Can't open a data-rescue found file in I movie

I mistakenly trashed an IMovie file and I have purchased data rescue which has found 36 previously trashed files. When I try to open the file in IMovie (they were created in I movie) they won't open, it doesn't recognized the file type etc. Does anyone have any suggestions? Dr. Steve. I Movie 4.0.1 and data rescue II

Try my file fixers:
http://www.berga.nu/%7Eusrlt/imovie/index.html

Similar Messages

  • How can i open a DOC or TXT file and insert the data into table?

    How can i open a DOC or TXT file and insert the data into table?
    I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
    I'd like open DOC file and I'd like insert them into the table with same columns.
    Thanks.

    Use the SQL*Loader utility or the UTL_FILE package.

  • How many databases can be opened simultaneously in a single file?

    To all:
    I don't known how many databases can be opened simultaneously in a single file. After my application open 499 databases in a single file simultaneously, DB->open return error 12.(can not allocate memory ?).
    How can i do ? Thanks.

    I found it:
    Berkeley DB Reference Guide:
    Locking Subsystem
         PrevRefNext
    Configuring locking: sizing the system
    The lock system is sized using the following three methods:
    DB_ENV->set_lk_max_locks
    DB_ENV->set_lk_max_lockers
    DB_ENV->set_lk_max_objects
    The DB_ENV->set_lk_max_locks, DB_ENV->set_lk_max_lockers, and DB_ENV->set_lk_max_objects methods specify the maximum number of locks, lockers, and locked objects supported by the lock subsystem, respectively. The maximum number of locks is the number of locks that can be simultaneously requested in the system. The maximum number of lockers is the number of lockers that can simultaneously request locks in the system. The maximum number of lock objects is the number of objects that can simultaneously be locked in the system. Selecting appropriate values requires an understanding of your application and its databases. If the values are too small, requests for locks in an application will fail. If the values are too large, the locking subsystem will consume more resources than is necessary. It is better to err in the direction of allocating too many locks, lockers, and objects because increasing the number of locks does not require large amounts of additional resources. The default values are 1000 of each type of object.
    When configuring a Berkeley DB Concurrent Data Store application, the number of lock objects needed is two per open database (one for the database lock, and one for the cursor lock when the DB_CDB_ALLDB option is not specified). The number of locks needed is one per open database handle plus one per simultaneous cursor or non-cursor operation.
    Configuring a Berkeley DB Transactional Data Store application is more complicated. The recommended algorithm for selecting the maximum number of locks, lockers, and lock objects is to run the application under stressful conditions and then review the lock system's statistics to determine the maximum number of locks, lockers, and lock objects that were used. Then, double these values for safety. However, in some large applications, finer granularity of control is necessary in order to minimize the size of the Lock subsystem.
    The maximum number of lockers can be estimated as follows:
    * If the database environment is using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors open database handles to the number of simultaneously active transactions and child transactions (where a child transaction is active until it commits or aborts, not until its parent commits or aborts).
    * If the database environment is not using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors and open database handles to the number of simultaneous non-cursor operations.
    The maximum number of lock objects needed for a single database operation can be estimated as follows:
    * For Btree and Recno access methods, you will need one lock object per level of the database tree, at a minimum. (Unless keys are quite large with respect to the page size, neither Recno nor Btree database trees should ever be deeper than five levels.) Then, you will need one lock object for each leaf page of the database tree that will be simultaneously accessed.
    * For the Queue access method, you will need one lock object per record that is simultaneously accessed. To this, add one lock object per page that will be simultaneously accessed. (Because the Queue access method uses fixed-length records and the database page size is known, it is possible to calculate the number of pages -- and, therefore, the lock objects -- required.) Deleted records skipped by a DB_NEXT or DB_PREV operation do not require a separate lock object. Further, if your application is using transactions, no database operation will ever use more than three lock objects at any time.
    * For the Hash access method, you only need a single lock object.
    For all access methods, you should then add an additional lock object per database for the database's metadata page.
    Note that transactions accumulate locks over the transaction lifetime, and the lock objects required by a single transaction is the total lock objects required by all of the database operations in the transaction. However, a database page (or record, in the case of the Queue access method), that is accessed multiple times within a transaction only requires a single lock object for the entire transaction.
    The maximum number of locks required by an application cannot be easily estimated. It is possible to calculate a maximum number of locks by multiplying the maximum number of lockers, times the maximum number of lock objects, times two (two for the two possible lock modes for each object, read and write). However, this is a pessimal value, and real applications are unlikely to actually need that many locks. Reviewing the Lock subsystem statistics is the best way to determine this value.
    I created DB_CONFIG file, and add three lines:
    set_lk_max_locks 20000
    set_lk_max_lockers 20000
    set_lk_max_objects 20000
    As the default values are 1000 of each type of object, my applicaton open 499 database(except internal database) simultaneously(CDB modal) . After changed parameters, my application opend above 6000 database.

  • In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

    In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to Firefox 4 (beta)

    Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
    You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

  • Error : Can't open local data port

    Hello:
    I�d like present this problem to yours:
    I am executing two files Client/Server into my own PC, using two DOS console different, this one to Client an another to Server.
    I got this error:
    Output of the CLient (DOS Console of the client)
    C:\RUN\EX14>java AVReceive2 1.1.9.147/45300
    - Open RTP session for: addr: 1.1.9.147 port: 45300 ttl: 1
    - Waiting for RTP data to arrive...
    - Waiting for RTP data to arrive...
    - A new participant had just joined: mpalacios@mpv
    - Waiting for RTP data to arrive...
    - Waiting for RTP data to arrive...
    Output of the Server (DOS Console of the Server)
    C:\RUN\EX14>java AVTransmit2 file:/c:/run/format/au/drip.au 1.1.9.147 45300
    Track 0 is set to transmit as:
    ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits
    Error : Can't open local data port: 45300
    Well, 1.1.9.147 is the IP address of my PC.
    So, What�s the problem?
    If you need of the rest of code, please say me.
    Thanks.
    Angel.

    Well, I am agree with you, but I have this code in the Transmit File (Server):
    * Use the RTPManager API to create sessions for each media track of the processor.
    private String createTransmitter() {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
    //The local session address will be created on the
    // same port as the the target port. This is necessary
    // if you use AVTransmit2 in conjunction with JMStudio.
    // JMStudio assumes - in a unicast session - that the
    // transmitter transmits from the same port it is receiving
    // on and sends RTCP Receiver Reports back to this port of
    // the transmitting host.
              port = portBase + 2*i;
              ipAddr = InetAddress.getByName(ipAddress);
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                       port);
              destAddr = new SessionAddress( ipAddr,
                                  port);
              rtpMgrs.initialize( localAddr);
              rtpMgrs[i].addTarget( destAddr);
              System.err.println( "Created RTP session: " + ipAddress + " " + port);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              return e.getMessage();
         return null;
    When I use this Files (Client/Server), between diffrent PCs into LAN, eg, Client (One PC) and Server (Another PC), but I used:
    This One PC: (IP Address PC = 1.1.9.150)
    C:\run\ex14\java AVTransmit2 file:/c:/run/format/audrip.au 1.1.9.147 45300
    Another PC:(IP Address PC = 1.1.9.147)
    C:\run\ex14\java AVReceive2 1.1.9.147/45300
    That�s work right!
    So, what�s happen?

  • HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

    Hai Frnds,
    i Attend an interview they asked this questions can u know the answeres . tell me .
    In File to file scenario how can we reprocess records which failed records.
    HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
    Thanks in advance
    thahir

    Hi,
    Refer these links:
    this might help you
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    validating against schema file for the output XML file
    Informing the sender about bad records
    Regards,
    Nithiyanandam

  • How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader?

    How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader?  Get error "There was an error opening this document. Access denied".  Disabling Protected Mode in Reader doesn’t always work.
    McAfee: https://kc.mcafee.com/corporate/index?page=content&id=KB74299&actp=search&viewlocale=en_US &searchid=1240943327683

    If Reader ISN'T in the list of prpgrams to open with, click "Browse"
    In the "Browse window" go to C/Program files [or Program Files (x86)]/Adobe/Reader 11/Reader
    Select "AcroRd32.exe" and click "Open"
    Make sure "Always use the selected program to open this kind of file" is checked and click "OK".

  • I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    Dear Ones,
    I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

    see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard

    hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard
    your prompt reply will be appreciated
    thanks

    Reinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
    You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
    If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
    In the MAS, hold option and click Purchases to redownload Lion
    FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
    See this for more info
    https://discussions.apple.com/docs/DOC-3046

  • QuickTime Player7 can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.  How can i do to open movie file? on OS X 10.10.2

    i just tried to open video file on youtube. but it shown "can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.   How can i solve this issue?

    i just tried to open video file on youtube. but it shown "can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.   How can i solve this issue?
    In what file type and compression format did you download the YouTube content? I.e., to avoid such issues, you would normally download the source files as content that is natively compatible with your target player or convert incompatible file type/compression format combinations to files that are compatible with your targeted media player.

  • I can't open a 32-bit HDR file made with Photoshop HDR in Lightroom.

    I can't open a 32-bit HDR file made with Photoshop HDR. I saved the file in Photoshop with the maximum compatibility-option on. In Lightroom the file doesn't show a preview and an exclamation mark in the upper right corner. Anybody an idea why and how to solve this problem?

    As I said, the files must be saved in TIFF format in order for LR to recognize them.
    Here's a video tutorial I've recorded explaining the workflow: Tonemap 32 bit images in Lightroom 5
    mh++

  • In Photoshop CS5 I have updated my raw-update that was suggested by my updatebutton in my photoshop. But I still can not open my new camera srw-files from my samsung nx300.

    In Photoshop CS5 I have updated my raw-update that was suggested by my updatebutton in my photoshop. But I still can not open my new camera srw-files from my samsung nx300.

    You cannot open Raw files from the Samsung NX300 in CS5.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    You need Adobe Camera Raw 7.4 or later which is only compatible with CS6 or later.
    Some choices:
    Upgrade to CS6
    Join the Cloud
    Join the CCPP
    Free option: download the free Adobe DNG converter, convert all Raw files from the NX300 to DNGs then edit the DNGs in CS5
    Photoshop Help | Digital Negative (DNG)

  • How can i open a raw nikon D300s file in photoshop 7.0.1? [was: rescueranch]

    How can i open a raw nikon D300s file in photoshop 7.0.1?

    The D300s was first supported in Camera Raw 5.5
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw 5.5 is only compatible with Photoshop CS4 and later
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your options:
    Join the Cloud, or
    Buy CS6, or
    Convert the Raw files from the D300s to DNGs using Adobe's free DNG converter
    http://www.adobe.com/products/photoshop/extend.displayTab2.html
    Then edit the DNGs in Photoshop 7.0.1

  • Logic Pro 9.0.0 can't open GarageBand 6.0.4 files

    As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.

    queequeg731 wrote:
    As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.
    If you upgraded Logic to the latest version (9.1.4) you might be able to open them, in fact I think you can. Garageband is a subset of Logic, so the message you're seeing in Logic is correct.
    pancenter-

  • TS3276 When I receive email attachments on my iMac saved as "docx", I can't open them, i.e. the file is empty when I open it.  On my iPad I can open them.  Why?

    When I receive email attachments on my iMac saved as "docx", I can't open them, i.e. the file is empty when I open it.  On my iPad I can open them.  Why?

    I can't open them without buying software when the same emails on my iPhone have the attachment as a PDF and open?  Thanks
    Acrobat PDF files open with Preview which is already installed on the Mac.

Maybe you are looking for