Can't open Adobe Captivate 8 trial.
Can't open Adobe Captivate 8 trial. Error reads: The procedure entry point NormalizeString could not be located in the dynamic library link KERNEL32.dll. I'm into my trial and can't even get into the program.
Any thoughts or recommendations on how I can get through this and access the program. I've tried to download it a couple of different times and come up with the same error.
You need to launch Captivate as administrator. On Win this can be done by
right-clicking on the Captivate shortcut key, and either you choose 'Run as
Administrator' or you open Advanced dialog where you can set to launch
always as administrator.
Similar Messages
-
I can't open adobe captivate 8. I get a message that say the file archive part of adobe captivate 8 is missing. Please download all parts. I have the serial number. How do I download all parts?
Hi There,
It seems that you have only downloaded .exe file. You need to download two file .exe and .7z and put it in a same folder and then try to run .exe
Regards,
Mayank -
Can't Open Adobe Captivate 4 File in Captivate 5.5
Hi,
Anything special I should try or be aware of?
Whenever I try to open my 2008 Captivate 4 files in Captivate 5.5, I get the familiar can't-do-that-for-some-reason error message. (The one that suggests the file is already opened, or it was unzipped badly, not enough memory, and so forth.) Since Captivate 5.5 removes the import feature, I can't try that.
So far, I've tried running it with nothing else open on my computer (I have 10 GB of RAM), made sure to empty the cache first, and so forth.
In desperation, I'm also redownloading 4 now and giving that a try, but any other suggestions would be great.Notes for future searchers... here is how I solved this problem.
Short Answer: Open the file in 4, resave it, and it opened in 5.5.
Long Answer:
I downloaded Adobe Captivate 4. Fortunately, I had my license active and registered here on the Adobe site. Installation of Adobe Captivate 4 on Windows 7 was a bit weird... it asked me to reinstall Flash which I already had installed, it insisted that Adobe Captivate was currently open, and so forth. I let it reinstall Flash and I rebooted, and 4 was good to go. I made sure to install Captivate 4 in a custom location, not wanting to overwrite any resources or other things in the Adobe folder for 5.5. Then I opened the old file. It actually performed some kind of update thing when I did this, which leads me to believe that I was formerly working with a less-than-latest version of 4 or maybe even 3! Once it completed, I saved it as a new Adobe Captivate 4 file. Then I was able to open THAT file with Adobe Captivate 5.5, and save a new file again.
For some reason, fonts didn't carry over. So I reset them in all my captions, and then recompiled successfully. -
Help - Can't open Adobe files, after expiration of Adobe pro free trial
I had a 30-day free trial of Acrobat 11 Pro, since the free trial expired a few days ago I can't open Adobe files. When I try to open them a pop-up box appears telling me to buy Acrobat 11 Pro...when I decline, it automatically closes Adobe
I want to read files with just basic Adobe reader (not Acrobat 11 Pro) and I don't know how to make it my default
Do I need to purge Acrobat 11 Pro? (I'm using Microsoft OS)
Thanks!Use the Adobe Cleaner to remove Acrobat and Reader COMPLETELY: http://labs.adobe.com/downloads/acrobatcleaner.html
Download the offline Installer to reinstall Reader: http://get.adobe.com/reader/enterprise/ -
Can't open Adobe Reader XI and reinstalled can't help.
A user Win7 PC (Windows 7 Pro. x64) can't open Adobe Reader XI after turned off computer directly during windows udpate (Not finish update)
The opened error message is:
===============================================================
c:\Program Files (x86\Adobe\Reader 11.0\Reader\AcroRD32.exe
支援映像類型所需的子系統不存在
(translate to english from google: Subsystems required to support the type of image does not exist)
===============================================================
Have tried.
1. Uninstalled and reinstalled Adobe Reader XI. Still have same open error when opened program.
2. Used Adobe Reader Cleanup tools to clean up installed file and reinstalled Adobe Reader XI. Still have the same open error.
3. Uninstalled and installed Adobe Reader 9. It can work normally.
Now I let the user to use Adobe Reader 9 but need to solve for him. As some pdf files are needed by newer Adobe Reader version.
Please help to fix. Many thanks.I have a similar problem - just posted this today, 5th July 2014. I get a message that says windows cannot find c:\programme files(x86)\Adobe\Reader 11.0\Reader\AcroRd 32.exe. Tried several uninstall/reinstalls with special programmes to check that uninstall was complete. Oddly, a download trial of the full programme Adobe Pro works OK ! If an expert out there can sort this it would be much appreciated.
-
How can I download Adobe Captivate 7 trail version?
How can I download Adobe Captivate 7 trail version?
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Download Adobe Captivate 7 Free Trials: Direct Links w/o Akamai | ProDesignTools -
I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.
Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya -
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in high resolution without any problem. Any advice would be much appreciated. Thanks.
There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
Mylenium -
I own Adobe Acrobat 9 Professional. This software can be installed on two computers.
The hard drive in one of my two computers died. Fortunately, I've been doing full-image back-ups (which include the operating system) to an external hard drive. I copied the most recent image (a few hours old) onto the new hard drive.
I can't open Adobe Acrobat 9 Professional from new hard drive. It's telling me that I already have installed it twice and that I'm requesting a third installation which isn't permitted.
How do I get a usable copy Adobe Acrobat 9 Professional on the new hard drive?
Do I perform a Windows Control Panel "Delete" on the program and re-install it from scratch?
Or, is there another procedure?
OR, am I SOL?
Thank you,
JulieYou don't mention the backup software you use, but it would SEEM that it is missing the "hidden" registration files on your hard drive
I use multiple boot drives, via drive swap hardware, making and restoring backups each time I test new software... really easy to go back to "before install" by swapping a drive or restoring a backup... described at http://www.pacifier.com/~jtsmith/ADOBE.HTM
The backup software I use is at http://www.terabyteunlimited.com/image-for-linux.htm - the program includes a "makedisk" routine to make a bootable CD, so the software runs on Linux, completely outside Windoze, and goes direct to the hardware controller, not through the Windoze drivers
This creates a COMPLETE image to an external USB hard drive, and the restore works with all registration information intact -
How can I open Adobe Air on my MacBook Pro?
How can I open Adobe Air on my MacBook Pro? I get the installer, and an image appears in the Applications folder, but it won't open.
When I download the file I linked I get a disc image (.dmg) file: Air3-5_mac.dmg. Double-clicking mounts the disc image and opens a window with the installer:
Double-clicking on the installer opens: -
I can not open adobe air 3.9 (says all ready installed
I can not open adobe air 3.9 (says program all ready installed)
Hi,
Wrong forum. Air's forum is just down the hall at:
http://forums.adobe.com/community/air
Be well... -
can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help
its says that its currently not availabe
I have so many work counting on this programme plz helpThank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards -
We have a new office desktop that will not open .pdfs or open Adobe Reader. The version on the computer is 9.5.2. When I try to install updates or install Adobe XI, the installation process stops before completion because it says Adobe 9.5 is currently being open. But we can't open Adobe 9.5, and task manager does not even show the program as being open.
I have tried uninstalling the program, but have been unable for the same reason.You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
I am unable to open Adobe Reader XI on my new PC with Windows 8. Everytime I open a file, it just hangs and says (Not Responding) and I am forced to close the file. I have even uninstalled and reinstalled the program, but the problem persists. When I open the folder, if I choose preview, the file shows up fully, but would not open the file in a proper way. It also works in Adobe Reader when I open a file on the internet that is saved in pdf format by the provider (like a company's annual report) and am able to switch to the Reader. The only time it fails to respond is when I try to open a file directly, either by doble-clicking on the file or by File-Open comman in Adobe.
Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html -
I can't open adobe after effects CS6 11.0.2 in OS Yosemite
I've just updated OS Yosemite and then I can't open adobe after effects cs6.
It says "you can't use this version of the application "Adobe After Effects CS6" with this version of OS X. You have Adobe After Effects CS6 11.0.2"http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5696&fileID=5715
Go to this website and download the latest After Effects CS6 (11.0.4)
Maybe you are looking for
-
How to use a collection type of bind variable for execute dynamic statement
Hi, We have a case where we copy selective data from Schema A To Schema B in one oracle database. The copy is achieved by using execute immediate 'insert into '||target_schema||'.tablea select * from '||from_schema||'.table a where a.id in (select te
-
Equivalent to SpreadSheet? (I need to merge cells)
Hey all, I'm making a program dealing with scheduling. Now i need something that works as a Spreadsheet. a lot of you may say 2 use JTable, but there's a problem with that idea, i can't merge cells. For example The Columns are days of the week, Rows
-
When MagSafe unplugged, the external display and laptop need to be restart
Whenever I unplug my MagSafe when using dual-monitors, my MacBook and External monitor need to turned off/restarted. Why is this?
-
Best Sequence Preset and File Format for Editing HD?
I'm using Premiere CS4 and I'm starting a new project that was shot in HD. I'm dealing with multiple file formats, as several different types of HD cameras were used. This is for a feature documentary, so I need a balance between maintaining image q
-
Error generating test frame in FM
Hi I am not able to run the FM SAP_CONVERT_TO_XLS_FORMAT. i got message like error generating the test frame. Anyone pls advise me if i am wrong