Can't open control panel

I'm running windows 8.1 Every time I try and open the control panel. An icon appeares down in the task bar. But it will not open. I need some help.
This question was solved.
View Solution.

Hi,
Try this: Press Win key+P, then select "Computer Only".
Jaco
Errare humanum est.

Similar Messages

  • Can't open control panel, my computer, etc. Help please!

    I just did an install of windows 7 on my macpro and everything seemed to go smoothly until it was all done and windows launched, i tried to open the control panel and i get an error message saying that
    "Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item."
    I also cannot launch Windows Explorer to simply browse files as it gives me the same message.
    Help is much appreciated.

    What did you install? and where (edu, ISO you burned, retail) as well as Pro, Ultimate or Home Premium? 64-bit?
    I take it this was a complete clean install. Not an upgrade DVD or an upgrade from Vista.
    Did you install on its own drive?
    Use Boot Camp Assistant (only needed if you put Windows on Mac OS drive).
    Tried reboot off the DVD.
    And, did you get far enough to install updates and drivers? Apple Setup (Boot Camp, off your OS X DVD)?

  • Windows server 2008 can't access control panel and can't choose "properties" under "my computer"

    Hello everyone!
    Today after a schedule restart on the night I thought everything was normal with my server. But When i go to "start -> control panel" it show me "empty". And if I try to lunch "change/remove software" via search window in
    "start" then nothing happen. 
    I know also that I can't right click on "computer" and choose "properties" in the start-menu. 
    Also another problem. I did install Fbackup to make schedule file backups on the night. The software worked well to launch when I had installed it, but after the night, this morning it just crash on launch.
    I can also tell that I did add from 4 CPU core to 6 CPU cores.

    Hi,
    Have you tried to see if the issue persists when you boot into Safe Mode? Since you it shows blank when accessing Control Panel, please check if the policy setting below has been
    configured.
    Please choose Start – Run - type (gpedit.msc) - click on (Administrative Templates) - (control Panel) -
    Prohibit access to Control Panel and Show only specified Control Panel applets. If they were configured, please disable them to see if it could resolve the issue.
    In addition, the issue may also be caused by the virus, please run a system scan to see if there is any virus. At this time, you can also launch Control Panel apps from the command
    line, and here's a list of .cpl files for your reference that you can print out:
    Accessibility Options
    access.cpl
    Add/Remove Programs
    appwiz.cpl
    Add Hardware Wizard
    hdwwiz.cpl
    Automatic Updates
    wuaucpl.cpl
    Bluetooth Properties
    bthprops.cpl
    Display Properties
    desk.cpl
    Firewall Properties
    firewall.cpl
    Game Controllers
    joy.cpl
    Internet Options
    inetcpl.cpl
    iSCSI Initiator
    iscsicpl.cpl
    Java Control Panel
    jpicpl32.cpl
    Licensing Mode
    liccpa.cpl
    Mouse Properties
    main.cpl
    Network Connections
    ncpa.cpl
    Network Setup Wizard
    netsetup.cpl
    ODBC Properties
    odbccp32.cpl
    Power Options
    powercfg.cpl
    Regional and Language Options
    intl.cpl
    Sound and Audio Devices
    mmsys.cpl
    Stored Passwords
    keymgr.cpl
    System Properties
    sysdm.cpl
    Telephone and Modem Properties
    telephon.cpl
    Time and Date Settings
    timedate.cpl
    User Accounts
    nusrmgr.cpl
    Windows Security Center
    wscui.cpl
    Wireless Link
    irprops.cpl
    Hope this helps.
    Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • I can't access "control panel" on my 4s from the lock screen. My settings are active

    I can't access "control panel" on my 4s from the lock screen or home screen. My settings are active.

    You can try resetting  Settings>General>Reset>Reset All Settings 
    if not
    Basics from the manual are restart, reset, restore
    Follow the 3R's- if a restart does not solve your problem proceed
    User troubleshooting is:
    1.restart, ie power off/on,
    2. reset  http://support.apple.com/kb/HT1430,
    3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

  • HT201317 Photostream to my Windows computer has stopped working. In icloud control panel, photostream is unchecked, I check it, hit options, nothing happens. I click apply and close. Next time I  open control panel, photostream is unchecked again! What ca

    Photostream to my Windows 7 computer has stopped working. When I open icloud control panel, photostream has become unchecked even though it has been previously checked. I check it again but when I click options, nothing happens. I click apply and close, but next time I open the control panel, Photostream has become unchecked again. What can I do?

    Lisaglenoak:
    When I first downloaded iCloud to my PC a little while back, Photo Stream initially worked. I was able to check/uncheck both boxes available to me, as well as click the Options tab to the right of Photo Stream. I could make changes, click "Apply", and everything was fine and dandy.
    Within a day, I opened the iCloud Control Panel, and despite how many times I would uncheck Bookmarks, it didn't matter. I would click "Apply", and it would automatically ask me to sign in again. When I did this, Bookmarks would be checked again. Additionally, Photo Stream was grayed out; I was unable to check the box (which was unchecked), and I was unable to go to Options.
    Somehow, I managed to get my iCloud Control Panel "unstuck", and currently, it is working fine. There are 2 steps that I did to accomplish this. The 1st step listed below may be the crucial element for those whose reinstallation of the program has not succeeded, in and of itself. It is a change that I haven't come across as a possible part of a solution to this problem; I just happened to stumble upon this whilst searching my PC for possible fixes to the problem.
    Step 1: Find your iCloud File Folder. (On my PC, I clicked the Start button in the lower left corner, then clicked All Programs, and finally scrolled down to where all the folders for various "things" are.) Click the Folder and a sub-list will appear, with items such as Calendar, Mail, etc. Right-Click the iCloud Program icon, and at the bottom of the list that appears, click on Properties. At the top, there are 5 tabs. Click the Compatibility tab, and you should see, at the top, the following words: "If you have problems with this program and it worked correctly on an earlier version of Windows, select the compatibility mode that matches that earlier version." Following these words is a dropbox underneath "Compatibility Mode", and for some reason - I have no idea why this is - the box was initially checked to run the program in compatibility mode for "Windows XP (Service Pack 2)". (And from what I understand, Windows XP is not a compatible Windows Edition for iCloud, so I have no idea why this box was checked.) If the box underneath "Compatibility Mode" is checked, than it is running iCloud in compatibility mode for any number of earlier Windows' Editions. Uncheck this box, click the "Apply" button, and then click "OK".
    Step 2: Find your PC's Control Panel. (On my PC, I clicked the Start button in the lower left corner, and then clicked Control Panel in the list to the right.) In the Control Panel, click Programs. Under Programs and Features, Click "Uninstall a program" (and bear with me here, because you are actually not going to uninstall iCloud). Now, scroll down the list and find "iCloud". Double-click the "iCloud" icon, and a panel with 2 options should appear: "Repair" and "Remove". Check the "Repair" box, which will reinstall the same iCloud Control Panel, replacing missing or damaged files. ("Remove" will just .. well ... remove iCloud from the computer - or, if you prefer, uninstall the program.) Click Next, and the repairing process will begin and end. And that is it - you're done. Task Completed.
    Well, in the end, this worked for me. Photo Stream was no longer grayed out. I could permanently uncheck Bookmarks (finally). The Options tab for Photo Stream would open. Anytime that I clicked the "Apply" button after checking/unchecking boxes, it wouldn't ask me to sign in again (only to come back to a Control Panel that looked just like it did before I made any changes to it.). And, I created a Shared Photo Stream on my phone using photos from my Camera Roll (to test the program), and the Shared Photo Stream appeared on my PC's Photo Stream in no time. Hopefully, this will work for you too (regardless of the Windows Edition you are currently using).     ~ Brian

  • Windows explorer does not start and could not open control panel.

    HP Touchsmart 610-1280
    When trying to open window explorer, it says window explorer is stopped working and trying to restart. But it does not open. Cannot go to control panel.

    Hello GLPP:
              Can you srst up the computer in safe mode. Turn off computer and turn it back on press F-8 and hold as the computer starts up. Ounce in safe mode open up recovery manger select microsoft recovery and do a back restore recovery choose a date as close as you can before this problem occurred and do the recovery. This will fix your issue.

  • Windows explorer crashed when I try to open control panel

    I have a Linx 10 tablet with windows 8.1 installed.  my daughter downloaded a fake chrome installer and when she tried to install it nothing happened (apparently).  I installed AVG 15 and it immediately detected a load of files infected with a
    virus which it removed.  Now I cannot open the control panel.  The window opens but is empty and then it hangs and I can only close the window by using task manager.  I tried to perform a system recovery (Full factory reset) using the recovery
    utility but it just sits there preparing.  I have tried to open a number of control panel utilities nut they either don't run or open a window the same as control panel and can only be closed by using task manager.
    I suspect that some of the files infected were system files used by windows as some of them were dll files.
    Any suggestions?

    Hi,
    Since this problem caused by virus infection, first of all, we need to use anti-virus software scan your system to make sure the virus were killed.
    Secondly, to fix this problem, you can try to use SFC /scannow
    command to fix system componments dll files lost or corrupt.
    If no use, try to use DISM /Online /Cleanup-Image /RestoreHealth
    instead for test.
    Roger Lu
    TechNet Community Support

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

  • Can't open Control Center on the Lockscreen after using Siri

    Hello everyone,
    I have got a little bug since iOS 8 and still be there in iOS 8.1 on my iPhone 5S (32Go).
    After requesting Siri something and get back to the lockscreen, i can't open the Control Center but I can still open Notification Center. After lock my phone and turn it on, I can open again the Control Center.
    Is there someone else with this little bug ?
    Thanks you all
    Bye

    No, I do not. I even tested it as soon as I saw your post. With the phone locked, I asked Siri to do something, after tapping to close it, it went back to the lock screen, I swiped upwards and Control Center came right up. Are you swiping from off the screen slightly when you start?
    If a restart and reset have not fixed it, then the next two steps in user troubleshooting are restore from backup, then restore as new.

  • How can i use control panel in win vista

    Can i get an old version of icloud ( may be V.2 ) to install an use control panel in win Vista. The newest version (v. 3.1) only works in win 7 or win 8

    You can get ver. 2.1.2 here: http://support.apple.com/kb/DL1687.

  • Can't Open Source Panel

    I closed my iPhoto source panel, for some dumb reason that I can't remember, and now I can't get it to reopen. When I click on the little dot, I get the little opener icon, which I can move, but it won't work to open the panel. The only thing I HAVEN'T done is to try restarting my computer. So, I'm going to do that now, and be back to either ask for help, or say never mind.
    Cheers, Da

    Move the cursor to the extreme left of the iPhoto Window until it becomes a '+', then click and drag right
    or
    trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    Regards
    TD

  • Help! Can't open side panel of power mac G4! I need in there!

    Hi, I just bought a powermac G4 for my retired parents and they need to hit the reset button but can't open the side panel to get in. They have tried moving the lockable cover latch and pulling the side handle but it seems to be jammed. Any suggestions. They live 400 miles away in Scotland so I can't try anything myself. Heellllppp!
    Any assistance most appreciated,
    Max

    Well, no one else has replied, so I'll make a suggestion.
    Place the left side of the G4 on the floor. Now push down quite hard on the top (right side) panel near the pull-up lever with one hand while pulling up on the lever. Hopefully the side panel will release.
     Cheers, Tom

  • Can't open control centre

    I have a Griffin survivor cover on my iPhone 4S and have just installed iOS 7. I can't open the control centre because of the case covering the edge of the screen. It seems strange because I can open the camera from the locked screen which is the same action as to open the control centre. It's quite frustrating to find that you can't use one of the best new functions of iOS 7. Does anyone know if there is any other way to open control centre?
    Thanks in advance.  

    How about adding the Control Center as a feature on the AssistiveTouch icon in the Accessibility part of the settings?? This icon is designed to assist if you are having difficulty touching the screen, which seems to be the problem all of us (including myself) are having. Otherwise preloading some multitouch gestures would be the super clean and professional way about solving it. You guys should really have loaded iOS 7 with multitouch gestures for moving backwards and forwards within apps like Safari, Messages, and others like them. E.g., two-finger swipe across for back or forward while browsing, two-finger swipe up or down for Notification or Control Center. Heck, use three-finger swipes if if interferes with the zooming or something else. Just saying you guys really need to step up your multitouch gesture game. iPads and MacBook Touchpads have had them for years!!!!

  • Can't see control panel as it is grayed out with little squares and lines

    printer is on and was working put in new cartridges and  all I have is an excalamation point blinking and contorl panle light is on but can read anything as it just has little  boxess and lines running up and down on the control panel.

    Hi Luke,
    Do you know what file would have to be changed in order to show the User in my issue for #1?

  • Can't access control panel

    When I open garage band the control panel with record, rewind, play etc is hidden below the menu. How do I adjust garage band window to access the panel?

    Do you mean it's hidden behind the dock?
    Is dock hiding on or off?
    You should be able to resize garageband by grabbing the lower right conner.
    Make sure you have the correct screen resolution.

Maybe you are looking for