Can't open a third party CS5 project in CS5

I purchased 3 After Effects projects from a third party website http://www.pond5.com/ and I downloaded the CS5 version on 2 of them and like CS4 on one and only the CS4 version works. Yes I tried searching their website for help but there is none. Just wondering if there is any other reason this might be rejected the error actually says something about attempting to open a project created with 10.0 and cannot be used with this version. I did an update as well no luck.

Make sure to apply all the pertinent updates. Also perhaps those CS5 files were saved down from CS5.5 and contain garbage. Likewise there may be third-party plug-ins involved. Same for fonts or specific cross-platform issues. So many things that could be wrong here. Without knowing what the projects contain, impossible to diagnose. If everything fails, you can always download the CS5.5/ CS6 trial and open it there...
Mylenium

Similar Messages

I can't open every third-party applications on my iPhone 4S, please help!!

Hello everyone,
Here's my problem:
I can't open every applications except all the built-in appplcations (Calendar, Clock etc.), in other words, all third-party applications are crashed when I open them.
I use two accounts (A & B) to download apps, after I change my current account A to another one B, the applications which belongs to B are working, and I try to download a new app it's working too.
When I change account B back to A, B's apps are still working, however all A's applications still crashed. But I downloaded a new app using account A, it's working...
So what can I do about all my existing account A's applications?? please help me thx...
Info:
iPhone 4S 16G (unjailbroken)
iOS 5.1.1

Why are you using two accounts? That is most likely creating the conflict. Try picking ONE ID, then try downloading a new app from the App Store on that ID and see if your other apps work.

How can I set a third party application to access my organizations intranet through my organizations network

how can I set a third party application to access my organizations intranet through my organizations network . I am using blackberry bold 9700 OS 6

Hi deepajithesh
This feature is not available. Applications access the BlackBerry Network using the connection to BIS.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT6533 Where can I find the third party app? I'm really in trouble that I can't record and check my blood glucose. Of cause I exported the data from app, but It's not readable for me. Please reply ASAP and give me other solution.

Where can I find the third party app?
I'm really in trouble that I can't record and check my blood glucose.
Of cause I exported the data from app, but It's not readable for me.
Please reply ASAP and give me other solution.

You find third-party apps in the App Store. What app are you looking for? Due to problems, Apple removed the ability to record that information in Health. You can always go back to whatever you used before three weeks Health was released. Why can you not check and record your blood glucose? I would assume you check it using blood samples and a glucose meter which has nothing to do with your phone. You should be able to record it in any number of apps, from Notes to purpose made third-party apps.

Can I open Final Cut Express HD project in FCP????

Can I open Final Cut Express HD project in Final Cut Pro?

This appears to be a duplicate post. Responses should go here
x

JUst installed OS10 maverick. Got updated epson scanner software. update refused opening saying third party could not be opened. same thing when trying to open grab tif file in photoshop. any ideas?gr

Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file. Also tried to open grab tif file in photoshop. also denied as third party file. Any ideas?

dmartinnyc wrote:
Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file.
If you are trying to install the updated Epson scanner driver when you get this message, it will be due to the installer not being digitally signed - which is odd if it is an updated driver. To get past this block, which is a function of Gatekeeper, hold down the Control button and click the installer. A pop-up window will appear. Select Open from the menu. You will now get the option to install the driver software.

How can I remove a third party widget

I downloaded a noisy third party Homer widget (on leopard) and now can't remove it.
The finder search instructions say use f12 (but for me that is the volume control), I used f4 to open widgets but can't see anything for managing or removing widgets. The finder instructions say open with + but I can't see a plus or a manage widgets command.
Thanks.

Open up Dashboard, then click the + in the lower left corner and add the widget called "Widgets". With this widget you can manage your widgets. If you want to get completely rid of a widget you need to delete it in the Finder. Go to /Library/Widgets or ~/Library/Widgets and delete the corresponding .wdgt file from there.

Sending data directly from BW To Oracle DW via Open hub Third party tools

HI All
We need to send data from SAP BW 7.0 to Oracle 11g DW. The requirement is to pass data through open hubs. So we wanted to explore the option of directly passing the data from BW to Oracle using third party tools. So i tried to gather information on the third party tools and came across list of APIs and some pointers on creating a RFC through SM59. But dont know how to do it or what parameters to pass. Could you please point me in the direction or list me step by step detailed instructions as to how I can achieve this?

Hi Amit..
I can see the following will make things work for you.
1) BODS.
2) PI ( XI).
3) BI7.0 to FTP and from FTP you to push these tp your oracle system..
Regards,
rajesh

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

Can't open raw files in cs5. When I try to download updates I keep getting download errors ? I have a canon 5D mark 111 ?

I am currently running CS5, on windows. I can't open any raw format files in photoshop (I took some photos with a canon 5D mark 111). I went to updates tab to try to update cs5, but I keep getting download errors and am unable to update. Any ideas on how to fix this ? Trying to edit some wedding photo's I took.

If this is a Photoshop question please post in the Photoshop forum.

Can't open CR2 files in CS5

What do I need to download to pen Canon CR2 files in CS5?

without know what camera you're using, I would say that you need to download the Adobe DNG converter 8.8 is the current one. That will create dng files that can be opened in CS5.

Can not open raw files in CS5

Hi
I cannot open my raw files in CS5. I have a canon 40d and I am on a computer that runs Windows XP. I have no problems with my CS3 wich also runs on my PC. Can any one help?

Trying to use DNG is the wrong approach. Photoshop Camera Raw should be able to open your 40D raw files directly. Having to go through two conversions would be a huge monkey wrench in the works.
Some questions:
Do you have anything programmed for your Additional Plug-Ins Folder in Edit - Preferences - Plug-Ins?
Can you open a Canon .cr2 raw file in Photoshop CS5 by choosing File - Open As..., selecting Camera Raw (...) from the bottom, then choosing your file and pressing [Open]?
Is there anything special about your camera? Has the firmware been modified?
-Noel

Can't open old files in CS5 since upgrading to OS X 10.9 Mavericks

Since I upgraded to OS X, I can open all my CS5 programs and create new files. However, I can't open files I created (even a week ago on CS5) since I upgraded to Mavricks. I googled it and I tried updating my Adobe drive and I updated Java, but I still can't open any file I created before downloading mavericks. In Indesign, I get an error message "Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing or the file may be opened by another application" and In Illustrator I just get the spinning wheel of death...
Any ideas or suggestions?
Thanks!

Talk to Apple support about updating your permissions - that may be it.

Can't open jp2 files in CS5

Hi,
every time I try opening a .jp2 file, I see only a semi-transparent grey layer. How do I fix this?
I'm running CS5.5 on 10.6.8 the video card is a 6970M with 2 GB and the system has 16 GB RAM.

You might be right about the creator application. If i open the same file converted into something readable for photoshop and save it as jpeg 2000 in photoshop, the file can be opened afterwards.
The "creator application" is the mac's built-in image capture I use to scan documents.

Can't open files in bridge cs5

I'm unable to double click on any type of file and have it open in the appropriate cs5 exe file. In 64bit photoshop the mini bridge shows files but I can't double click, I have to right click and tell the file to open. In 32 bit the mini won't show any files. Not sure why this is happening, cs4 bridge worked fine any suggestions???

There is some problems with mini-bridge. Go to
the photoshop forum and find that thread. May this will help. http://forums.adobe.com/thread/628677?tstart=0
This is new function in CS5.

Can't open a third party CS5 project in CS5

Similar Messages

Maybe you are looking for