Can't open a Program from Classic

I have a G4 Silver and I booted up in system 10.3.6. I opened Classic and then tried to Open Quark and I got an error that read "Failed to Launch Quark Contextual Menu failed" so I can't start up my Quark 5.0. I tried to reload the program that didn't work. Is there something I can do, so I can start my program? Do I have to delete a contextual menu or preferences? PLEASE HELP!!!

Similar Messages

HT1438 i can't open some programs from my ipad anymore

i can't open some programs from my ipad anymore, not even the general setting; and i can't update to higher version of the softwear, currently it's 5.1.1.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Satellite A60: Can't open any programs from the CD Rom

I have a problem when trying to open any program from the CD rom, the computer runs a Windows Explorer message every time
which says there is a fault and has to close down. I have run the computer through every virus program going and i have all the Microsoft updates from there website. Has anyone got any further ideas what the problem could be.

Hi
Well, strange issue. Maybe its something wrong with the CD rom?
The best idea is to recover this unit with the delivered Recovery CD but firstly you can try to remove the CD rom device from the Device Manager. After OS booting the drive will be recognized again. If the problem persists after this procedure I would recommend to recover the unit.
Bye

Can't open the program from the desktop icon.

I've got LR 5.3, and PS CC. This is a new LR install. I'm trying to import from an SD card, and when I hit the LR desktop icon for the app, I get a small window asking me to "CHoose a Different Catalogue" or "Create a New Cataloague. The "Open" button is greyed-out. The large "Select a recent catalogue" window is empty. When I go the the SD card under my computer, all I can do is open it to a folder containing the images, and the only option is "Save", not "Open". But nothing happens when I hit the Save button. What has happened? __________________

If this a new install I am assuming that there is not a catalog yet.
Why don't you 'Create a New Catalog' and call it whatever your fancy is.
You may then find that you will be able to import some images.
Unfortunately, Lightroom cannot operate in a vacuum - no importing without first having a catalog.
If there is another issue at play feel free to enlarge.
Tony Jay

I have transferres Adobe programs from my old Mac Book to my new Mac Book Pro, but I can´t open the programs!?

I have transferres Adobe programs from my old Mac Book to my new Mac Book Pro, but I can´t open the programs!?

Adobe programs don't do well with migration. You should uninstall them, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3), and reinstall from the original installers, but you also need to be aware that many older programs are not supported on newer versions of OSX so this may not go smoothly.

Vista-switched from Explorer to FF 3.6- can't download versions/updates like Adobe Flash-error message: INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FF IS CLOSED-Most pics blocked on sites/programs-can't open some programs that Explorer opens- Help?

I have Vista, recently switched from Internet Explorer to FireFox 3.6-. Since switching over, it can't download alot of versions/updates like Adobe Flash: It error messages: "INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FIREFFOX IS CLOSED".
Most pics blocked on sites/programs. I can't open some programs that Explorer opens. I would sure appreciate any help!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Hello all.   Hope someone can help me. I recently downloaded some updates for my imac. Since doing this the computer starts up but I get no logon box. The home screen opens but I can't open any programs or files. I've tried rebooting, no joy. Help!!

Hello all..   I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box.    I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state?   Sorry for the long question. Hopefully one of you clever people can help.   Simon

Clntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ?

How can I open raw files from my Nikon D7100 in CS4 or CS5?

How can I open raw files from my Nikon D7100 in CS4 or CS5?

Andy,
In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
Upgrade the host program version
Use another host program, such as PsElements or Lightroom
Use the free DNG converter, per Curt's suggestion. That is not host program dependent
Glad that the DNG Converter works for you.
Good luck,
Hunt

Can't open INDD files from Bridge or Windows Explorer

I upgraded from CS2 to CS4 in Jan 2009, but didn't uninstall CS2 until yesterday because the program file sizes seemed weird: CS4 was listed as less than 6Mb in the Add/Remove Programs list, while CS2 was shown to be many times that size (gigabytes?). I called support within the first month and was told it would be okay to uninstall CS2, but the tech could not explain the difference in program sizes, so I left it in place until yesterday. Now, neither Bridge nor Windows Explorer recognizes InDesign files. I can still launch the program from the Start menu and Desktop shortcut, and I can open files from within the program. But Bridge says the default for opening an INDD file is Acrobat...or Photoshop, Firefox or IE. Windows says the same. The INDD icon is no longer displayed in Windows Explorer either. It seems to have vanished from my system. I have tried to re-associate InDesign files with the program through Windows Explorer numerous times to no avail. Operating System: Windows XP Professional on a Dell GX270.
Is the only solution here to uninstall & reinstall InDesign? Any comments or suggestions are appreciated.

Hi,
I'm having the same problem, with two exceptions:
1. A previous version of InDesign has never been installed on this PC before we got CS4.
2. It tries to open the files in Acrobat (7.0), and then this message pops up:
Acrobat could not open "....INDD" because it is either not a supported file type or because it has been damaged... To create a PDF document go to the ...
This is incredibly frustrating. The only way I can open files is to go through the InDesign "open file" command inside the program. I cannot open any Bridge files at all (same problem, opens in Acrobat).
I cannot chose the file type from the file association list as it does not show up on the list no matter how many times I search and choose it from my drive to associate.
... Is this a registry problem, maybe?

Can't Open ACR files from Bridge in Photoshop CC 2014

I Can't Open ACR files from Bridge in Photoshop CC 2014. I have uninstalled the programs, and all other versions of PS several times, but no matter what I do, I can't open a raw file I have opened in Bridge, in PS CC 2014. I have to click Open in Photoshop CC 2014 in Bridge.
Also, on my workstation PC (Win 7 64bit), if I don't open PS prior to opening Bridge, then when I try to open a file from bridge it says it can't run PS on an earlier Operating system than Win 7!
I have done exactly the same instalation on my notebook, same OS, and everything works perfectly - I just don't understand.

Guys! This question was asked almost two months ago, and still no-one has replied? I'm still stuck, no matter what I have tried, I cannot find a solution. And please don't ask me to re-install AGAIN, I've done this several times and it simply does not work.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

[bug] Can't open new desktop from mission control if dock is on the right side

I can't open new desktop from mission control if dock is on the right side

I recently moved my dock to the right so I didn't know the + sign would switch sides. I normally run around that many too depending on how large of a stack whatever I am programming is using.
Anyways, thanks for the help

My imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

my imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

Hello,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

How can I open a program using Java and then perform certain tasks with it?

For example, and this is just an example, I want to write a Java program that opens MS Paint and then manipulates that program. This can be useful to automate certain tasks.
My question is whether this can be done writing Java code and if so how? If not possible, would I need to use a scripting language instead?

write a Java program that opens MS Paint and then
manipulates that program. This can be useful to
automate certain tasks."manipulates" is a too wide term. Let me narrow down:
1. If you want to open (run) the program and then shut (kill) it down it is possible and fairly trivial to do in java. Look up Runtime and Process classes in java.lang package
2. If you want to open the program and edit some image/document in the opened program. It is very difficult in java. May be possible... using some Java/COM bridge, assuming your native program is COM/Active-x compliant. Note: these things go beyond the boundary of JVM and needs to interact with host OS and involves shared memory, ipc and all "low level" stuffs.
If you want to be able to play around with these COM/Activex apps- choose .NET instead :-)
3) You can open the program from java and pass it some command line arg as in (1) above and then the program will load that document/image at startup automatically. You may then edit the doc/image thru that program itself. However, Java is not doing anything for you here, other than just starting off your native mspaint.exe ot notepad.exe.
-BJ
Message was edited by:
Bimalesh

Can't Open Any Programs

I had been on Safari for awhile and had to leave the computer for about 10 minutes. When I came back the mouse is responsive, but nothing else is. I can't shut down any program or the computer. I did a forced shut down, and it starts back up just fine but now I can't open any program. The mouse moves around the screen but nothing else seems responsive. After 5 minutes, my screen saver comes on like normal.

Hi
what OS are you on - Leopard, Snow Leopard ?
I suggest booting from the install dvd, repairing permissions (just in case) using Disk Utility from the dvd and using the 'repair disk' function too.
You might also see what starting in Safe mode does for you - hold the Shift key on startup

Can't open a Program from Classic

Similar Messages

Maybe you are looking for