Can't new iTunes/Quicktime - Error Message

Hi,
I've done this in a separate post b/c I didn't see anyone else with this error message. ITunes starts to download normally, but then I get this message:
"Errors encountered while performing the operation. Look at the information window for more details."
Where is the information window? There is nothing on my screen that tells me what the error is, like an error number that other people seem to have... I've tried downloading on a few separate occasions and I keep getting this message.
Thanks in advance if you can help or have suggestions.

hi AndreaB!
"Errors encountered while performing the operation. Look at the information window for more details."
... i can't recall having seen this particular error message before, either ... but my memory is fallible ...
just checking to see if i'm clear on your situation ... you're getting this on an itunes installation? if so, are you running the install online, or are you downloading and saving the file to your hard-drive, and then running the installation from there?
if the latter, is the error showing up during the download or the install?
love, b

Similar Messages

Itunes + quicktime error message - service 'ipod service' (ipod service) fa

Help! Got new iPod Nano for Christmas and I STILL cannot get it to show up in iTunes - it has showed up in my device manager - with an over the icon - "The drivers for this device are not installed (code 28) To reinstall the drivers for this device, click Reinstall Drivers. - Then another error - Wizard cannot find the software to instal -(my iPod did not come with a disk!!!) I have done the "R's" several times! Downloaded and installed and uninstalled several x's from iTunes. Changed USB locations - I have three to choose from. Now - I am 'repairing' the latest installation from iTunes and I get this "itunes + quicktime error message - service 'ipod service' (ipod service) failed to start. Verify that you have sufficient privileges to start system services". Any ideas??? I'm not a computer genious....but I'm not a complete newbie, either! I am so FRUSTRATED!!!! This should be that difficult - I added additional RAM and it was a breeze and successful! This is just ridiculous! Any one have any other ideas???? I have read so much - even emptied the battery and recharged!!! HELP! Please! I just wanna hear some music!!! waaaaaaaaaaaaaaaaaaaaa!

Thanks - I got it to install by going into 'run' to get to permissions, etc. So that seems OK - but my computer is still not acknowledging iPod software and for some reason iTunes is now showing 'the URL could not be opened' when I go into Help for iPod. It's still not showing up in Itunes, either

I can't update the new itunes Iget error message that I have to remove installer and retry I have done this and still have same message

I'm having trouble downloading the newest version of itunes keep getting error message any suggestions?

What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

Trying to download new itunes but error message wont allow me to

I am trying to install the new itunes on my windows 7 64 bit pc and when its about to finish an error message pops up. Message states "Click OK to try again, or enter an alternate path to a folder containing the installation package 'itunes64.msi' in the box below." i go ahead and try to choose a path and it did not work. i tried with bonjour and quicktime and they all state the same message about trying to find the same type of folder. i tried going into control panel and deleting the software and same message comes up. i tried downloading some sort of windows cleanup tool for windows 7 64 bit and got nothing. Anyone out there that can help i would really appreciate it.

i tried downloading some sort of windows cleanup tool for windows 7 64 bit and got nothing.
Could you wa;lk us through what happened (when you tried to use CleanUp) in a bit more detail please, miami?

Can't Open iTunes-Quicktime error

When I last tried updating my iTunes I had to cut the installation short and ever since I haven't been able to start iTunes. It tells me that Quicktime was not found and to reinstall iTunes. I've tried reinstalling iTunes many times but it doesn't work. My computer says I have Quicktime so I don't know what to do. Please Help!!

I experienced this same problem and struggled with it for two weeks. I had uninstalled and reinstalled many times. I had even installed Quicktime and Itunes as standalone products but still could not get past that error message or the "find Quicktime.msi" message. What finally fixed it was uninstalling (again) both Quicktime AND Itunes. I recommend backing up your music files just in case. Info on how can be found on the Apple website. Then go to http://support.microsoft.com/kb/290301 and read about and install Windows Installer Cleanup. After installing it, run it and select any Quicktime, Apple and Itunes products only. You should include the MobileMe and Safari programs, as well as anything that is related to Itunes. If you are unsure, verify them first before selecting them. Once you know, select the programs from the ones Windows Installer Cleanup lists one at a time or hold down the Ctrl button and select multiple programs. Just be sure you are not selecting a program not related to Apple, Quicktime or Itunes. Once that is done, restart your computer and download Quicktime as a stand alone product (not with Itunes). Then download Itunes as a stand-alone product (not with Quicktime). I did not select Itunes as the default player, but I don't think it will make a difference. It FINALLY solved my problem. Apparently I had bits of the programs still on my computer after removing them, and it was messing up the new installations. Good Luck!

Can't open iTunes, no error message

I have the itunes icon on my windows but when I open itunes it will pause for a bit with the hourglass thing and then nothing. I looked in my task manager and it doesn't show anything running. I don't get any kind of error message, any ideas???

Does Quicktime work, if not does it give an error message.
If quicktime works then:
A couple of things to try, spyware can sometimes do this so do a scan. There is a free spyware scanner here:
http://www.ewido.net/en/download/
Then take a look at this article on troubleshooting launch problems.
http://docs.info.apple.com/article.html?artnum=302856
I would start with the bit about digital signing at the bottom as this can cause error message free failures.

Can't open iTunes - has error message - Hope someone might be able to help

I had everything working about two weeks ago. I was able to download my CD's on the Nano.. Then my computer had to be reloaded with XP.. Lost iTunes..... I reinstalled it at least three times, but it will not work, even downloaded the new edition.....comes up with the following:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. Etc....
What am I doing wrong? Please advise if you have had the same problem..
Thank you.

Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Can not open iTunes, get error message 126

Unable to upgrade iTunes to lasted version. Got error message about a missing file. Tried to uninstall and reinstalled, after deleting Temp folder from C drive, but still get error message 126. Can anyone tell me what I need to do?

Hello mvguillet,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can't open iTunes. error message: MSVCR80.dll is missing

Can't open iTunes.
Get error message that MSVCR80.dll is missing. Try reinstalling.
Tried reinstalling. Same problem.

iTunes for Windows: Missing MSVCR80.dll

Trying to download new itunes 10 error message

At the last minute of download I keep getting error message to close itunes even when itunes is closed

i tried downloading some sort of windows cleanup tool for windows 7 64 bit and got nothing.
Could you wa;lk us through what happened (when you tried to use CleanUp) in a bit more detail please, miami?

I can not download new iTunes. Error message....

"This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead"
But I dont know where to go to download the 64-bit installer...Please help!
Thanks, Brandy

http://www.apple.com/itunes/download/
It should say it is a 64bit version
If not, try a different browser..

Can't open iTunes. Error messages says: "Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item." Help?? (Windows 7)

I have tried uninstalling iTunes and all of it's "Apple counterparts" (like Quicktime, Bonjour, etc)
I have also tried to restore my computer to before it crashed, and that didn't work either.
Please help!

Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu

Can't access ITunes. Error message"Can't connect to iTunes store"

Help!

Try restarting and the iPhone.
If that doesn't do it, one thing that others have done to fix this is manually set the time incorrectly (Settings > General > Date & Time), test again, and then set it back to the correct time.
You can also take a look at this Apple doc for other ideas -> Can't connect to the iTunes Store

New itunes library error. How do I fix this?

When I try to open itunes up on my laptop the "new itunes library" error message pops up. When I plug in my itouch/iphone, itunes still doesn open. The same message pops up. I downloaded another itunes and installed it without doing anything to my original itunes, but then I get an error message stating the older version cannot be removed. HELP!?!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Upgrading itunes for new ipod 30mb - getting quicktime error message and

Hi there,
I am upgrading itunes 4.7.1 for a newly purchased ipod 30mb using itunes site downloaded setup.
I am getting an error message as it reaches a certain point and won't install.
I get this:
The cabinet file "QuickTime.cab"required is corrupt and cannot be used. This could indicate a network error, and error reading from the CD Rom or a problem with this package.
Then I get
'The installation of QuickTime did not complete. Itunes needs QuickTime'Error message 2350'
This is on a PC with an earlier version Itunes 4.7.1
QuickTime is supposedly up to date and presents not problems.
Any help would be appreciated I am a klutz....
hp pavilion f1903 Windows XP

After comprehensive net search I resolved the problem by downloading itunes/quicktime in IE. I had been using mozilla and it was a simple as this!

Can't new iTunes/Quicktime - Error Message

Similar Messages

Maybe you are looking for