Can't open a whack of photos by dragging to PS icon in dock

I was able to do this. I install Snow Leopard and now this photoshop feature is not working. Any suggestion on how to fix?

I realize this has been answered, but I found a nice workaround that may work for some. I am posting in this thread because it was helpful to me. I will also begin a new thread that contains the same info.
It was as simple as creating a DROPLET and then dragging the multiple files (JPG, TIF, EPS, etc) onto the DROPLET to get them all to open at once. Here are the steps I took:
• I created a new action in Photoshop CS3 and named it OPEN FILES
• I hit the action RECORD button
• I did a FILE>OPEN and chose a single file
• I hit the action STOP button
• I did a FILE>AUTOMATE>CREATE DROPLET
• I selected the OPEN FILES action and named my droplet OPEN FILES
• I checked the OVERRIDE ACTION "OPEN" COMMANDS
• I hit the OK button
Now I can select multiple files and drag them onto the DROPLET rather than dragging them to the PS icon in my dock or an alias of PS.
It may not be a perfect solution and your mileage may vary, but it worked for me and now I can wait for either a patch from Apple or wait until we upgrade to CS5.
I hope this helps some. Have a great day!

Similar Messages

  • Unable to open images by double clicking or dragging image to icon in dock  - can only open by going to file open

    I can no longer open images on the desktop by clicking or by dragging to the Photoshop CS 1 icon on the dock. I can only open by going to File - Open.  I was able to do this before my Mac OSX 10.3.9 version crashed and I re-installed 10.3.4 and upgraded now to 10.4.11.  Help?

    this is covered in the FAQs

  • HT201210 i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the  i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the devi

    i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the  i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the device withpc

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Can't open any of my photos in my iPhoto library anymore

    I haven't been able to open any of my photos with iPhoto recently. They exist as photos in a separate folder on the HD. And when I tried to move them into iPhoto folder I get a message that the photos are not readable and yet I can view them in the Preview window.
    It was working perfectly until this problem came up.
    Any clues anyone?
    G4 Powerbook   Mac OS X (10.3.9)  

    I think I have the same problem. I can't upload pics from my camera any more either. The funny thing is, when I make a new account and log on to it, iPhoto works just fine. I'm pretty sure the whole problem started when I downloaded the latest updates a week ago or so. It kind of upsets me that these updates would mess things up and you'd think that Apple would of, or does know this. Do I need to reinstall iPhoto from disk? I bought my laptop in Jan. and my 90 tech support just expired, I guess all electronics bread right after the warranty.

  • IPhoto can´t open most of my photos, Why???

    Hi, my iPhoto can´t open my photos, and neither the tumbails, what can I do???

    We'll need a little more info from you before we can speculate.  We can't see your monitor so have no idea what's going on except what you tell us.   What version of iPhoto and system are you running?  What exactly do you see when you open iPhoto. Have you tired any fixes and, if so,  what were they?
    OT

  • I can't open Iphoto because of a "?" on the logo on the dock

    My problem is I can not open Iphoto. I'm afraid not to find my photos again....all of these are in.. Actually, a "?" is on the logo on the dock. When I click on it, there is just "option > delete the app". Can somebody help me please !!? Thanks

    then (Probably #1 or possibly #2)
    if it is not there then
    reinstall from the original source
    Could be
    1 - the restore disks that came with the computer
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    LN

  • I can't open Firefox no more, I try clicking on the icon but it doesn't even load anymore.

    After some time I realized I can not open Firefox anymore.
    I have always used Firefox as my default browser and I really like their features, it's the best browser for me, but for 2 weeks I haven't had the possibility to open it.
    I have tried many ways, such as try to open new tab, or try to open new windows, or try to open new private session but none worked. It's impossible to load Firefox. I have been searching on different sites to finally resolve my problem but it didn't help me at all.
    I also reinstalled it many times but the same problem.
    Thanks in advance and any help will be welcomed.

    sorry for the inconvenience caused to you. This may not be a problem with the fire fox instead this may be a problem with your computer.
    Plz check your computer for virus mainly "Trojan". download an antivirus and run a full scan and also be updated to latest fire fox version.

  • Can't Open Files Or Folders By Double Clicking on Its Icon

    I'm unable to open any file or folder by double clicking on its icon whether the icon is on my desktop or in a folder.
    For example, I can't open my hard disk or any DMG file on desktop by double clicking on its desktop icon, but I can open it or any file or folder by control-clicking on the icon and then clicking on 'open'.
    In my Finder, If I double click on an item in 'list' I can open it and in' columns' if I double click on an icon in 'preview' it will open/ launch and in 'cover flow' if I select an icon and double click on it there the file will open/launch.
    I've repaired permissions, 'verified disk' in Disk Utility (no problems found),
    run Disk Warrior as well as Applejack but the problem persists.... I just can't open by double clicking.
    Anyone have any ideas?

    Pretty weird...but I think I've heard of it before. I have no direct answer, but when weird stuff like this happens, I think of trying things like:
    -boot from OSX DVD and check operation
    -Time Machine backup
    -Safe Boot - might correct something
    -log out of user account and/or log into another user account, and see if doubleclick returns
    -and the usual SMC/PRAM reset
    I'm assuming you've diddled with the mouse/trackpad settings. Did you try a mouse?

  • Can't open apps with contextual menu, or dragging onto dock icon

    I've recently reinstalled Tiger and updated successfully with the 10.4.11 combo installer.
    I've discovered that when, for example, I use the contextual menu to open a jpeg with Photoshop CS, nothing happens. If I try to drag it onto the Photoshop icon in the dock, the app will open but the file won't.
    Double clicking the file opens it in Preview (default), but I sometimes want to do more than view it in preview - I want to edit it in PS. I can only open it from within PS. Also, when using Iphoto, even when I select external editor it won't open in Photoshop.
    This is a new quirk and I've never had the problem before. I'd appreciate any suggestions of how I can solve this. Many thanks, Karen

    Before I start trashing things, just to play it safe ... what are the consequences/downside of getting rid of those folders?
    Just move them to the Desktop incase we need for some unknown reasin to put them back.
    Should I just move them out one by one to see if I can isolate the problem?
    Yes, you could do that, but... I think some prefs help rebuilding other prefs if present.
    I have created a new "test user" - I guess I should log out/log in to see if the problem is still there before doing any throwing away of prefs, right?
    Yep!

  • Can not open many programs including Safari on double clickng the icons

    I can not open many rograms including Safari on clicking respective icons. It was working fine a few hours ago. I have rebooted trhe computer without success. Needhelp.
    Thanks

    Hey sachkavee,
    I would run through the troubleshooting steps in the following document:
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/HT1199
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • Files won't open from finder or by dragging to application icon in dock

    Clicking or double clicking on a file in finder causes it to blink as if it is opening but it does not open. Dragging the file to its application in the dock causes the application to open but the file does not open. I can only open a file from inside an application using File > Open.

    Welcome to Apple Discussions.
    First of all, are running you have any third party apps that change your system appearance?
    If so, try removing them from login items (see below).
    Then, create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    (Note: If you are running build 9C7010 do not install the Update.)
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Can't open NEF (Nikon Raw) photos in CS2

    Using CS2 on a Power Mac G5, running 10.5.8 with plenty of ram. Photos taken on a Nikon D700 in Raw format and transferred directly from camera to computer using Nikon Transfer. When I try to open a photo marked NEF in Photoshop's Bridge, I get a message that " Could not complete your request because Photoshop does not recognize this type of file".
    Next, I downloaded Camera Raw 3.7 from Adobe's website and when I click on the icon in my applications folder, I get that same message : "Could not complete your request..."
    The only way I can view and work on my raw photos is to convert them to tiffs or jpegs in my Nikon View NX program; But I want to process them in the raw convertor.
    Help!!
    Bob S

    You'll need to covert the NEF to DNG to open in Camera Raw. CS2 will never support the D700.
    http://www.adobe.com/products/dng/

  • I can't open my camera roll photos because somehow it is behind the gray area of the "Albums" banner. Has anyone else experienced this? Thanks in advance.

    I apparently screwed something up and now I can't tap to open the photos in my camera roll because it's hidden behind the gray area of the Albums banner. Does anybody know how to correct this? Do I need to fix this in iPhoto or is it something I can do within photos on the phone?
    Thanks,
    Neal

    Thanks Lawrence!
    I didn't try that because after I posted my question I found a similar post where they just reset the setting. I did that and it worked. Of course I had to change some stuff back to the way I had it. next time I'll try your suggestion.
    Thanks again,
    Neal

  • Can't open some (not all) photos in Develop

    Hey all,
    I'm running Lightroom 1.1 on my Powerbook G4 (1.67ghz, 2 gigs of ram).
    Recently had a data base corruption problem, reverted to my backup, everything seemed fixed and working fine. However, it turns out that some files (not all) can no longer be opened in the Develop module: when I'm trying to open one of these files in develop, the preview shows but the panels remain disabled. This happens to both JPEG files from a Canon EOS 350D and to DNG files from a Leica M8. If I select another affected file in the filmstrip while this is happening, the image in the navigator changes to the preview of the newly selected file, but the image in the main viewer remains that of the first affected file selected. If I select a unaffected file from the film strip, the develop module loads properly.
    I've checked the catalog's integrity, and even optimized it, but nothing helped.
    The affected files are present on disk and open in Photoshop just fine, so they're not corrupted.
    Any ideas on what's going on?
    Thanks :)

    I am having the same Problem but I have many folders in Lightroom....many are in Red type and they say File Cannot Be Opened. I went to import and imported one from external drive to the same external drive folder and it came in fine and the images now open fine in the Develop module...will I have to do that to all my folders ....Whew!!!! Will I lose all my edits? Whew!!!! Is there a better way.....Gerald

  • Where is the trash in ipad and how can I open it  to restore photos trashed

    I got a new Ipad and I had erase photos just installed - all 1 album. I would like to restore them because I had also erase from my SM card,  So these photos are lost unless I can find where and if there is a trash where I can pick them back.  It is all new... and I am upset. Thank you for your help.

    There is no trash can.
    You delete something, it is gone.

Maybe you are looking for

  • Dunning Smartform F150_DUNN_SF configuration

    Hi, Could anyone let me know the steps involved in configuration of Dunning smartform, I am also having a requirement where I have to configure Dunning smart form F150_DUNN_SF with the standard print program. Could you please explain me the steps to

  • Error 1004, 1013,

    i am using iphone 4 (GSM)(FACTORY UNLOCKED). I was using IOS 4.2.1 but i updated it to 4.3.2 but in end some error 1004 came and my phone stuck in dfu mode.. so i google about solution... and i found tinyumbrella software.. i used it for exit dfu mod

  • User.dir Web Logic Server

    Can I set an environmental variable like user.dir in the Web Logic Server ? Thanks in advance Edited by: Xavi on Apr 30, 2010 3:48 AM

  • JTable addColumn into original position

    Hi, I have wriiten a generic dialog box to allow a user to select the visible columns in a JTable. Basically a TableColumnModel is passed to the routine to dynamically create a grid of JCheckBox's using the info from getHeaderValue(). I create a list

  • Faglflext table fields

    Hi Experts,                 Can anybody please tell me the difference between the following fields of FAGLFLEXT --- TSLVT and HSLVT TSL01 to  TSL16   and  HSL01 to  HSL16 Thanks in advance, Regards, Murali Krishna T