Can't open 5.5 files in version 8

I am trying to open a Captivate 5.5 project using Captivate 8. I get an error message. I am not able to use the dcache.zip file option as that gives me an error as well.

jerryfromtorrance wrote:
What version of GB is needed to open .band files created in GB for the iPad.
6.0.2
jerryfromtorrance wrote:
I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
the best you could do is export each track as an audio file from GBi and drop them into your GBX project

Similar Messages

  • Can't open old numbers files in version 3.5

    some old files can't be openen with the updated Numbers.
    Foutmelding:
    'index.numbers' kan niet worden geopend.'

    UPDATE & WORKAROUND:
    Ok, i found a way to at least see the spreadsheet. Change the file extension to .zip and it'll bring up a few files in Finder. Mine came up as INDEX. I was able to do a Quick Look on the file and it shows my spreadsheet.
    I'll have to re-enter the info into a new spreadsheet, but at least I was able to see my data.
    I'll be using Google Docs from now on. What a hassle?!

  • How can I open a cc2014 file in my cs6 version of Indesign ?

    How can I open a cc2014 file in my cs6 version of Indesign ?
    I have several files that has been saved in a cc2014 version and I can't open them in my CS6 version of Indesign.
    I don t have access to anyone who have the cc 2014 version to convert the file.
    How can I do it from my cs6 version?
    THANKS!

    You can't do it from CS6.
    You have to export to IDML from InDesign CC2014 (or whatever the version it was created in) and then open the IDML in the earlier versoin of InDesign.
    All explained in the FAQ on the main forum page.

  • I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    Thank you for your valuable advice. I've solved the problem right now.
    Thanks
    2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
        I have Photoshop CS 5.5 version, but I've just changed my camera and
    I can't open my raw files. I need for my new camera Photoshop CC and Camera
    Raw 8.7 version. How can I do to update the old version? Thank you
    created by c.pfaffenbichler
    <https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
    Discussion* - View the full discussion
    <https://forums.adobe.com/message/7302535#7302535>

  • I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

    I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
    more info:
    Photoshop never crashed or anything.
    I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
    The file size was appox. 1giga
    Thanks a lot

    The problem was saving over the network. Working across a network is not supported.
    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • I' can't open images or files with trial version of Photoshop cc

    I' can't open images or files with trial version of Photoshop cc. Photoshop starts, it seems ok, but don't work.
    Illustrator cc works very well. Why?

    1. I open Photoshop cc Trial version
    2. I click "continues with the trial version" (in italian version)
    3. File>Open> psd (cs5) or jpeg files
    I can't even open a new document. (File>New> etc..)
    All files can be opened by Paint, Ilustrator etcc.  Only Photoshop doesn't work.
    I just see this

  • I recently downloaded the latest version of SnowLeopard and now I can't open any pdf files. Has anyone else had this problem?

    I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.

    See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    tt2

  • Can't open my old files in garageband 9, required new version

    hello macusers!
    i.ve created some garageband files last month with garageband, i suppose was garageband 9! But my macbook had to be cleaned and I had to reinstall mac os x and all ilife 09 applications ,including garageband! Now I can't open some certain files i've created, it tells I should upgrade my Garageband to a newer version, but the newer version is with the ilife 11, which I've never used! Can someone tell me a way to open these certain files? (other files opened, but was created in the same time with the same garageband...  
    thanks a lot!!!

    Have you run Software Update since the ReInstalll...
    Maybe you just need the Latest Version of GB for iLife 09...

  • I can't open my pdf files with adobe reader  because I get a message that saysThere was a RAISE with

    i can't open my pdf files because i get a message that saysThere was a RAISE without a handler. The application will now exit.

    What is your operating system?  Reader version?

  • I can't open a PDF file with password with my iphone app

    I can't open a PDF file with password with my iphone app, the app send me an error, but the password is correct. This only happend in the new version of iphone. In the latest version I didn't have this problems.

    Can you please share the file with us at [email protected]? Also, can you please confirm that you are viewing the PDF in the Adobe Reader app rather than an app like dropbox, Mail or Safari?

  • I can't open my pdf files with adobe reader, adobe is not default

    I can't open my pdf file and when i select default program nothing happens, I try repair adobe reader, I try reinstall it, I installed older version, i try fix default programs but when I select my adobe reader nothing happens, there is still only windows media player (he is set as default). Please help me. I am already try all of those steps http://helpx.adobe.com/acrobat/kb/cant-open-pdf.html

    If Reader ISN'T in the list of prpgrams to open with, click "Browse"
    In the "Browse window" go to C/Program files [or Program Files (x86)]/Adobe/Reader 11/Reader
    Select "AcroRd32.exe" and click "Open"
    Make sure "Always use the selected program to open this kind of file" is checked and click "OK".

  • Can't open NEF raw files in Elements 12.1 from my Nikon D610.

    I have the trial version of Elements 12 and updateed to 12.1. The Camera Raw version is 8.4 and I'm running a Windows 7 computer. Then I try to open NEF files do I get the error message that my Camera is not supported. I tried to install the DNG converter ver 8.3 but that dosen't recognize the NEF files either. Elements opens the NEF files from my Nikon D5100 without problems and so does the DNG converter. I have tried both 12 bit and 14 bit NEF files from the D610 with no luck.
    As I understand it so should Elements 12 with Camera Raw 8.4 support Nikon D610. I hope I get get this to work so that I can update to ver 12 from ver 9 that I use today.
    Best regards
    Daniel

    Yes I used Nikon Transfer NX that came with my Nikon D5100. I downloaded the NEF file directly from the SD card to my hard drive and now can I open the NEF file in Elements. I guess I need to update Nikon Transfer NX with the version I got with the D610.
    Thanks 99jon for the quick reply and for solving my problem
    //Daniel

  • You can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use the latest version of iphoto

    you can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use latest version of iphoto. iphoto 11 is installed.

    This is a message you got?
    If so, as your post isn't clear, it may be a bogus message caused by a corrupt database.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Can we open Solidworks 2009 files with Acrobat 9 pro extended

    Hello,
    I'm testing Acrobat 9.0.0 Pro extended and I can not open Solidworks 2009 files. But I can open Solidworks 2007 files. I'm on Windows XP 64 bits.
    Can you tell me if this feature is corrected in newer version as 9.1 and later?
    Or any other solution to be able to open the Solidworks 2009 files directly in Acrobat (without the need to open solidworks to convert the files into pdf 3D)?
    Thanks for your help.

    Yes, you can convert 2010 SolidWorks file to STEP or PARASOLID files sometimes
    you loose some informations during those conversions then you can read those files into Acrobat then sometimes you
    can loose more informations... Why Adobe doesn't update some CAD formats what's append ???
    In the first post nobody whan't to answer to my question ... why ???
    Is-it an Adobe forum ???

  • Can't open fcp project file - fcp not responding

    starts to open project but gets to 23% and freezes fcp...project is being stored on a lacie 250gig protable hd with firewire. never had this issue after tons of work. tried going to a autosave version but tried several and they freeze up fcp
    any ideas short of moving all the media to another drive and starting a new project (I was just about to start cutting this project today).

    Welcome to the forum!
    Post the version of FCP you're running.
    Try opening a new project file, then importing the captured clips into it... might fix this... If you trash your preferences for FCP found in the user/library/preferences/FCP User data folder, you can just click on the application and it won't try to open the last project file.
    Can you open earlier project files OK?
    Jerry

Maybe you are looking for