Can't OC anymore?

Can't seem to OC system anymore.  Been using Dynamic OC (General setting) for a few weeks now and everything was working great.  CoreCenter use to show cpu running at 2000Mhz (200x10) when idle and 2200Mhz (220x10) when cpu at 100%... now just 2000Mhz.  I was running CoreCenter 1.6.1.  Tried upgrading to 1.6.2, but no help.  Reloaded bios defaults.  Manually, set fsb to 220, but CoreCenter still shows fsb @ 200.  Not sure what happened?
My system is as follows...
Athlon64 3000+
K8T Neo-FIS2R (bios v1.2)
1GB (2x512) DDR PC2700
Also, does anyone know if CoreCenter is needed for Dynamic OC to work?

BIOS settings look fine... the same as I've always had it.  The settings I have now in Frequency/Voltage control are...
Unused PCI Slot Clock: Disabled
Cool'n'Quiet Support: Disabled
Spread Spectrum: Disabled
Dynamic Overclocing: Disabled
CPU FSB Clock: 220 MHz
DDR Voltage: Auto
CPU Vcore: Auto
AGP Voltage: Auto
I ran the SiSoftware Sandra CPU Arithmetic Benchmark and noticed the score is about the same whether I'm overclocking or not now.  When overclocking use to be working, the scores were better when overclocking.  When overclocking to 220 (10%), the benchmark score would be approximately 10% better.
I think I'm going to try and clear BIOS using the JBAT1 Clear CMOS Jumper.  I did that once when originally building the PC and that corrected weird problems I had with the Promise RAID.  Very strange...

Similar Messages

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • My computer is off and set up on Japanese. I can not login anymore because I type the password in English but the keyboard was set up last in Japanese language.how can I change the language by using the keyboard only so that I can write in English my pass

    Hi
    My computer was shut down. It was set on Japanese Hiragana language before shutting down. Now I want to login with my password in English. Yet, teh keyboard was set in Japanese and thus, I can not login anymore. How can I reset/change from Hiragana Japanese mode to Englsih ( US) with some shortcuts on my keyboard?
    thank you

    Try Apple/Command + space.
    For the future, go to system prefs/accounts/login items and check the box for Show Input Menu on Login Screen.

  • How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)

    How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)? Whenever I try it always wants to send things to my email address to confirm. I have a new apple ID and a new email address, I want to use this now for my iphone and my macbook air but I can't and I'v

    Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

  • HT4314 Can't see anymore which games my friends are playing, always NONE PLAYED on iPad, wrong/old games on iPhone.

    Since about a month I can't see anymore which games my friends are playing.
    On the new iPad it always display: last game played, none.
    On iPhone it shows wrong games for many.
    On both the timeline is correct tough.
    I thought it was a temporary thing but now it's more than a month and it's really annoying.
    Any clue?
    Thanks.

    Since about a month I can't see anymore which games my friends are playing.
    On the new iPad it always display: last game played, none.
    On iPhone it shows wrong games for many.
    On both the timeline is correct tough.
    I thought it was a temporary thing but now it's more than a month and it's really annoying.
    Any clue?
    Thanks.

  • I'm getting Could not initialize the application's security component, when opening Firefox and I can't bookmark anymore, why?

    Here is the message I get when I open Firefox;
    Could not initialize the application's security component. The most
    likely cause is problems with files in your application's profile
    directory. Please check that this directory has no read/write
    restrictions and your hard disk is not full or close to full. It is
    recommended that you exit the application and fix the problem. If you
    continue to use this session, you might see incorrect application
    behaviour when accessing security features. Plus I can't bookmark anymore.

    Rename secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.
    You may have to rename cert8.db (cert8.db.old) as well.<br />
    Firefox will create new files.

  • No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing  and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

    No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing  and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

    I accidentally solved my mystery.  For some reason it was set to "print to file".  I changed it to "printer" and now I am able to print.

  • In my text messaging blog, I can't edit anymore and keep some of the text blog and delete the rest ? Any way to do this (like I could before the recent iOs 7 "upgrade"

    In my text messaging blog, I can't edit anymore and keep some of the messages and delete others since the "upgrade" to iOs 7. Can I do this somehow?

    Tap and hold on any message in the thread. Tap "More" in the pop up menu. Select the message(s) you want to delete. Tap the trash can in the lower left corner.

  • Why,  after a while, Itunes on my PC can't read anymore Ipad?

    Why, still after around 15 months from the purcvhase, after a while, Itunes on my PC( win7) can't read anymore Ipad and the only way to make it work is reinstalling completely Itunes once again?
    I tried the proceeding suggested on the help online( cleaning the previous installation deleting some folder and so on): no way.
    Thank you

    The stores menu is at the very top Along with
    File, Edit, View, Controls, Store, Window, Help
    You want Store > Authorise this computer.
    It is not inside the iTunes Store

  • Can't scan anymore.

    I have a C4680. Can't scan anymore. What might be the problem? Then i tried to download a drive from HP thinking it might solve the problem. The screen says click "download" to start downloading. But where is the "download" button?
    Thank you.
    This question was solved.
    View Solution.

    Hi @Sky1 ,
    Welcome to the HP Forums!
    I see that you cannot scan with your HP Photosmart c4680, on Mac OS X 10.10. I am happy to help!
    For this printer on Mac OS X 10.10 there are no full feature software and drivers from HP. Only a generic driver that is built-in to the Operating System, as shown in this guide, HP Printers - Installing a Mac Printer Driver Using Apple Software Update.
    To scan, you will want to go through this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for a different printer and Operating System, it will still apply to your situation.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I have in stalled Chicalogic and now I can't use anymore Mozilla what can I do to solve this problem?

    I have in stalled Chicalogic and now I can't use anymore Mozilla what can I do to solve this problem?

    According to several websites I've read, Chicalogic looks sketchy at best, illegitimate and spyware at best.
    [http://forums.malwarebytes.org/index.php?showtopic=78653&st=0&p=403467&#entry403467 http://forums.malwarebytes.org/index.php?showtopic=78653&st=0&p=403467&#entry403467]
    Registry cleaners have very little good use, and usually end up damaging more computers than they fix. I'd recommend uninstalling the software.
    That being said, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.

  • I've a very important document which I can't open anymore: You need a newer version of Numbers to open this spreadsheet.

    I've a very important document which I can't open anymore: You need a newer version of Numbers to open this spreadsheet.

    I figured out that it doesn't matter, actually it is Qsync, but other prgrams such Sugar Sync  create teh same problem
    The sync program adds a suffix to the files insite the numbers container
    When looking at the files inside the Numbers file/folder, I saw this (note: Alphonse is the name of my computer):
    drwxr-xr-x@ 9 thibaut  staff   306B Mar 14 09:21 .
    drwxr-xr-x  8 thibaut  staff   272B Mar 14 09:30 ..
    -rw-r--r--  1 thibaut  staff    26B Mar  4 14:31 .LSOverride
    drwxr-xr-x  2 thibaut  staff    68B Mar 14 09:21 Data
    -rw-r--r--@ 1 thibaut  staff   262K Jan  3 13:21 Index (from Alphonse).zip
    drwxr-xr-x  5 thibaut  staff   170B Mar 14 09:21 Metadata
    -rw-r--r--@ 1 thibaut  staff   101K Jan  3 13:21 preview (from Alphonse).jpg
    -rw-r--r--@ 1 thibaut  staff   1.4K Jan  3 13:21 preview-micro (from Alphonse).jpg
    -rw-r--r--@ 1 thibaut  staff    11K Jan  3 13:21 preview-web (from Alphonse).jpg
    I renamed the files to remove the suffix, like this:
    -rw-r--r--@ 1 thibaut  staff    11K Jan  3 13:21  preview-web.jpg
    drwxr-xr-x@ 9 thibaut  staff   306B Mar 14 09:32 .
    drwxr-xr-x  8 thibaut  staff   272B Mar 14 09:30 ..
    -rw-r--r--  1 thibaut  staff    26B Mar  4 14:31 .LSOverride
    drwxr-xr-x  2 thibaut  staff    68B Mar 14 09:21 Data
    -rw-r--r--@ 1 thibaut  staff   262K Jan  3 13:21 Index.zip
    drwxr-xr-x  5 thibaut  staff   170B Mar 14 09:21 Metadata
    -rw-r--r--@ 1 thibaut  staff   1.4K Jan  3 13:21 preview-micro.jpg
    -rw-r--r--@ 1 thibaut  staff   101K Jan  3 13:21 preview.jpg
    That fixed the problem and the file now opens correctly in Numbers 3.
    You can take the numbers file into a windows machin, the file is shown as a folder and then remive teh suffix.
    and like magic the file can then be opend  in Numbers V3.1

  • Help! I can't add anymore apps..

    Hi,
    Not sure what to do here, I can't download anymore apps. I have filled up all 11 pages. On the iPod I can stack apps into their own sections but I can't do that on the iPad. What can I do without deleting apps.
    Thanks

    HI and welcome to Apple Discussions...
    Just in case, connect your iPad to your computer, launch iTunes. Select the Summary tab.
    You can see available storage space at the bottom of that window.
    Carolyn

  • My phone says that i can't store anymore in iCloud?!

    My phone says that I can't store anymore in iCloud, because the storage is full, how do i delete stuff from iCloud? Or what else can I do?

    See http://support.apple.com/kb/ht4847.

  • Itunes error can't purchase anymore cause of Itunes purchasing bug. help

    Hey guys
    I have an Iphone 3G and I had (Currency app) installed version 1.0 and updated to 1.2 and it said "you must pay to upgrade to this pay accept. so I did but it was a free app and now my itunes is locked and I can't buy anymore cause it has a $0.00 charge it CAN'T charge $0 to my card so its stuck.
    I don't think I can fix this it needs to be reset inside by apples tech support. Any idea how I can get hold of them. do they have a email address for errors?
    Thanks for the help
    Sam

    If you ever get a receipt from them, they give you links in the email receipt to report problems. I also believe in iTunes under the help menu (or Store...forget what menus they have as I am at work) there is a menu item to report a problem.

  • ITunes 10.6 can't sync anymore with my readynas duo

    Since I downloaded iTunes 10.6 version, I can't connect anymore to my readynas duo server.
    I can still see my readynas as a shared device from iTunes menu but when I try to connect to it a timeout occurs.
    I'm looking for a workaround solution if possible.

    Hi,
    SMS is the term for text messages. Only mentioned it to give full background. Don't think it's relevant to the issue at hand.
    Thanks!

Maybe you are looking for

  • I interrupted the upgrading of muse and it will no longer open up. It's there but not complete.

    I hadn't used Muse in a while and opened Abobe Muse, it informed me that it need to be updated along with Adobe Air.  Somehow I interrupted the upgrade and it will no longer open as a program. I am not sure if I should uninstall the program and reins

  • Windows 8.1 Pro fails to receive WSUS patches with 8024500C error

    Hi I have just added my first Windows 8.1 Pro to the domain. The WSUS server is running SP2 and has the KB2720211 and kb2734608 patches installed. The WSUS server has sync'ed with microsoft.com several times, SQLCMD has been run and the cleanup wizrd

  • Parsing code called twice

    Somehow my code is being called twice with the result that everything has the same name twice (multiple names are legal according to the DTD). My parsing code looks like this: public Channel getChannel(Node channelnode) Channel channel; NodeList chan

  • CS5 web premium suite, download, installation - problem

    I am trying to download and install the CS5 web premium suite, after downloading all night and progress bar showing completion, I see an error: Error extracting the product installer(101). Check for availbale disk space on your system and try downloa

  • Flash pro css3 update from f8

    Hi, I'd like to install flash pro cs3 pro on my new Windows 8 pc. I have a flash8 licence and cd-rom. The F8 installation on the new pc is ok. But  how can I download the cs3 update that I bought and for rwhich  I have the licence. Thank you. Best re