Can't open a password encrypted file on my iMac using Adobe X ?

!

The password is just four numbers. No hyphen. When I enter it, I get the message om the left.
My iMac is running Yosemite 10.10.2.

Similar Messages

  • Can not  open  a  password protected file from OSX2.8 in OSX4.x

    I have a few files that I password protected in OSX2.8 that will not open now in OSX 4.6. The are not part of the vault type protection. It seems that the feature of individually password protecting files in the earlier OSX system do not open, nor give the option to even give the password. In the get info window there is no option to change or type in the password. The password is not related to the administrator password and it seems that it was a feature that did not follow through to the later OSX version. The only alternative I can think of is to install OSX 2 on an external and hope it gives me the option.
    Does anyone know how to deal with this type of individually protected file in OSX 4.6? I have tried the vault, and the get info, but nothing seems to work to even give me the option to enter a password for an individual file. They are jpeg, and QuickTime, and Photoshop .psd files.
    Any ideas?
    Thanks

    Then it's probably not 100%-compatible with the PDF security standard. You
    should post this question on an iText forum.

  • Will Adobe Premiere Pro CS6 open the .prel edit files I've made using Adobe Premiere Elements 11?

    Can't find an answer to this, help would be appreciated!

    I don't dispute Ann's answer, but if you have CS6, make a copy of the project and try it.

  • I can't open a silverlight dmg file-it always opens Terminal window

    Hi,  I can't open a silverlight dmg file to watch netflix.  I am running Lion on my 2.66ghz iMac i5 with 10.7.3. I can download and install silverlight but when I try to open the file, it always opens the Terminal window.  Please Help.

    It sounds like all your launch services file associations have somehow been corrupted.  I suggest your reset the launch services bake to their initial default settings.
    The easiest way for you to do this is probably to get a maintenence utility like OnyX (download the Lion version for your case).  It has, among many other things, a way to rebuild the launch services.  Launch OnyX.  It will ask for your admin password and a window like below will be dispallyed.
    As you can see from the above picture in OnyX you select Maintenance, Rebuild tab, check the LaunchServices checkbox, and click the Execute button (not shown here but it's at the bottom of the window).
    Note, the above shows the window for the Snow Leopard version of OnyX.  I don't know if the Lion version is different since I don't use Lion.

  • I have downloaded trial for Windows English version, but can't open the Captivate_8_LS21.7z file. I have 32-bit. Will this work or shoudl I redownload?

    I have downloaded trial for Windows English version 1.45GB.
    It has downloaded but I can't open the Captivate_8_LS21.7z file.
    I have 32-bit. Will this work ?

    Hi There,
    In order to download / install Captivate 8 32 bit, you have to download 2 files ( .7z and .exe ) at same location/ folder.
    Once both files downloaded completely then you have to run .exe file and it will extract .7z file first and then it will initialize the installer. You do not have to open .7z file.
    Let me provide you the download links of Captivate 8 32 bit :-
    Open the link mention below in any Web Browser say Internet Explorer
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
    Sign in with your Adobe id and Password, then you will be redirected to download Web Page of Captivate 8. 
    Do not click on Download. Kindly let that window open as it is.
    Now Copy and paste the link mention below in the new tab/window of the same Web Browser in which you have opened the above link.
    http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.7z
    Then Save the file.
    Do the same for the link mention below and save this .exe file as well.
    http://trials3.adobe.com/AdobeProducts/CPTV/8/win32/Captivate_8_LS21.exe
    Make sure both the files (.7z and .exe) save/download at the same location/folder.
    NOTE: Wait for both the files to finish download and then run the .exe file.
    Once you run the .exe, it will start extracting the .7z file and will provide Captivate 8 folder on your desktop which will contain setup.exe. Run this setup.exe to install Captivate 8.
    Regards,
    Ajit

  • Can't open dmg or zip files

    I have Yosemite, and recently installed the latest system update for this.
    I've noticed today that I can't open dmg or zip files - attempting to do this via the 'open with' command results in the icon for (eg disk utility) appearing in the dock and hanging.
    I can mount via Disk Utility - though I'm having issues opening the resulting mounted applications as these then also appear in the dock and hang. Haven't found a way to open zip files yet.
    I have tried repairing permissions and disk - with no effect. Restarting the finder also has no effect.
    Anybody have any ideas what could cause this (these seem like basic functions) or any troubleshooting steps?
    Many thanks!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HT1578 Can I open the password protected disc on another computer  running Windows?

    If I make a protected disc on my Mac, can I open the password protected disc on a computer  running Windows?

    If you mean the drive is encrypted with FileVault, then I very seriously doubt it.

  • Hello all.   Hope someone can help me. I recently downloaded some  updates for my imac.  Since doing this the computer starts up but I get no logon box.  The home screen opens but I can't open any programs or files. I've tried rebooting, no joy. Help!!

    Hello all..   I hope someone here can help.  I recently downloaded some updates to my imac.  Since then the computer starts but I get the home screen opening without the logon box.    I can't open any programs or files and if I click on the Safari tab it disappears from the dock.  I've tried rebooting with no joy.
    I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
    and the computer seemed fine but now the problem has reappeared.  Is there a way to removed downloaded updates from the computer or revert it to an earlier state?   Sorry for the long question. Hopefully one of you clever people can help.   Simon

    Clntxwhtby wrote:
    Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
    I have a hard drive icon on my desktop that says 10.6.2....
    I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
    It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ?

  • Sorry! Something went wrong - I can't open my icloud pages file anymore

    I can't open my icloud pages file anymore. We are two collaborators working on it and she told me the file was freezing. I have said she can reload the file but it didn't work. Then it was my turn. I have tried from desktop but also from Ipad. The Pages app now crash when I want to open this same file. When I load my icloud page, I see the file, it is here, with the last layout, but can't open. I need to recover that document, it's important to me. Is there any assistance @apple to do so?
    Many thanks!

    I have exactly the same issue !! On "Pages", "Numbers", "Keynote"
    - Macbook pro retina 13" late 2013
    Icloud.com tested with Chrome, Opera, Safari, Iexplorer .. same problem
    Try to reset  "Documents and data" from Settings >>> "Could not reset Documents and Data ; there was a problem.."

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

    I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

    Camera Raw plug-in | Supported cameras  I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

  • How can i open a downloaded mp4 file that is zipped?  Witch will not open.   And, Convert that mp4 to play on my iMac with Maverick osx ?   I there an app or apps i need to buy ?

    how can i open a downloaded mp4 file that is zipped?  Witch will not open.   And, Convert that mp4 to play on my iMac with Maverick osx ?   I there an app or apps i need to buy ?

    You should be able to open the zipped file by double clicking on it.
    http://www.videolan.org/vlc/index.html
    This link is for a VLC Player it can play just about everything.
    Cheers
    Don

  • When in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I updated  Adobe Reader)

    when in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I already updated  Adobe Reader)

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • How can I open and print PDF files?

    How can I open and print PDF files?

    With the free Reader if they are not print protected. With Acrobat otherwise.

Maybe you are looking for