Can't open Encore

I go Start: All Programs: Adobe Master Collection: The Encore Icon comes up and does it thing for a few seconds and then, Bleep....it goes off screen, back to my desktop.
All my other Adobe programs will open from the Master Collection???
I want to open a project to begin learning how to use Encore to author my edited project in Pre Pro CS3. I can't get it to open.
Is there another way to get to Encore with a project? Help.
Thanks Again
Jim

I found this and thought it was interesting:
"Re: How to fix Adobe Encore CS3 Crash ! ! ! READ by Abel Del on Jun 1, 2008 at 8:31:24 pm
Hi there!, I tried to load a cd/dvd on the drive...did not work!.... After a couples of days I finally hit the jackpot! ..here is how fix the Adobe Encore Cs3 Crash at the beginning..
The Issue was the Windows CD/DVD ASPI drivers for my DVD/CDs drive/s. yes!!!!! encore get stuck on the splash /loading screen when is displaying the "Come for the blu-ray, stay for the flash". so here is the fix that worked for me:
Before you try anything else, give the latest drivers (version 4.71) from Adaptec a try. They are supposed to work under 98/ME/NT/2K/XP and don't care if you don't have an Adaptec SCSI card installed. http://download.adaptec.com/software_pc/aspi/aspi_471a2.exe
The first thing to check is to make sure that you have a fully functional set of driver files. Adaptec has produced a tool called ASPICHK which will tell you all about the health and version numbers of the drivers on your system.
when you unzipped the files inside there is a tool called "aspichk.exe". then if you are running XP just double clink on the "aspiinst.exe" , reboot your system and done!!! to ensure that the you new drivers are installed run again the "aspichk.exe".
hope this helps!!! it worked for me like a charm. after trying everything. Adobe Encore CS3 load fast as ever!!! SWEEEET!!!! cheers. Abel"
This is what I read. The only difference is he was working with XP-32 bit. I am running Vista-64 bit. They are not intended for Vista-64. I tried to run http://download.adaptec.com/software_pc/aspi/aspi_471a2.exe before I realized that and it did not work.
I just though this might be of some interest to you folks. I was excited until it woud not work on my system.
Oh well back to the HUNT...

Similar Messages

Can't open Encore CS4 file created on iMac

Is there any way of opening an Encore CS4 project file (created on
a Mac) in the Windows XP version of Encore CS4???
Is this also a problem with the CS5 version of Encore?
Thanks for any help/answers!

Unfortunately no. The NCOR files are not X-platform.
Good luck,
Hunt

Can I OPEN an ISO file in Encore

Cs4 Encore, I have created an ISO file a few months ago , can I open it in Encore and make changes to its authoring?

No, and not even if you had a folder you built to.
You can use one of the iso software drives to mount the iso and pull the individual files (the same result as if you burned the iso to disk and then copied files off it). You can then try to pull the vobs into Encore, or rename and import, or convert. This is not a terrible option if you have the menu files around and do not have the source video files.
In my DVDIt days, I played with their "open DVD" (or somesuch) that allowed this. It added another directory on the DVD and additional files, then allowed you to open that and edit.

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

Why Can't I open Encore in Premiere Pro ?

I'm only 14 days into my Adobe Cloud subscription. Is that why Encore won't open? I tried to send a sequence from Premiere Pro using dynamic link and I tried
to open encore on it's own. Neither way worked. What's my solution?

Right, the splash screen. Right, “not responding” is at the top of the screen. Right, it freezes on the same message all the time. I can’t tell you which one it is any more. When I click on the short cut icon on my desk top or the same icon next to the app in the program window I get the message: “Adobe Encore.exe” that this short cut refers to has been changed or moved. So the short cut will no longer work. I uninstalled premiere pro and reinstalled it. and it reinstalled with the yellow caution sign. When I clicked more details it said “installation complete though some components failed to install correctly. Install couldn’t find “file (seq 261) That was error #DF 012. Error DF 024 said it was unable to preserve original file at “C:\Program Files\Adobe\Adobe Encore CS6\32\Adobe QT32 Server.exe” error 5. Access is denied. (Seq 261. Premiere now works fine but the dynamic link to Encore has Encore grayed out, so it’s not functional.

Why can't I open Encore

I get this symbol when I attempt to open Encore. The same notice apperas after rendering a project in order to burn a DVD

OK, a couple of things to try. Not sure exactly which order I'd attack in, but let's try it this way:
1.) Invoke the error message. Immeditatley open Windows' Even Viewer and follow along with the suggestions in this LINK. It's a PE article, but should apply to En. Might be some worthwhile clues there. You will have to dig around a bit, as these clues will likely be hidden amongst all that cryptic code.
2.) Try a Repair Install from the DVD. You start the install like normal, but once the installer has initialized, and your system surveyed, you should see a list of the programs on the DVD. Check En. This will usually lead to another survey of the installation of En. You should get two options:
a.) Uninstall
b.) Repair Install
It's b.), that you want. If you have missing, or broken .dll's, etc., this should replace them with good ones from the installation disc.
Good luck,
Hunt
PS remember that with the Repair Install, you will first initialize the installer, just like a normal install. Be patient.

Can't open 1.0 projects in CS3 (no subtitles)

After working with Encore 1.0 for forever and a day, I finally got PPro CS3 with its accompanying Encore (running on Windows XP SP2). But I cannot open any Encore 1.0 projects. Trying to open my current project, I get this complaint:
>Encore cannot open Encore 1.0 projects. Open and save the project in Encore 2.0 or earlier, then try again.
A search turned up
this Knowledge Base article. It claims the reason is subtitles, but I have no subtitles in this project (in fact, I have only used subtitles once ever, and this was definitely not that project).
As a test, I tried opening various older project files. In a couple instances Encore CS3 gave the same error as above, but most of the time it simply crashed, with the following "details":
>AppName: adobe encore.exe AppVer: 3.0.0.268 ModName: sonicauthorcore.dll
ModVer: 3.0.0.268 Offset: 004e4e20
The message or crash would not occur immediately, but after the several-second process of "preparing transcode settings", etc. that occurs in a small window with a progress bar, if you know what I'm talking about. So it seems like it doesn't like something about the assets it is processing, but I don't know what, because all these projects are different, and most were started from scratch as fresh projects, with video and menus created independently from other projects (some menus created within Encore 1.0, others using Photoshop CS2; some video streams brought in as AVI, others as MPEG2-DVD).
Ironically, if I try to open the only project I have that actually
does have subtitles, Encore CS3 is the most civil, and in theory it might even successfully open the project. It says:
>This project contains subtitles in an older format. Opening the project will convert the subtitles to the new format, but the subtitles will no longer be compatible with the version of the software used the create them. Would you like to continue opening the project and perform this conversion?
I chose not to "continue" until I know more about why Encore is crashing, because it might convert the subtitles and then crash! But one unique thing about that project (besides the existence of subtitles) is that the solitary video stream is a VOB file from a DVD previously burned, rather than the more typical MPEG2 or AVI. I have no idea if any of this information matters, but I'm telling you everything I know.
Does anyone know what might be causing the problem, particularly with non-subtitled projects, and/or a solution or workaround? I own no version in between 1.0 and CS3, so I can't save it 1.5 or 2.0, which is the only other action suggested by the KB article besides removing my non-existent subtitles...

In followup:
This is a distillation of the process for converting a Project from a previous version of Encore to a newer version remotely.
The problem: a user had Encore 1.0 and needed to get the Project into CS4. They did not have any intermediate version of Encore. The Encore 1.0 Project was shipped to me, to convert it in Encore 2.0, so that CS4 could deal with it. Because the computers were a few thousand miles apart, we had to do more than just Open the Project in Encore 2.0. This would be all that would be required if the versions were on the same machine, or over a LAN and just in different offices.
The entire folder structure is required. The Project will be in a folder (Ill call this the Mother Folder) with the .NCOR file, and then a series of Child Folders below in the hierarchy. The exact names and the exact folder hierarchy is extremely important, as is the placement of some of the necessary files. The name of the .NCOR and the first level of Child Folders must match exactly. The structure is the one we see with each Encore Project:
Mother Folder with .NCOR
Child Folder Level One (same exact name as .NCOR with the
two files:
i ProjectPrefs2.xml &
i ProjectWorkspace.xml
Child Folder Level Two Cache with file mlf.cache.v7"
Child Folder Level Two Sources
Child Folder Level Three Menus with Menu .PSD files
In this case, the folder structure, with Menus and all files, except Video and Audio Assets were shipped to me. All Transcode files, etc. were also omitted.
Once the .NCOR (older version) has been Opened in the later version, a Save_As will create a new Project with folder/file structure. This entire structure needs to be in place on the machine with the newer version to allow it to be Opened. In my case, this complete structure was archived in WinRAR as a .RAR file and shipped out.
All of this is probably very obvious to most others. Again, if one is working on the same machine, or a LAN connected set of machines, it is a lot easier. Im just listing the steps and requirements, should Encore Projects be Opened on remote machines, whether for testing or for conversion.
[I just hope that the formatting of this doesn't get "pear-shaped," when posted]
Hunt

Can't install Encore...

I get an error when I try to install Encore:
"Update failed. This update is not applicable for you."
What is wrong?

I see so you are trying to install the update to Encore 6.0.2 then? Have you tried opening Encore and selecting Help>Updates?
If you continue to face difficulties with the installation process for the update then the next step will be to review your installation logs. You can find details on how to locate and interpret your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Yahoo. When I try to open my mail I can see the folds but can't open the individual mail.

I see the folder with empty displayed on the right but I can't open the mail.

Do it manually to see if Encore works... export MPEG2-DVD from PPro (if for a DVD, or appropriate assets for HiDef) and then import the 2 (audio and video) files into Encore for authoring
Run as Administrator http://forums.adobe.com/thread/969395 fixes some problems
Specific to CS4, you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download
Dynamic Link Problems... and a possible fix http://forums.adobe.com/thread/1325281

CS5 open Encore 1.5 Project

Is there anyway that Encore CS5 can open a Encore DVD 1.5 Project, both on a PC?
If not, can CS5 and Encore 1.5 coexist on the same machine?

Welcome to the forum.
I highly doubt that an En 1.5 Project will Open in CS5. I know that a PC En Project, even of the same version, will not Open on a Mac, and vice versa. Now, there have been some users, who have gotten a slightly older version's Projects to Open in later versions, and I actually was able to Open a simple En CS3 Project in EncoreDVD 2.0, with but a few little glitches.
As for the coexistence of multiple versions of En, with most Adobe programs, that is seldom an issue. The general wisdom is that one should install the older version first, and then the newer version. I do not recall reading of multiple versions of Encore, however. Maybe others can comment on the possibility, or on the limitations. Since En is built around the Sonic AuthorCore modules, there could be conflicts, that do not exist in other Adobe apps.
Wish that I knew the definitive answer, but good luck,
Hunt

Can't open saved project

Hi,
I'm having problems trying to open saved encore projects. I get an error message saying "The player used to create the project could not be found. Defaulting to the Adobe player". When I click OK the program then either freezes or crashes.
I'm using Windows 7 64 bit and have all the latest downloads installed for both Encore and the computer itself, including display drivers.
Can anybody suggest what I might be doing wrong?
Many thanks,
Brian

I now find I can't open a new project either.
Here is the problem summary:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Encore.exe
Application Version:    5.0.0.342
Application Timestamp:    4d83fd30
Fault Module Name:    Adobe Encore.exe
Fault Module Version:    5.0.0.342
Fault Module Timestamp:    4d83fd30
Exception Code:    c0000005
Exception Offset:    0007e2a1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    2057
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e7
Any ideas?

I cannot open encore cs4

When I start encore cs4 I can only open old projects. It will not let me start a new project or import from premiere pro using dynamic link. I just get the start up screen when I name the project the open project new project and whats new dialog box keeps popping up.

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
If Dynamic Link doesn't work, export MPEG2-DVD out of PPro and import the 2 (audio & video) files into Encore for authoring
Specific to CS4, have you updated the Roxio component?
http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Opening Encore 1.x projects in Encore CS3

Does anyone have a plug-in, tool, workaround, or app that can convert older Encore DVD 1.x projects into something that can be opened by Encore CS3? My company kind of waited 4 years despite my advice to upgrade our video editing suite, and we've thus made the jump from Encore 1.0 to CS3. None of my old projects will open unfortunately, and I'd like to update them to use some of the improved features.
I suppose I could re-install 1.0.1 as a compromise, but I'm afraid it may interfere with the CS3 software already installed...anyone know if the two can co-exist nicely together?
Thanks in advance!
Pete

Easiest step is what John suggests.
I'm not surprised that an Encore 1.5 project won't open in EN 5.1. But it is interesting to speculate as to why.
For one thing, the pars changed at CS4. I wouldn't expect that to crash EN, but who knows.
You can experiment by creating a new EN CS5.1 project, importing the menus from the old project folders, then import as timeline the old transcoded assets. If that works, then work on navigation.
Starting over is not that bad if your navigation is not complex.

I downloaded printmaster 2011 but i can not open it

i downloaded printmaster 2011 and now can not open it. I received a note saying that the JVM could not be started. The maximum heap size (-Xmx) might be too large or an antivirus or firewall tool could block the execution.

Sorry, that isn't a Firefox support issue.
Try technical support for Broderbund products: <br />
http://support.encore.com/technicalsupport/
Or peruse the support articles for Printmaster 2011: <br />
http://support.encore.com/technicalsupport/product_detail.aspx?product_id=2642
One question I have for you is what version of Java is needed for that application? <br />
The '''Java Plug-in 1.5.0_05 for Netscape Navigator (DLL Helper) ''' that you have installed is an old version. Maybe you need a 1.6.0 version?? Also known simply as Version '''6'''.<br />
http://www.java.com/en/download/manual.jsp

Can not open, view inbox in godaddy web mail

I have been using godaddy webmail for awhile - one day I tried to view my emails and I could not. I can't open them or reply to them or even highlight "inbox". I have avg - they disabled the firewall and viris protection but the problem prosisted. I called godaddy, the ran a check of their system and said it's working properly and it was a problem with my browser. I am able to compose and send emails if I type in a address.

That worked fine in Firefox after Comcast instituted that Xfinity interface last spring, then they fixed something else and broke that for some Firefox users. Connect Lite still works fine.
Using IE, once you're in the full email page open Preferences -> General in the Xfinity menu header and select Xfinity Connect Lite. Then try it in Firefox.
Or, click on the first new email on the preview page, and when you're done with it click on the Inbox link in the Nav Menu in the left column to get your complete Inbox.

Can't open Encore

Similar Messages

Maybe you are looking for