Can't open a "Full Page" to print a letter..Please help!...

For some strange reason, when I open up AppleWorks (Word Processing) to simply print a letter, I get a "half a page". And in the past it was always a "Full Page"... I'm using AppleWorks 6.2.9
I've tried everything possible, but I still get the "half page" each and every time when I open Word Processing to write a letter.
Please help.......thanks.....

Without you detailing what you've tried, it's impossible to know what you consider everything possible. Usually a user's "everything possible" isn't everything.
When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the free reset function of Dale Gillard's Sidekick.

Similar Messages

My i pod touch screen is very slow and can't open the full page to close the voice over

my ipod4 touch sceen very slow and i can't open the full page can't scrow to close the voice over

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I open March 2013 in my iPad-calendar? please help me! Thanks

How can I Open March 2013 in my iPad-calendar?
Please help me!
Thanks
Susanne Schabel

I get same Issue.
is iCloud make this issue.
Try Disable iCloud calender on you iPad and then go to March 2013 on you calender and then it not crash. after that go back and enable iCloud calender again.
And then it work for me :-)
best regards
Lars Rasmussen

I can not run the account Administrator show me this letter Please help :

I can not run the account Administrator show me this letter Please help
http://im40.gulfup.com/4AXHK.png

Hi,
You need the administrator permission to enable the built-in administrator account.
For secure concern, there is no other way to do this.
Alex Zhao
TechNet Community Support

IBooks author: Can't open the file because "index.xml" is missing, please help!,

A project that I was working on yesterday and I didn't close it, today when I wanted to work on it and opened a new page there was a huge X on the page so I decided to quit ibooks then reopen it, saved all my changes first of course, but then when I tried opening it literally 10 seconds later it says the index.xml file is missing, this is my technology project due tomorrow please help!

This or a simmilar problems arose just after the last iBA update. There is a very long thread dealing with this.
I had a similar problems and nothing cured it until I contacted support and they gave me a link to upload to their server, they repaired my file and I downloaded it.
It actually took from start to finish about 2 weeks.
I "huge X" on any page usually indicates an image or similar content is missing.
The usual suggestions are to close everything down and do a re-boot.
I suggest a search of this forum for the thread may be an idea. Try this
https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=false&q=index.xml+file+is+missing
If you make a copy of your book file and change .iba to .zip, you can open the file and check if the index page really is missing.

Can't open Security & Privacy preference pane?...please help.

Hi All,
I would be grateful if anyone could assist... I can't seem to open the security & privacy preference pane. I receive the following "Preferences Error" upon trying to click the icon in my system preferences:
First click: You can’t open Security & Privacy preferences because it doesn’t work on an Intel-based Mac.
Second click: Could not load Security & Privacy preference pane.
I noticed the issue this past week when I installed some monitor callibration software. After downloading, the software's interface text did not load (it was simply blank for the drop down menus). The manufacturer tried to help me by clearing font cache and such, but that was not the issue. When he next directed me to the S&P pane, that's when I noticed I couldn't open it to adjust anything.
* I did go into Users & Groups and created a new admin user. I was then able to open the Security & Privacy pane, and load the monitor calibration software without any problems, so it seems to be a user issue I suppose? Tried to trash some security preferences, reinstalled 10.8.2, but with no luck.
Thanks for your assistance!

Try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This does some maintenance routines and 3rd party applications don't load. Sometimes 3rd party applications are the problem. If your normal user account works in Safe Mode, it is probably a 3rd part application.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Can't open IDML files on CS6 or 5.5 Please help

I just purchased and downloaded IDCS6. I have updated all the plugins. I "saved as" IDCS4 or old, a document I was working on. Now I can't open with either version of ID. Please help! How can I get this document to open? I am using Windows, 64-bit OS

I received the .idml fileyou sent, and it won't open here, either. It looks to me as if it may not be complete. Since you didn't send the .indd file I can't do much more.
I see though that you managed to get the file to export properly. In spite of it being listed now under the Save As menu, making .idml files is an Export function and it is a background task so even though the dialog closes and you can go back to work immediately, the file may not be ready. There is a samll inidcator icon of scrolling horizontal lines that appears on the right of the Menu bar while background tasks are in progress, and you can open the Background Tasks panel from Window > Utilities for a real progress bar. I suspect you may have simply tried to open the original .idml file before it completed.
As far as opeing as Untitled, that unfortuantely, is expected behavior, and it is a pain in the neck. You are creating a new file as far as ID is concerned, so it names it Untitled. When you save, you should probably use a new name to avoid overwriting the original .indd file.

I can't open The Apple Store on my laptop. Please help

I can't open Apple Store on my iPad. I've tried everything. Please help!

Hello Robinalves
Check out the article below to troubleshoot your access to the Apple Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

Can't open numbers document on mac!! Urgent please help

Ok so i have a macbook air mid 2012. I had to reset my laptop the other day and since then i cannot open my urgent numbers document. I need this very soon so if anyone has any idea of whats going on please help!!! When i try to open it it tells me that the document is empty or that i need to purchase it again. But i have already purchased it. I moved it to trash as well then cleared it then downloaded it again but no luck!
Thanks in Advance

Hi Salves,
Perhaps you now have two versions of Numbers on your machine, Numbers 2.3 (Numbers '09) and the latest version of Numbers (Numbers 3.2).
The icon on your Dock may still be pointing to Numbers 2.3 (the old version). That will not open a document that has been converted to the new version (Numbers 3.2).
Look in your Applications folder (inside a sub-folder called iWork '09) for Numbers 2.3. Do not delete this app!
Look inside your Applications folder (not a sub-folder) for Numbers. That may be Numbers 3.2 (the latest version). Drag that to your Dock.
Your Dock may now look like this:
Numbers 2.3 on the left (3 column chart);
Numbers 3.2 on the right (4 column chart).
Wayne Contello has written a User Tip for working with the old and new versions of iWork.
https://discussions.apple.com/docs/DOC-6991
Regards,
Ian.

Can't open songs once transferred to new computer. Please help!

Hello
I followed the helpful advice on these boards and used an external hard drive to transfer my iTunes library from an old PC to an new one. My problem now is I see the songs the songs in my music folder but it seems that I would have to import them one at a time to get them into my new library. There has got to be an easier way that I am missing. Thanks in advance for your help.

I have a similar problem.
I removed and re-installed Itunes and Ipod software as per the Apple site recommendations because my ipod would not connect to itunes. I re-installed both software, opened itunes and had no library at all showing and my view config was all defaults. I copied and renamed the "itunes library xxx-xx-xx.itl" file from the previous library folder in my music back and it restored my library and playlists (yeah!).
My problem is that many (25 to 30%) of my 10,000+ songs have an exclamation point next to them and the library can't find them. It can find the rest of the songs (including some but not all songs in the same CD's). All of the songs are in the same folder tree on an external usb hard drive. I can manually locate and connect the songs but this would take 100 years to do. I tried to consolodate the library but this did not help. Any suggestions?
Thanks,
Greg Florio
[email protected]
Dell inspiron 9200 Windows XP Pro music library on external drive

Can't open packets in Wireshark from Cisco IME. Please Help.

Hello,
I am using the Cisco IME with a 4240 IPS. I am unable to "trigger" packet or open any of the packets in wireshark when I'm looking at an event. The little Wireshark button on the bottom right corner is just grayed out. Can anyone possibly help? Thank you in advance.

Are you using the latest IME version?
Have you tested this from a compute with a different OS?

I can't open my call history at all!! Please help...

FOr the past 4 months, my Iphone 4 cant open the call history.. I dont know how it happened.. please if anyone knows how to troubleshoot my problem, kindly reply.. Your help will be deeply appreciated.. thanks in advance..

I have not heard back so I am not sure if I referenced the thread correctly when i last sent the muse file. I used the url https://forums.adobe.com/message/7212679 but I see in this email below it is referred to as https://forums.adobe.com/message/7213601#7213601
I attached it as a zip archive in my last email. I have also posted it to dropbox (unzipped) at https://www.dropbox.com/s/30vna0yqacvokvw/LKFdotcom%20v3.muse?dl=0
Any help would be greatly appreciated.
Thanks,
— David
David E. Frith | DEF Design
860.985.4471
[email protected]

HT201263 i tried restoring my OS through iTunes but there is error 1669 and I can't open it anymore. what will I do? please help... i'm in great trouble.

i tried restoring my firmware through itunes but it say "it cannot be restored there is an error 1669 occured" what should I do? please help. my ipnone 5s bought a month ago is not working anymore...

https://discussions.apple.com/thread/5564260?tstart=0
https://discussions.apple.com/message/23593048#23593048
https://discussions.apple.com/message/23565797#23565797

Can i download java for my ipad, the problem is i open glovis.usgs from my ipad, but i can't see the full page, cause the page need a java...help me please

Can i download java for my ipad, the problem is i open glovis.usgs from my ipad, but i can't see the full page, cause the page need a java...help me please

Nope. The iPad (and iPhone and iPod touch) cannot execute Java applets. It's a limitation in iOS from the beginning (just like lack of Flash). You will either need to use a desktop computer or access a desktop computer via RDP or VNC to access that page on iPad.mIn short: there is no native way to use a Java applet on iOS.

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it?

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it? This is particularly aggravating when the new page has music or a voice message that intrudes even when I am not looking at the page.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can't open a "Full Page" to print a letter..Please help!...

Similar Messages

Maybe you are looking for