Can't open .ase file in Dutch Ps cs4

Hi,
I can't open .ase files in Dutch PS cs4. I have tried it with different .ase files.
Can somebody tells me what's wrong?
Thanks,
Moreen

I was trying to open and old .pmd Page Maker file that was created in a Windows version of Page Maker. I am not sure what version they were saved in. The file was created in July of 2006 if that helps.
It's been a long time since I was up to speed on PageMaker. The pmd file extension refers to Pagemaker 5, right? InDesign should be able to import the output of PM 6.5 and PM 7, but I've found that the PM6.5 import is usually pretty decent, while for some reason the PM7 import is flaky. This probably is a result of changes in the way the documents were build by the, ah, "designers," and has comparatively little to do with the abilities of ID to open PM files of various versions. PM5, however, can't be imported by InDesign, I think.
What happens when you try to open them? Does InDesign crash, or does it fail without an error message, or ??? More details, please.
Is there a way to open this file. I also have a pdf that I created from this file. I have Acrobat CS4 Is there a way to export the pdf back to an Indesign file. Just another thought regarding this file.
Well, there's always the PDF2ID tool, but since PDF is an uneditable container format, the results of running a PDF through PDF2ID is not reliable. Sometimes you get something very much like the source document, but I've found that most often it is faster to rebuild from scratch. I didn't buy PDF2ID, but that is because my clients' bizarro formatting techniques break on conversion. A very simple document might come back a lot cleaner.

Similar Messages

Can't Open .ASE files

Greetings,
I seem to be unable to open .ASE files in my old, old version
of Photoshop 7.01. Which, I'm stuck with, since I'm broke. I've
tried to open .ASE files by loading them as color swatches, but
Photoshop only recognizes .ACO files.
Can anyone advise? Is there something I'm missing? Any help
would be much appreciated.
Thank you!!!

Hello raggat,
The Adobe Swatch Exchange format was introduced in CS2, so
the file format is not supported in the older version of Photoshop.
I would try to copy and paste the hex values from kuler to
photoshop though, hope that works! Let us know.

Can't open raw files in 32 bit CS4

Am using Vista 64 bit OS and because I recently purchased Nik Software's Complete Ed was necessary to change from initial set up of PS CS4 64 bit to 32 for their usage compatability. Had Camera Raw 5.0 on 64 bit version, copied camera raw 8bi plug in file format and placed in correct file format folder for the 32 bit version of PS. ...sounds easy enough...but when I attempt to open a raw file in PS or bridge it will not open and get message - Could not complete your request because of a program error. Camera raw does show up and only once under the About Plug In submenu. Have tried Purge Cache option. Can still open raw files as always in 64 bit version, save and reopen 32bit version to continue but hoping for solution to eleminate that hassle. Thanks for your needed advice!

Plugin's have to be rewritten for a 64-bit environment so copying the 64-bit ACR to the 32-bit folder won't work. You need the 32-bit version of ACR in the 32-bit CS4 folder.
I'm not sure if the ACR 5.6 updater will work to update both versions, or if you need to download and install the plugin's manually.
You can get to the manual install ZIP by following the PSE link near the top of the regular ACR 5.6 page linked on the updates page:
http://www.adobe.com/downloads/updates/

Can't open NEF files in Adobe Bridge CS4

My camera is a Nikon D90 and I downloaded the Camera Raw.plugin Version 5.2. to open NEF files in Photoshop and Bridge from the CS4 collection. It works perfectly to open NEF files in Photohop but Bridge is not able to show the files. I cleared the cache already.
Does anybody know, what the problem could be?
Thanks for your help!

Maybe the plugin is in the wrong folder? It should be in the Common Files/Adobe folder tree, rather than the Adobe/Photoshop CS4 folder tree (where only Photoshop can see it). Also, make sure there's only one Camera Raw.8bi installed.

Can't open .pmd file in Mac Indesign CS4

I am using Indesign CS4 in Mac OS X 10.6.2. I have done all the latest updates to Indesign.
I was trying to open and old .pmd Page Maker file that was created in a Windows version of Page Maker. I am not sure what version they were saved in. The file was created in July of 2006 if that helps.
Is there a way to open this file. I also have a pdf that I created from this file. I have Acrobat CS4 Is there a way to export the pdf back to an Indesign file. Just another thought regarding this file.

I was trying to open and old .pmd Page Maker file that was created in a Windows version of Page Maker. I am not sure what version they were saved in. The file was created in July of 2006 if that helps.
It's been a long time since I was up to speed on PageMaker. The pmd file extension refers to Pagemaker 5, right? InDesign should be able to import the output of PM 6.5 and PM 7, but I've found that the PM6.5 import is usually pretty decent, while for some reason the PM7 import is flaky. This probably is a result of changes in the way the documents were build by the, ah, "designers," and has comparatively little to do with the abilities of ID to open PM files of various versions. PM5, however, can't be imported by InDesign, I think.
What happens when you try to open them? Does InDesign crash, or does it fail without an error message, or ??? More details, please.
Is there a way to open this file. I also have a pdf that I created from this file. I have Acrobat CS4 Is there a way to export the pdf back to an Indesign file. Just another thought regarding this file.
Well, there's always the PDF2ID tool, but since PDF is an uneditable container format, the results of running a PDF through PDF2ID is not reliable. Sometimes you get something very much like the source document, but I've found that most often it is faster to rebuild from scratch. I didn't buy PDF2ID, but that is because my clients' bizarro formatting techniques break on conversion. A very simple document might come back a lot cleaner.

Can't open raw files in Adobe Bridge CS4

First of all, I use a macbook pro that runs on Leopard. My camera is 5d Mark ii. I have photoshop elements 8 for mac, but I love to use Adobe Bridge CS4 for basic editing. Here is my problem, it won't let me open raw mode to edit. I have tried the updates photoshop gives on their site, but no luck. I still can't open them. Please help me!

If you just go to Help>Updates, Bridge should take care of this for you, unless you've managed to get multiple copies of the plug-in into the folder. If you manually installed things, check to see that there is only one plug-in there, then let Bridge do it for you.

I can't open *.indd files in Adobe InDesign CS4

I've just installed the trial version of Adobe Indesign CS4 and I cannot open my *.indd files which contain my business brochures etc.
How can they be opened?
Operating system: Windows XP pro SP3.
Processor: Intel E8400, Gigabyte P35 Chipset with 4Gb RAM.
Thank you for your help.
Tim

Hi, I've tried double clicking as one would normally do and I get the error message:
Cannot open "filename.indd"
The files were created in Adobe InDesign by a company that specialises in brochure design and they kindly gave me the files they originally created (to be printed by a professional printer) so that I could make some minor modifications (for the next run from the professional printer), using my trial copy of Adobe InDesign.
I know that this company uses a Mac operating system but I don't know which version of InDesign they use. I shall ask them if this is relevant (which I guess it will be!).
Tim

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Can't open DMG-files

I can't open DMG-files anymore because OS X associates dmg-files with another program. Usually when I opend .dmg files a "virtual disk" opened, now another program starts.
I tried the Open with (Openen met in Dutch) function, but I don't know which program I have to choose. When I have this problem on a Windows PC I just select explorer.exe. Which file do I have to choose on my Mac? Or is there another way to solve this?
Mac Mini Mac OS X (10.4.5)

580/3026
Hi mrtn87,
welcome to Discussions!
/System/Library/CoreServices/BOMArchiveHelper.app opens .zip files,
and
/System/Library/CoreServices/DiskImageMounter.app opens the .dmg files.
If you have OnyX, you can try running the "Reset LaunchServices Database" and "Reset links between documents and applications" tasks, see if the problem disappears.
Here is a Terminal command you can try if you don't have OnyX (or one of the usual utilities):
/System/Library/Frameworks/ApplicationServices.framework/\
Frameworks/LaunchServices.framework/Support/lsregister \
-kill -r -domain local -domain system -domain user
Let us know.
Axl

Can't open .msg files more then once, saved or as an attachment to an email

we use :
microsoft xp & office/outlook 2003
can't open .msg files more then once, saved or as an attachment to an email
If we save an email as a outlook.msg file , we can only open it once, close it,
when trying to open it again it gives an error that it is not possible due to a scurity issue or it is already open.
After closing outlook and starting it again, we can open it once again.
Same when clicking an .msg that is attached to an email, but here we can switch to another email, go back to the one and open it again.
We have installed all updates for both xp and office 2003 also internet explorer 8.0 to test if that would work, normally we have ie7.0.

Hi,
1． What is the detail error information, please try to reproduce the issue and then post the detail error information here.
2． Did you save the msg file locally or on a network drive?
3． Please try to check security on the msg file and also check the drive NTFS permission.
4． Copy over the email messages from the affected user machine to a different machine and check if the issue persist.
5． Test if the issue persist after saving a new email on Mailbox to local drives.
6． Copy over the affected email messages from local drive to a PST file and check if these emails can be opened fine.
1)    Create a new PST file .
2)    Added to user’s Outlook profiles.
3)    Launch Outlook .
4)    Highlight a folder under this PST.
5)    Drag and drop or copy/paste the emails from local drive to Folder highlighted under the PST files.
Besides, please try to remove all the add-ins like Entrust and then test the issue again.
1.     Remove add-ins
1)    Uncheck all Third-Party Add-ins selected in Outlook , found under Tool\Options\Other\Add-ins managers.
2)    Export the registry hive below for backup.
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook \Addins
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\Outlook \Addins
3)    Delete the registry entries under the above path for all Third-Party Add-ins.
4)    Close , Open Outlook and attempt to open email message on local drives.
2.     Temporarily stop all third-party application running following the steps
below.
1)    Run MSCONFIG
2)    Go to Services Tab\Select Hide all Microsoft Services check box.
3)    Click Disable All.
4)    Restart the Machine Test if the issue persist.
5)    To revert back the above setting Run MSCONFIG, Go to General Tab , Select Normal
Startup and restarted the machine.
Regards,
Xiu
1 Translated from dutch as good as i know :
"Can't open : c:\test.msg, it might not exist, do you have the required permission to open the file or is it open in another application. Click
with the right mousebutton on the map click properties to view/check the rights for that map."
2 tried both, the network and locally, i have the rights to save it in the map and open it once, so thats not the problem, iseems that outlook locks the file after it is openen once.
3 security and ntfs permissions are ok, see 2
4 tried it from different pc's networks maps etc.
5 done.
6 in a pst file the msg can be openen ore than once, but thats not the problem, tried and this works, but i need to save an email as an .msg file.
7 addins removed and doen all of that part, didn't help.
We also have tried:
-Installing all updates and ie8
-going back to xp sp2 (fresh install of xp)
Only thing that did work was an msg file attached to an email, we couldn't open that more then once,
but after checking "Use exchange modus with cache" at the account properties we could open that more than once.
Now we need to be able to open the email's saved as .msg more then 1 time.

I can not open the file in Photoshop...

I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank you

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya

Can't Open any files in photoshop CS3

I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

reset the preferences per the faq?
http://www.adobeforums.com/webx/.ef4a07f/1

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Can't open .ase file in Dutch Ps cs4

Similar Messages

Maybe you are looking for