Can't multi-track record MIDI... all channels sent to one track

Hi... I am trying to play back and dump all eight MIDI tracks of a Roland MC-505 pattern simultaneously to discrete separate tracks on the computer. In ProTools I was able to do this, but in Logic it's merging all the channels' data to the single track currently selected in the track list. Then when I press "stop" I see regions of identical size appear in all the other tracks, but they are only aliases without any data in them.
I have each track in Logic set to its single respective MIDI channel in the Inspector, but it doesn't seem to make a difference one way or the other, with regards to what's going on here.
Much thanks,
scotty

I don't know if this will help you but there is a song setting that you can try.
Go to Settings > Recording Tab > and enable (check) "Auto Demix by Channel if Multitrack Recording".
That may help you.
Best rgds,
Ken

Similar Messages

  • How to get number of records in all user tables in one select

    Please advise how to retrieve the number of records in all user tables in one select. I would likt to extract the data to excel file.
    Many thanks,
    Andrew

    You could always analyze the tables:
    declare
    begin
      for X in (select owner, table_name from all_tables
                 minus
                select owner, table_name from all_external_tables) LOOP
          dbms_stats.Gather_Table_Stats(X.Owner, X.Table_Name) ;
      end loop;
    end;
    /Then: Select Owner, Table_Name, Num_Rows from All_Tables ;

  • Logic connects all existing recordings in one track when recording....

    This is a strange issue I am having every once in a while which messes up my whole file. This happens when I record a track. After I am done, it connects every file I have recorded IN that one track, making it a very very long file. Well, no problem, I just undo. Well, now it has erased EVERYTHING IN that track. If I do undo again, it brings everything back BUT, only a small little part of each of the track. I am talking about a very small slice. I then try to grab that slice on the bottom, trying to extend it, but can't. What is the deal here. I then have to quit (not saving of course) and re-open the file. Anybody else have this problem?

    Thanks Eric.
    I do have 10.5.6, I need to update that. Just to clarify, Im not talking about recording audio, Im talking about recording an Audio instrument.
    It messes up my file in that if I forget to save for a while and this happens, I have to quit out of it since I can't get any recordings back that I had in that whole specific track.
    It looks very strange. For example if I have about 10 small files in that track, it puts them all together in one long track. Sure I can cut them and it would be fine but, I'd rather get this fixed.
    My start up disk still has 121GB space left and when I record audio, it's at 48k.

  • How can I get a list of all channels of a device?

    I'm writing a software for use in a couple of our labs to be run as an executable i.e. without LabView being installed on all machines.
    Now there's also a couple of different daq hardwares in use. So I planned to have a config tool where the user can choose the appropriate - physical, not virtual - daq devices and channels like: temperature 1 measured by device 1, analog input 2.
    Therefore I'd need a list of all available daq devices (which is somewhat possible) together with a list of all channels of a particular device. Is there any way to get this?
    Unfortunately I don't want to use virtual channels since I don't want to bother the user with configuring them and btw I don't know if virtual channels work wit
    h the pure run-time module of an executable.
    Thanks!
    Daniel

    Hello Daniel,
    You can use virtual channels with executables and there is actually a way to transfer the virtual channel configurations to the target computers so your users would never need to mess with configuring virtual channels. Once you have configured virtual channels, you can save the configuration within a .daq file. You can then include that .daq file as a support file of the executable and programmatically set the configuration of the target machine. The linked document below illustrates how to accomplish this.
    How Do I Port a DAQ Configuration File With an Executable?
    http://digital.ni.com/public.nsf/websearch/CB83B101E19EF83086256A3E0054206C
    If you do not want to use virtual channels, the only other thing I can think of is to use the Get_D
    AQ_Device_Info VI or function call. You can get a device code when using this VI or call and each code is associated with a specific instrument. You would then have to know (use the device's user manual) to determine how many channels the corresponding device has. Without virtual channels, you would have to use a channel number (0,1,2,...etc) and would not be able to use a string ("temperature 1 measured by device 1").
    So, I think using virtual channels and transferring the .daq file to the target machines with the executable will be the best option. I hope this helps.
    Regards,
    Todd D.
    NI Applications Engineer

  • Can I use the marker option to separate files in one track

    Hi, Can anybody give me some advice please on how to record an audio track (speaking) one channel in stereo then split into separate parts like chapters in a book. Its for a charity group Talking Newspaper for the blind. They have readers reading local newspapers clippings which end up as MP3s used like electronic books.
    Thanks

    Hi markbrads, in order to come up with some useful advice we have to know a bit more about the production in general:
    a) are you recording / narrating it all by yourself or is it a engineer - narrator setup? How is the microphone connected?
    b) the rec setup is crucial if you do not want to have heaps of edit work (sound wise) afterwards!
    and
    b) to decide on a production technique will depend on how experienced the narrator is. If you are the producer, rec-engineer and narrator all in one person,  then you will have to plan a few thing in advance. The ideal narration production is the one where the narrator reads the script in perfect intonation and all gets recorded in one recording take. However, this seldom is the case! So there is always some editing involved. As producer/engineer you'll have to decide if you want to do corrections on the recording straight away or afterwards. You usually do not want to record 10 A4s of text in one take, split the text in parts and record them separately . Experienced narrators do not panic when mistakes happen, instead they calmly finish there sentence, wait a second and then start the same sentence again as if nothing has happened. The engineer will insert an edit marker without any need to stop the recording. After the recording you'll have to edit the parts and make a continuous narration from it.
    So in short, are you engineering, narrating and producing or do you engineer/produce the voice recordings?
    Have a nice day!

  • How do I make all the clips on one track the same volume?

    I am trying to raise the volume equally on all the clips. One would think that it would be as simple as turning up the volume knob on the audio mixer on the track with all the clips, but of course not, that would be TOO simple. When I raise the volume, it keeps jumping back and forth as if I asked it to key frame the volume knob. How can I perform the simple task of raising all the clip volumes to the same volume ?

    VideoHero
    I do not recall what version of Premiere Elements that you are using nor the computer operating system on which it is running.
    So, I will generalize for now, referencing version 12...
    1. Assuming you have several Timeline audio clips that you want with the same volume...select the first, go to Adjust Tab/Adjustments Palette/Volume Panel expanded and adjust the Volume.
    2. Then right click the that first file (with the adjusted Volume), select Copy.
    3. Select all the other audio clips that you want to have the same Volume level. Then right click anywhere in the selection and select Paste Effects and Adjustments.
    Does that work for you.
    If you have video with its audio linked to it, depending on the specific circumstances to be discussed later, you might want to unlink the audio and video beforehand.
    Please review and let us know if that works for you. Any questions or need clarification, please do not hesitate to ask.
    Thanks.
    ATR

  • How can I print out a musical score?  Not just one track at a time.

    Hello,  I am a composer and I would like to print out a piece that will have piano, voice, and possibly other instruments on it.  So far I can only seem to print one track at a time rather than the whole piece.  I would REALLY appreciate any help!
    Thanks!
    -Kim

    No problem.  Finale's full software package is pretty expensive, but they offer a scaled-down $10 version called NotePad which will import MIDI files and print scores.  I'd suggest starting with that and seeing if it is sufficient:
    http://www.finalemusic.com/NotePad/default.aspx

  • How can I track all email sent from one particular user through powershell?

    Went online and found a few commands like:
    Get-MessageTrackingLog -Server servername -Start "11/17/2014 09:00:00" -End "11/17/2014 17:00:00" -Sender "user@domain"
    Got back:
    Get-MessageTrackingLog : The term 'Get-MessageTrackingLog' is not recognized as the name of a cmdlet, function, script
    file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct
    and try again.
    At line:1 char:1
    + Get-MessageTrackingLog -Server Mail2013 -Start "11/17/2014 09:00:00" -End "11/17 ...
    + ~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (Get-MessageTrackingLog:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    ALL I WANT TO DO IS TO TRACK EMAIL SENT FROM A PARTICULAR USER: Delivery reports in the EAC came up with absolutely nothing after entering the user mailbox and user
    Any help would be appreciated - RJM

    try this :
    get-messagetrackinglog -Server mail01 –resultsize unlimited
     -Start "11/17/2014 09:00:00" -End "11/17/2014 17:00:00" -Sender "user@domain"| Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
    | Export-CSV c;\tracking.csv
    Then import file to excel
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

  • ITunes--can't get a book on CD to go from one track to the next

    I have 12.01 and Yosemite on a MacBook Pro. I had no trouble playing audiobooks on CD in previous versions, but now it will only play the same track over and over; I have to manually tell it to proceed to the next track. How do I tell it to play each CD from start to finish?

    I'll rephrase my question since there's no response on my previous one.
    How come the songs on my iPod play one song only and repeats it again without automatically going to the next song on the cd/collection.
    At first, all went accordingly but I don't know what I did that they now don't play automatically but has to be done manually from one song to the next.
    Thanks!

  • Problem with track layering: How do I make only one track repeat?

    When I am working on a specific track, if I want it to be a repetition, you can drag the green line above to cover the notes you want to repeat, however, when I do this it repeats all tracks.
    So how can I have a drum pattern that repeats over and over and then have a different instrument that I don't want to repeat?

    You are doin'it wrong!
    The green bar is for cycling play and record not to loop.
    When you select a track in the left pane there is a Loop option: activate it.
    cheers
    rob

  • How can I change the sender details on emails sent from one of 2 iphones linked to my itunes?

    I have 2 iphones set up on my itunes, one for me and one for my husband, when he sends an email from his iphone it shows as being sent by me not him. His hotmail email is set as the default on settings and it is his emails in the inbox,how can I change this?

    Use Settings > iCloud. Choose Sign Out at the bottom and then Sign In with your iCloud ID.

  • '24 Track Recording' - all channels peak at 3db

    It seems that if I start a new song with the '24 Track Recording' template, all my audio and instrument channels peak at 3db. Is that normal?
    I checked and it doesn't matter whether the played back file is 24 or 16 bit.
    How do I change it so that it shows peaks at 0.
    I searched through all the preferences I could find, but could not find a 'Channel level' setting.
    Any help or advice appreciated.

    i think we need a little more detail in your question. why don't you just drag the sliders down? in any case you can run audio out in logic really hot before you have any distortion or clipping. in fact, logic sounds better driven hard. you only have to be careful when you are recording not to exceed 0 db. you can drag the master fader down for this.

  • Recording more than one track at a time...

    Ok, so heres my problem.
    This is going to be my future setup...
    for recording drums of course.
    so I'm going to have around 6 microphones. A mixer, and i already have an interface. And of course i use soundtrack pro.
    so if the microphones are all plugged into the mixer, and the mixer into the interface and the interface into the computer... wouldn't all the 6 microphones be one track on soundtrack pro? i mean... you can only do so much editing on a mixer. It would be very nice if i could edit every single mic separately.
    so in conclusion...
    i want to record 6 tracks all at the same time with every single track a different microphone.
    if that is not possible, could somebody maybe tell me how i could do something relatively close to that.
    thank you.

    You have to set each track to a unique channel. Open track info and select Channel 1 for one of the tracks, and Channel 2 for the other.

  • Pass a Collection of multi-column records from JAVA to Plsql

    Hi,
    I need to pass a Collection of multi-column records(say Employee Id, Employee Name and Employee Address) from a JAVA application to an Oracle package/stored procedure
    for data processing and updates.
    I initially thought of using a pl/sql table as an input parameter, but then I came to know that a pl/sql table can have ONLY one column and an index (can be a String in
    the case of an Associative Array). Please let me know if my understanding is wrong here.
    I then thought of using a PL/SQL table with a RECORD type as an element. But, I came across a documentation that says that, Oracle JDBC does not support RAW, DATE, and PL/SQL RECORD as element types.
    Could you please let me know how I can pass multi-column records from JAVA to an Oracle Stored procedure as an input parameter? Millions of rows would be sent by the JAVA program to the Oracle Stored procedure.
    Any help will be highly appreciated.
    Regards,
    Sunil.

    There are several examples in the " Working with Oracle Collections" from the "JDBC Developer's Guide and Reference". You can either use a Map to create Java objects that are created with the Oracle objects data or the generic oracle.sql.STRUCT interface.
    http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/oraarr.htm#1047581
    http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/oraoot.htm#1039477

  • How can I change view options for ALL playlists?

    How can I change view options for ALL playlists? With one single click or trick?
    I have a lot playlists and don't want to change every single one of them separatly.
    Thanks for your help. (I use Windows 7)

    There's no FAST way I know of, which is what I think you mean.
    Only the painful SLOW way of one-by-one.
    You could make a new playlist from the main library after you've set the columns up as you like.
    Go to an existing playlist that doesn't have the columns you want, and select all.
    RIght-click > Add to Playlist and send them to the new playlist.
    That's still one-by-one and only works with static playlists, not smart ones.

Maybe you are looking for