Can't open appleworks file / resource fork issue

Hi,
I've just readt the post "Can't open old appleworks/clarisworks files".
My problem was that I got a "I/O error" when trying to open some appleworks files with appleworks 6.2.9.
I realize that I copy those file from my previous disk to a PC formated CD. Hence, some resource fork files should miss.
BUT, I don't have anymore the original files since I re-install my Mac...
If there a way to recover my files despite of this resource fork issue ? Is it possible to create again the resource fork file ?
Christophe

It's not a resource fork problem. If it were, adding the .cwk extension to the file name would likely fix it. AppleWorks 6.2.9 (the current version) can't open all ClarisWorks 4 or earlier files. It gives an I/O error. There doesn't appear to be a way to predict which files will cause problems. I've had it happen & not happen with all AppleWorks file types. These files can be opened by any other version of AppleWorks 6, including the OS 8/9 component 6.2.8. If you have the retail version of AppleWorks 6.2.9 or your “consumer” Mac came with an earlier version of AppleWorks 6 that you have updated to 6.2.9 & have Classic installed, you can "Force" AppleWorks 6 to open in Classic to open the files, save them as AW 6 files & then open them in the OS X version. Also, if you have Classic installed & have AppleWorks 5, this can be used to open the ClarisWorks files & save them as AppleWorks 5 which AppleWorks 6.2.9 can open.

Similar Messages

How can I open Appleworks files in Leopard?

I installed Leopard as an upgrade on my MacBook without problems. Everything seemed to open and print on my Epson Stylus CX7800 without problems; I was able to scan and print from a scanned file without difficulty; there was even an enhanced print dialog which was great. HOWEVER, when I opened files created with Appleworks 6.2.9, or created and successfully saved a new document and I attempted to print it AppleWorks and the print dialogue either locked up or crashed. I tried massaging everything I knew of but still was unable to print any AppleWorks document. I get the print screen and click print but nothing, nada happens. I cannot print to PDF on the left hand dropdown either.
I repaired permissions (both before and after installing Leopard) and have also dumped AppleWorks preference file, then restarting all to no avail. I cannot open the Appleworks files with either Pages or Keynote (did not even recognize the word processing files). When I attempt to, they crash after appearing to open a word processing file but all I got was gibberish! I attempted to open the files with Adobe 8 but it would recognize them and seemed to open them but then I got a "cannot open" message.
I have heard that trying to use Leopard with AppleWorks can cause a corruption of the hard drive. Is this true? I did find a way to solve my immediate problem but it is not one I like at all. I finally wiped one segment of my external 250GB drive and installed Tiger on it, then copied all my files to that segment. I can load and print Appleworks normally as before. I guess that is one kind of "fix" if a bit unwieldy since I prefer to use my MacBook from my reclining chair because of severe arthritis. ( I will again be out of the loop for awhile as my right knee is being replaced tomorrow.)
I am so curious as to why some seem to be able to use their AppleWorks. I did install Leopard as an update rather than wiping my HD and doing a new install. Should I delete AppleWorks and all associated files and reinstall AppleWorks and reinstall Leopard from scratch? Do you think that would help? I would appreciate any help anyone can give me as there are other problems with Leopard but less onerous than this one. Anyone out there to help the thousands of us who have used AppleWorks extensively as educators?
MacBook 2GHz Intel Core Duo with 2 GB 67 MHz DDR2 SDRAM and Leopard 10.5.1

I have heard that trying to use Leopard with AppleWorks can cause a corruption of the hard drive. Is this true?
No, not at all. AppleWorks actually runs better in Leopard on both my PPC & Intel Macs than it did in Tiger. I have found AppleWorks to be faster & more stable in Leopard on an Intel than any other system I've used.
I repaired permissions (both before and after installing Leopard) and have also dumped AppleWorks preference file, then restarting all to no avail.
There are more than one AppleWorks preferences to delete. Only deleting the .plist or just the files in the AppleWorks folder in Preferences will not work. They must all be deleted at the same time. Take a look at this user tip, AppleWorks has stopped working correctly.
Deleting the preferences often fixes printing problems. Also, make sure you have the newest driver for your printer from the manufacturer's web site.
I did install Leopard as an update rather than wiping my HD and doing a new install. Should I delete AppleWorks and all associated files and reinstall AppleWorks and reinstall Leopard from scratch?
Possibly. I chose to do erase & install with migrating users & data for all of my Macs. I did try the upgrade with the MacBook Pro & it was a disaster with failure to start up after installing Leopard. I was willing to take the chance because everything on my MacBook Pro is on my desktop Mac.

Can't open AppleWorks files

We just bought a new iMac with iWork. My husband started transferring his old files to it, but he can't open them. What do we need to convert .cwk files to iWork files?

Is there a way to copy AppleWorks from the iMac G5 to the new computer? Then he can just keep using the old databases.
You can copy the whole AppleWorks 6 folder from the old Mac to the new one, placing it in the Applications folder. Make sure you include all of the support folders as well. If you have customized the Button Bar I would move that preference file to the new Mac. It's located in HD > Users > (your account) > Library > Preferences > AppleWorks. Do not move any of the other preferences. I suggest burning the AppleWorks 6 folder & the Button Bar preferences to a CD so that you will have a backup copy should you ever need to reinstall again. To remain within the Apple software license, you need to remove the copy from the old Mac.
Also, is there a way to remove the .cwk universally, rather than one file at a time?
The user tip I linked to above can explain how to have AppleScript change whole folders of file names. I wouldn't remove the .cwk extension, though. It's better to have it than not.

Can i open appleworks files without appleworks?

I have two files in Appleworks format that I need to open and read/convert for someone on a PC. I personally don't have Appleworks (they gave it to me because I'm a 'Mac guy'). Is there any way I can open/convert these to Office so I/we can read them? I'm coming up pretty dry search on the Internets and The Google - it seems like a pretty closed format.
Thanks

If it's only a couple, you could send them to me, I'll convert them & send them back. Click my name in blue next to this post. My public e-mail address is in the biography section. Just replace (AT) with @. You'll notice while you are in my profile that I am a nurse, so I do understand confidentiality very well & I've done similar conversions for other users here, too.

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

I am having issues with trying to update safari. It keeps saying, "Safari can't open the file "Safari_Updater-2.exe" because no available application can open it.

I am having problems with trying to update safari and this keeps popping up, Safari can’t open the file “Safari_Updater-2.exe” because no available application can open it. Also, I have a bunch of pops and I have my pop up blocker on but I keep having pop ups.

The info below should help with your pop-up issue.
Check the links below for options to remove the Adware
Easy method: http://www.adwaremedic.com/index.php
Somewhat more difficult method: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
And, read this article below to see how the Adware arrived on your computer.
How to install adware
The Safari update can be found at The App Store updates section. Where are you obtaining the file?

Can't open CS3 file

Often can't open CS3 files (I'm working in CS3). Then when the sender resaves in new file, problem is fixed. Huh? Am I missing a plug-in? How do I figure out which plug-in I'm missing? Is this even the problem?

It's not unusual to have this sort of error on a windows machine when trying to open files saved on a Mac and sent without compressing first. I often see two files show up in the attachments, both with the same name.
One is the resource fork, which is useless to windows users and generates that kind of error if you try to open it, and the other is the data fork, which is what you need. You can usually tell the difference by the size. The big one is the one you want.
Peter

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
In OS, when the image is selected no preview:
Lightroom error:
Bridge, no preview:
Photoshop error:
Ideas, suggestions?
66 views on this discussion so far and no replies...
Please help.
Thanks in advance,
Arthur

Something appears to be wrong with your files.
Are most of your images approx. 3.7 MB?
This is very small for a 12 MP image.
If you go back to the original file on your laptop, what is the file size?
Also the fact that the Mac OS is not showing the preview is unusual.
Perhaps these files got corrupted when they were moved to your new computer.
Can you open these files OK on your old laptop?
Is the OS showing the previews on your old laptop?
Also compare the file sizes between old and new computer.
Have you tried repairing your permissions?
Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
Good Luck!

Can't open .jar file, nothing happens when I click, MAC OS 10.6.8

Hello,
I can't open .jar file, nothing happens when I click on the .jar file.
I have MAC OS 10.6.8
The thing it, I have desktop application that I'm building on Netbeans and when I compile and deploy it... it runs from Netbeans folder where I have all the files but copying the .jar on the desktop. It says "The Java JAR file "blablabla.jar" could not be launched check the Console for possible error messages"
Any idea or solution will be appreciated.
Thanks in advance
Charles

These are Java files. http://www.java.com/en/ is where you can get the latest Java for your operating system. If your Java files need an older version of Java, there are instructions on the web to downgrade Mac Java, but it is difficult, and poses security issues.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Some users can't open Excel files. It is trying to open it in Internet Explorer "An error has occurred. Please try again."

I have some users in my company that can't open Excel files from any document libraries on SharePoint 2010. The receive the error message "An error occurred. Please try again."  We don't currently use the Excel calculations services. When
a user opens an excel file they are prompted to either Read Only or Edit.
This affects less than 5 people in a large company. They have the Full Control permissions and have been able to open the files previously. There has been no changes made to the server either. I can't find anything that points to this in the
event viewer.
It doesn't matter if which computer that they try to open this up from either.   All computers are Windows 7 Professional with IE 9 and Office 2010 x64.
I can't find anything that points specifically to this exact error. None of the excel files contain pivot tables.    This one has me stumped.

I would make sure no one has open on machine / locked on machine (Would assume you checked this, but wanted to add)
Also would have assumed you restarted the machines (:))
Make sure the file security did not change (check to ensure no one changed the sercuity of the excel)
Make sure the version of excel is the same (Changing from 2010 back to 2007 affects the file, etc.. on convert) that no one converted and saved thus causing error in file.
Can they open other excel files?
It sounds like the excel file it self has changed if you cannot see issue in SharePoint logs.
If it is all SharePoint excel files - try deleting one persons access and readding them to see if that helps.
SharePoint has issues ;)

Can't open PDF files from Windows Explorer on Windows 8.1

Hello,
after I've upgraded to Windows 8.1, I can't open PDF files from Windows Explorer (directly double clicking the file). The AcroRd32.exe runs in the background (2x !) as I see the processes in task manager, but there is no user interface visible. I have Acrobat
Reader 11.0.06, the desktop version (not Metro). I tried uninstalling the Acrobat reader and installing it again but this didn't help. The only way to open PDF files is to close the AcroRd32.exe from the task manager, open empty Acrobat Reader from the desktop
and then drag&drop the PDF file over that window. This is quite inconvenient. Is there a way to fix this issue so I can open PDF files directly from windows explorer?
Many thanks!

I had to install adobe reader, but PDF's used to display just fine with IE, any idea what happened ?
Windows 8.1 pro.
thx
lee

Can't open movie files in browser or email

Hi, I'm not sure if this issue has been dealt with yet; however, I can't open movie files contained in emails or in my Safari Browser--even ones labeled as QT files. I am running Quick Time 7.0.4 on my 10.3.9 eMac. This is a recent problem, as I didn't have this difficulty until the last month or so. I had unchecked the "Open Safe Files" box in Safari's preferences some time ago as a precaution against a virus/worm, but rechecked it after the last one or two Security Updates. What else should I do to resume opening movie files? QT Player runs just fine with movie trailers, etc, but not in mails or the browser.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Under the Safari Help menu choose "Installed Plug-ins". This will confirm your QuickTime install.
Under Safari Preferences/Security make sure you've got plug-ins enabled.
Try dragging the email attachment to the Desktop and see if it plays from there.

Can't open appleworks file / resource fork issue

Similar Messages

Maybe you are looking for