Can't open 1712

I can't open Numbers. It shows : Can't open 1712

Remove the Numbers preferences files by:
1) Quit Numbers
2) in the Finder go to the preferences folder by:
  - selecting the menu item "Go > Go To Folder...
  - paste the path "~/Library/Preferences/ "
3) locate, and move, the following files to the trash (but do not empty):
com.apple.iWork.Numbers.LSSharedFileList.plist
com.apple.iWork.Numbers.plist
4) restart Numbers

Similar Messages

  • Photoshop can't open -1712

    I get this error when trying to open PS (it has worked just days before):
    "Photoshop can't open -1712"
    Why? How do I remedy this?

    Hi Migdphotog,
    1712 is apparently a "timeout" error, meaning that some program tried to do something, and it couldn't complete the task and so it "timed out". This would likely occur if you are trying to access some external resource that isn't available.
    Please try to boot in safe boot and log in to your original account in safe boot and then reboot the machine normally and check if the issue persists.
    Please refer to below article on how to boot in safe boot.
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Thank you for posting on Adobe Forums.

  • Hi my acrobat pro will not open, this is the error I get - "the application  Adobe acrobat pro can't open  -1712

    Hi my acrobat pro will not open, this is the error I get - "the application  Adobe acrobat pro can't open  -1712

    Hi Scott,
    1. What is the version of Acrobat and Operating System?
    2. Have you tried repairing the product? if not then Go to Help -> Repair Acrobat Installation.
    Regards,
    Anoop

  • HT3805 My Aperture 3 just crashed, i.e., it would not open and showed an error message -1712.  I sent the current version to trash and reinstalled from my A3 disk, but after installing again it still says "Aperture can not open -1712."

    My Aperture 3 just crashed...by that I mean it would not open and showed the message: "Aperture 3 cannot open.  -1712."  I have the latest A3 version and had been using it continually for 3 years.  This was the first crash.  And it will not open as often as I tried.
    I am using a 13" Macbook Pro with OSX 10.8.5.
    I tried sending the A3 application to trash, and reinstalling from my A3 disk.  Install message said "installation successful."  But A3 would still not open and gave same message with -1712.
    Any suggestions what I should do or try?
    Thanks

    Perhaps your Aperture library was damaged, when Aperture crashed. What where you doing, right before the crash happened?
    - If you installed new software - programs, plug-ins, preferences panels, check, if they are compatible.
    - If you imported new images, you may have imported corrupted files, that crash Aperture.
    Can Aperture launch correctly, when you try to open a new Aperture library?
    Hold down the options-key, when you launch Aperture and select to create a new library. Import a few images. Does that work?
    If Aperture will launch on a new Library, try to repair your current library. Hold down the key-combination option-command ⌥⌘  firmly while double-clicking the Aperture library to open in First Aid Mode. Hold the keys down, until the panel appears, and then try  the First Aid Options in turn.
    I have the latest A3 version
    Is it Aperture 3.4.5? The latest Aperture 3.5.1 will not work with Mt. Lion.

  • Just installed os x maverick and updated my version of pages now when I try to open a document stored in pages format from old version get message "The Application "pages" can't be opened -1712  What is wrong?

    Just updated to new version of pages.  Now can not open stored documents created under al pages.  Get message "the application pages can' be opened -1712"  hat do I do?

    Apple released Pages 5.0 to run on Maverics only. They completely rewrote the program for Maverics and 64 bit compatibility. They failed to explain that this version is missing much of the previous version's capability and that it cannot read older Pages files. When they install it they leave the older Pages 4.3 in place because it is the only way to read the older Pages files and upgrade them to a level that can be read by Pages 5!
    If you still have Pages 4.3 on your computer it will tell you what to do. If you do not then go into your backups and retrieve it.
    Because of the deficiences of Pages 5 I have removed it from my Mac and gone back to working with Pages 4.3. I have also removed Pages 2 from my iPad and found Pages 1.7 in the Time Machinew backups and brought it forward and droped it onto the iTunes icon to restore it and then synced the iPad to get the Pages 1.7 running again - it is compatible with Pages 4.3 on the Mac so all is back to normal for me.
    Apple say that they will fix many of the deficiences in Pages 5 in the next six months. I suggest you wait until then and keep an eye on these communities beforte considering the "upgrade".
    Incedentaly Pages 5.0 writes files that cannot be read by anything else including Pages 4.3 - better hope no one sends you one! It does not save RTF either - what where they thinking!

  • Can't open iphoto, showing a code -1712

    hello, have only just started using a mac, so please be kind x
    i can,t open i photo, have been using it fine, but today it wont open and shows the code -1712, can anybody please advise on what to do, i'm worried about losing all my images in there too, many thanks in advance x

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • My Numbers does not open anymore. a message says: number cannot be open -1712. what can I do?

    I am trying to open a Number document, but Number just cannot open again. A message error comes up saying: Number cannot be open -1712. error.
    What's the issue? How can I solve it?

    Have you tried quitting Numbers, then opening the app again?
    Also, you could try shutting down your Mac and restarting.
    If, after doing that, you still have problems, but only with one document, then that document may have become corrupted. In that case you could go back in time in Time Machine and "restore." 
    If you're saving your documents in iCloud you can still do a Time Machine restore at Library > Mobile Documents > com~apple~Numbers.  (To get there hold down the option key in Finder and choose Go from the menu).
    SG

  • Error Msg: "The application iTunes can't be opened. -1712"  How can I open the application?

    Error Msg:  "The application iTunes can't be opened.  -1712"  Spinning Wheel from ****!  How can I open this application?

    Try downloading and reinstalling iTunes.
    Does iTunes start normally in Safe Mode by holding down the Option and Command keys when starting iTunes?
    If it works normally, take a look at this Apple doc -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • Can't open Calendar- 1712 error message?

    Hi, All of a sudden I can't open Calendar on my MacBook. I get an error message "The application Calendar can't be opened. -1712" Calendar working fine on other synched devices though. Any ideas gratefully received. Thanks.

    I have exactly the same problem.

  • I can't open Lightroom 5 on my iMac -- receiving 1712 message

    I can't open Lightroom 5 on my iMac -- receiving 1712 message

    vOS X 10.9.4 (13E28)
    Error message “The application ‘Adobe Photoshop Lightroom 5’ can’t be opened -1712
    I’m thinking this might be an apple problem?
    Thanks,
    Julie

  • I get a message saying Word can't be opened -1712.  What's that mean and how do I fix it?

    iMac 3.06 GHz Intel Core 2 Duo
    550.05 GB free
    OS X 10.9.5
    Just tried to open a Word document and got a message that the application Microsoft Word can't be opened -1712.  What's that mean and how can I fix it?
    Thanks,
    Kelly

    If you haven't already done so, restart the computer and try again. If an application won't quit and prevents restarting, force quit. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up.

  • HT4807 anyone ever get this message? "The application Logic Pro can't be opened - 1712"

    anyone ever get this message? "The application Logic Pro can't be opened - 1712"

    More information please...
    What OS X are you running and what is the version of Logic...

  • I keep getting "The application QuickTime player can't be opened" -1712

    I just upgraded to Lion on Thursday, and now I can't open QuickTime. Whenever I try to, I get the message "The application QuickTime player can't be opened" -1712
    Any ideas?

    Same here. I never had to download Adobe Reader when I was using Snow Leopard in order to open PDF's - it's supposed to be a built in feature of OS X to be able to click and open any PDF. Now I have to go and use external software (that's supposed to be built in already into the OS X) in order to open my files. I think this is a bug that Apple needs to sort out asap.

  • The application "Dropbox - test" can't be opened -1712

    I created two additional dropbox applications though Automator and they have been working fine with no problem along with my own normal Dropbox application. I have them all set to open on start up along with Google Drive so that they appear in the top bar on my Macbook Pro. They are also in the sidebar on Finder.
    The problem i am having is that when i start up my Mac, my normal original Dropbox opens and syncs however the other two don't open. When i go to Applications and click on either of the two to open then i am getting the message - The application "Dropbox - test" can't be opened -1712.
    I have been reading about this online and went to the Activity Monitor and forced quit these and they show up in red when i search for them. But then i still have no luck in opening them. I have allowed Applications to be opened from Everywhere in the System Preferences - Security section too.
    Its very strange how i have had this working with no problems and then it suddenly stops.
    Any help or suggestions anyone can give would be really appreciated.
    Thanks!

    Where are you choosing to download the install files too?  What is the status of the download in the Adobe Support Advisor?

  • The application Microsoft Word can't be opened - 1712

    Now, suddenly, I cannot open it, or read/create any files, even though I can see the documents in my folders, and the light under the Icon is lit on the dock. When I open my Applications Folder, Word is shown as in there, but when I clicked on it, I saw the following pop up (error message?): The application Microsoft Word can't be opened - 1712. I have no idea how this happened, but I'm hoping that someone can tell me what to do about it. Any advice will be appreciated.

    You really should be asking this question on the MS Word forums.
    http://answers.microsoft.com/en-us/mac
    Suggest also that you tell us what version of Mac OS X you are running and what version of MS Word.

Maybe you are looking for