumbnail of the tab I'm moving, but I can't drop it anywhere. The only way I can get back to functioning is to force-quit Firefox.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Since installing Firefox 8 beta, can't move tabs around within the tab bar; can this be fixed without reverting to earlier version? Thank you.

    Before moving to Firefox 8, I could drag and drop tabs within the tab bar to reorder them, which was very convenient. Since installing the first beta of Firefox 8, the tabs don't move. Should I revert to an earlier version of Firefox? If so, which one? Thank you for any help with may favorite browser. Tom

    Tor Button addon was the cause in my case.

  • How can I move all my contacts into a single email group from all the other group?

    I've got several email accounts, but my contacts are spread across them. Of course, when I access or search my contacts they do all get searched together, but I need to delete an account and this will result in me losing many contacts.
    So before I do this, I want to consolidate all my contacts into my main personal email group account. But short of doing them one by one, I can't find a way and I have several thousand contacts at risk of being lost.
    Can anyone advise me?

    Go to your Contacts on your Mac - if more than one pick the most accurate; delete any contacts you don't want. Select all the contacts, and from the File menu choose 'Export...'>'Export vCard'. Save the resultant file safely: it will be your 'master' list.
    Now delete all the contacts from whichever device has the most in it. Sync with iCloud. If necessary repeat with different Macs. The result should be that the deletions sync to iCloud and in the end you finish up with empty Contacts lists everywhere.
    Now you can import your saved file to one of your Macs. Make sure you import it under 'iCloud' not 'On My Mac'. Then it should propagate iCloud and any other devices. Keep the saved file at least until you are satisfied that all is in order.

  • How to move tabs from one screen to another?

    Just started to group tabs. How can I move tabs from one screen to another to consolidate them into the groups?

    See <b>Tab Groups</b> (new in Fx4) (Panorama) [http://support.mozilla.com/en-US/kb/what-are-tab-groups What are Tab Groups] (video included)
    From one Window to another Window, by drag & drop
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

    i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!

    Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.

  • I used to be able to move tabs right or left by drag and drop in the same browser window. Now, after updating to 35-Mac, i can't do that. How can I do that now?

    using FF 35 on MacBook Pro

    Thank you for your response -- It seems the "classic theme restorer" add-on is the problem. With that enabled I cannot move tabs. With it disabled I can. I've used that add-on for years without issue on Mac and PC. The PC is still fine, just the Mac is problematic since the FF update about a week ago.
    So I guess that's the answer unless anyone knows of some other trick or setting to change so FF is able to have tabs below the address bar AND be able to move tabs left to right within the same browser window!

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • HT4236 how can i move pictures from the photo tab on my ipad to my computer (not the photo stream)?

    How can I move pictures from the photo tab  (not photo stream) on my ipad to my computer.  There are some photos that were taken with my ipad, that i want to delete but i can only edit them (straignten, crop, enhance etc)  any suggestions?

    How to Transfer Photos from an iPad to a Computer
    http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
     Cheers, Tom

  • Transferring rental:  what to do when itunes cannot see it in movie tabs but can see it in rental list?

    my ipad2 is connected to my mac mini.
    and i selected my device in itunes.....  
    when i click on the movies tab    i can only "see" one movie listed.    
    but can "see" two when i look at the list of items on my device under rental
    how do i move the movie to my mac when itunes cannot "see" it under the rental tab but itunes does "see" it in the rental list for my device?

    Click here and install the software.
    (71836)

  • Can I move the tabs further down the screen as in V3

    Open tabs are now at the top of the screen in V4 rather than further down in 3.16.6. This is a nuisance for me as I have a dell status bar at the top of the screen which keeps popping up every time I try to go to one of the opened tabs. Can I move the live tabs down screen at all?
    Also where is the quick click for home page?

    Right-click on a toolbar, then click on the "Tabs on Top" entry to de-select it.
    The home page icon by default has moved to the right hand side of the navigation toolbar. If the home button is not displayed, used the method in the following link to add it to the toolbar - https://support.mozilla.com/kb/How+to+customize+the+toolbar

Maybe you are looking for

  • Disbable button on alv report using oops

    Hi all, I have a button to toll bar of alv grid using oops based on that when the user clicks on that some action is performed and list is displayed again now when the list is diaplyed i need the button that i added to be disabled so that the user ca

  • Database won't start - ORA-1081

    All, I have a 2-node RAC cluster, RedHat 5.2, Oracle 11.1.0.6. All nodeapps including listener will start fine. When using the srvctl to start the database, returns error ORA-01081 Manual start for both instances returns this error: SQL> connect / as

  • Screen value not assign in field symbol

    Hi gurus,          I create a field symbol for module pool programming for assigning screen value. I create a tab in main screen and three subscreen for tab.  in first screen values perfectly asign in field symbol but second subscreen FS1,FS2,FS3 val

  • CK11 costing of repeated component item on bom

    Looking for a product costing solution to the following scenariou2026 Bill of material contains a component that is listed twice, but with a different procurement indicator (purchase vs. production) for each occurrence.  The reason for this is that t

  • Trac upgrade failed on console.py

    I just upgrade trac from 0.12.3-1 -> 1.0-1 It ask me to do 'trac-admin <repo_path> upgrade. When I done, it shows The upgrade failed. Please fix the issue and try again. AttributeError: I checked the trac.log: 2012-09-21 13:03:57,574 Trac[console] ER