Can't open file after upgrade to 10.8.1

I use Indesign CS5(Trad. Chinese version). When i upgrade to 10.8 is no problem, but when i upgrade to 10.8.1 last week, i can open any previous ID document! Even i create a new document , i close it , & also cant open!! Its shows a dialog box means the file crash before, selection is fix ,cancel or reopen, but any select also can fix & cant open !!!
Finally i downgrade to 10.8 from my Time Machine, everything gonna OK again!!!
Will Adobe fix this problem? or i cant upgrade to 10.8.2...10.8.3....etc any more!!

Why don’t you ask Apple? It was their update that broke it.
And I would not count on any updates to CS5. It’s two version out of date.
FWIW, that 10.8.1 update helped a lot of people having problems with CS6.
Bob

Similar Messages

  • Can´t open LR after upgrade to 5.3 without entering a licens key

    Can´t open LR after upgrade to 5.3 without entering a licens key

    I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

  • Can't open Pages after upgrading to snow leopard on 10.6.8

    Can't open Pages after upgrading to snow leopard on 10.6.8

    Has Spotlight finished its indexing?  Check in the upper right.  If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

  • Can't open iWeb after upgrading to iLife 11 (Domain.sites2.)

    I just upgraded my iLife package from 09' to 11' just a few days ago. Since then I haven't been able to open up iWeb (09'). I realize that the iLife 11 upgrade shouldn't have harmed iWeb 09', but it's the only change/add that I have done to my machine in the past week. Every time I try to launch iWeb either from the dock or from the domain file itself, I receive the following iWeb error:
    Can't open file "/Volumes/Macintosh HD/iWeb/Domain.sites2."
    Has anyone seen this problem?

    MACTr@KkeR wrote:
    Can't open file "/Volumes/Macintosh HD/iWeb/Domain.sites2."
    Did you move the Domain.sites2 file to that location? ...It can be moved, but most peopIe leave it where it usually resides and would see an error msg saying:
    "Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
    You could try moving your Domain file to the above location and double-click it there. And remember to always backup all your Domain files before messing with them.
    By the way, rather than posting a P.S. in your Public Profile:
    "i've tried repairing permissions on the domain file with Batchmod as well."
    ...you can edit a post within 15 minutes of posting — just click on the pencil icon in the post or reply you want to edit. Then make your changes and click on the Edit Message button to post those changes. Each edit re-starts your 15 minute window for re-editing. (If you're outside the 15-min. window, simply post again.)

  • Can't open file after Keynote crashed

    I was working on a large Keynote file (about 130 Mb), when Keynote (4.0.1) quite unexpectedly. It happened a few times before, and I thought it was because of the instability of the new Leopard system. This time, however, I could not open the file after the crash. An error message was displayed: "Can't open file" followed by the path and the file name.
    Does this happen to anyone else? Can anyone help? I hate to lose the work and go back to an early version.

    Keynote and Leopard, especially in their newest iterations, are remarkably stable. That said, no file, program, or OS is totally immune from corruption. Whenever a program, or worse, your Mac, even starts to behave strangely, your first step ought to be to attend to it with a good fixit utility. Repairing permissions is usually fruitless, since it's highly unlikely there's a permissions problem. You already own *Disk Utility*, so you should try to repair the disk with that. Unfortunately, DU's disk repair is pretty wimpy, often unable to repair a problem, or erroneously reporting no problem when one obviously exists.
    So, if you own a Mac, you owe it to yourself to buy at least one (but better, two) industrial-strength utility. There are really only three to choose from:
    1. DiskWarrior is an absolute must. It's unbeatable in rebuilding the directory, and the directory is usually what's corrupted. It can now fix files, too, which is also helpful.
    2. *TechTool Pro* is an excellent suite of fixits - directory, files, defrag, and some hardware tests. It also has a wonder feature, the eDrive. This is a small (10GB) bootable partition on your boot drive which has, among other things, TTP on it. If your main boot partition has a problem, you can boot from here and usually fix things. AFAIC, it's an absolute must on a laptop which you take on trips, far from your collection of fixit disks. You can also put DW on this partition, so you have everything you need right at your fingertips.
    3. *Drive Genius* is a relative new-comer, also a good suite of fixits, and, I believe, does backups, too.
    I have 1 and 2, and that has saved me from catastrophe more than once. 1 and 3 would probably be good, too. (You ought to have more than one of these serious apps because one can sometimes fix something another can't - different proprietary algorithms.)
    One last thing: if you have anything on your computer it'd break your heart to lose (and who doesn't), remember +The First Rule of Computing+: There are two kinds of computer users: those who have already lost all their data at least once, and those who have not yet lost all their data at least once. So: *backup, backup, backup*. I vote for bootable clones, done often (at least daily if you work daily), TimeMachine is pretty good, and there are other options. Pick one, and do it religiously.

  • Can't open Finder after Upgrade to Yosemite 10.10

    After the Upgrade to Yosemite 10.10 on my MacBook Pro with Retina Display i can't open the Finder and it says it's not reacting. The bar on top when i'm at the Desktop is also gone.
    Can somebody help me ?

    I had this exact same issue, and I was just able to fix it (at least for now).  I'm not an expert by any means, so I can't tell you why my solution worked, but if you follow it and it helps, then great.
    First, you'll have to restart your computer and open in Safe Mode.  Restart the computer and as soon as you hear the startup noise, press and hold the Shift key.  Release it when you see the Apple icon.  It will take a little longer to start up.
    Then download and install the free software called OnyX.
    Once installed, open OnyX and click on the Verifying tab, then click on the Preferences tab. Run the Check button at the bottom.  If it tells you that you have any damaged files, double click them on the list, one at a time, and then delete those files.
    Then I clicked the Scripts tab, and Executed all three scripts.
    Finally, under the Cleaning tab, I clicked on System and executed everything except "CUPS jobs".
    I then restarted my computer like it suggested (without opening Safe Mode) and everything was back to normal!
    Hope this helps.
    Edit

  • Can't open project after upgrade

    Hi
    After upgrading from iMovie 9 to iMovie 11, i have a project that i can't open any more. When i choose it in the project library the preview window freezes and the "edit project" button fades out so that I can't open it.
    Any one else got the same problem or know how to fix it.

    Hi I have the same problem. Did you manage to find a solution?
    Thanks

  • Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

    I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
    Having received the servers I had installed Oracle (ODI) product on it successfully.
    Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
    As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
    a) Modify /etc/ssh/sshd_config to comment the below line:
    #Subsystem sftp /usr/libexec/openssh/sftp-server
    b) Add below lines:
    Subsystem sftp internal-sftp
    Match Group sftponly
    ChrootDirectory %h
    X11Forwarding no
    AllowTcpForwarding no
    ForceCommand internal-sftp
    Then lastly, Restart sshd services complete the configuration
    # /etc/init.d/sshd restart
    apssvrX server current details are as below:
    apssvrX$ uname -a
    Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrX$ ssh -V
    OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
    I tried the DISPLAY variable setup as well but to no use.
    Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
    apssvrZ$ uname -a
    Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrZ$ ssh -V
    OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    Please advise the way forward.

    Tried but still same error.
    Affected servers's sshd_config is as below:
    [root@apssvrX]# cat /etc/ssh/sshd_config
    # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    #Port 22
    Protocol 2
    Protocol 2
    #AddressFamily any
    #ListenAddress 0.0.0.0
    #ListenAddress ::
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 768
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    SyslogFacility AUTHPRIV
    #LogLevel INFO
    # Authentication:
    #LoginGraceTime 2m
    PermitRootLogin without-password
    #StrictModes yes
    #MaxAuthTries 6
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile .ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    #PasswordAuthentication yes
    #PermitEmptyPasswords no
    PasswordAuthentication yes
    # Change to no to disable s/key passwords
    #ChallengeResponseAuthentication yes
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    GSSAPIAuthentication yes
    #GSSAPICleanupCredentials yes
    GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication mechanism.
    # Depending on your PAM configuration, this may bypass the setting of
    # PasswordAuthentication, PermitEmptyPasswords, and
    # "PermitRootLogin without-password". If you just want the PAM account and
    # session checks to run without PAM authentication, then enable this but set
    # ChallengeResponseAuthentication=no
    #UsePAM no
    UsePAM yes
    # Accept locale-related environment variables
    AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
    AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
    AcceptEnv LC_IDENTIFICATION LC_ALL
    #AllowTcpForwarding yes
    #GatewayPorts no
    #X11Forwarding no
    X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #ShowPatchLevel no
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    # no default banner path
    #Banner /some/path
    # override default of no subsystems
    Subsystem sftp /usr/libexec/openssh/sftp-server
    ## Commented the sftp jailing configuration
    ##Subsystem sftp internal-sftp
    ##Match Group sftponly
    ## ChrootDirectory %h
    ## X11Forwarding no
    ## AllowTcpForwarding no
    ## ForceCommand internal-sftp

  • Can't open files after update to Adobe Reader 10.1.1

    I have Windows 7, 64 bit.  I recently relented to constant requests to update my Adobe Reader 9.0 (free vers.) to Adobe Reader X.  The update erased my former version. Now I can't open any of the .pdf files as it says "the network path was not found."  I tried the  Repair installation, it just installed Adobe Reader 10.1.1, which I assume is the same as the X version.  How do I get Adobe Reader to open my .pdf files?

    Try running the combo update.
    10.9.5 Combo Update
    If that doesn't work, try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About

  • Can't send files after upgrading!

    Please help! I just upgraded to Tiger from Panther, and now I can’t send files with iChat. I followed Apple’s instructions about opening up port 5180, but I had to create the AOL IM option because it didn’t appear in my choices. I really need to be able to send and receive files—and keep my firewall running. Thanks very much. Peace.
    iBook G3, 1.42 Mac mini G4 DVD±RW   Mac OS X (10.4.8)   640Mb SDRAM, 1gb DDRAM

    hi Muzikjunky,
    Ok. Sometimes if you have a modem or router that requires you list protocols when doing Port Forwarding it seems to get confused that port 5190 is open to TCP and UDP. Some devices just seem to work better if you do the stuff below.
    If this is the case then go to iChat > Preferences > Accounts >AIM account > Server Settings tab and change the port to 443
    This can only be done when you have logged out of AIM.
    Log back in afterwards.
    9:08 PM Wednesday; February 14, 2007

  • Quicktime Can't open files after 10.4.10 update

    I thought I had escaped all problems after installing the 10.4.10 combo updater, repairing permissions, etc. But today while trying to watch the iPhone Guided Tour video I discovered that Quicktime can't open it, nor anything else for that matter. Can't open audio files of any type, nor any video format. I have the current version of Quicktime, and after reinstalling it and reinstalling the combo updater, the situation remains broken. Quicktime Player will launch, but only to an error message :"Error Opening Movie. The movie could not be opened."
    Curiously I can watch the iPhone movie in iTunes. And all other audio formats supported by iTunes play as usual. Any suggestions?

    Hey Douglas,
    Would you mind expounding on this .... there is more than one Library.
    In the "main" (not the house user library) I did find a file in the Quick Time folder "Toast Video CD Support.qtx", and I removed it (that was the only file in there). Still getting the gray ? mark.
    Trying everything suggested in this forum and then some ... no good.
    did you try removing 3rd party codecs from the
    /Library/Quicktime folder to see if one of them has a
    conflict with the update?

  • Can't open file after editing video in CS5

    I have now tried editing a video file three times in PHotoshop. Each time it has frozen during export, and when I Force Quit and try to reopen the file I get an error message that I can't open this format of document with my version. I have an Education version of CS5, so I have the Extended version of Photoshop. This is driving me crazy. Any ideas?
    Garrett

    Found another related thread and the tip to confirm that PS was up to date. After updating the file worked.
    Finding the right answer in here takes too much work (or did I miss the way to search for answers?). Lots of posts on this topic, but only one helpful answer that I found.

  • CAN'T OPEN FILE. must upgrade plugins or to latest version?

    hi all
    im new to Indesign.
    im trying to open files sent by client.
    we both use CS2 version.
    When i go to open the file, I get a message box CANNOT OPEN FILE.
    then there's a large list of things ending in .framework
    and underneeth is a "!" and the message : cannopt open file.indd. Please upgrade
    your plug ins to t heir latest versions or upgrade to the latest version of adobe indesign.
    how do I do this? is it free somewhere?
    Please advice
    thank u

    Make sure you are fully upgraded to the latest update of InDeisgn. I believe that is 4.0.5.688. And make sure your client really is using CS2 and not CS3. If they are using CS3 have them export an INX file for you. If you are certain they are using CS2 and problems continue, try the INX route anyway.
    It is a very bad idea to continually transfer files between CS2 and CS3 users. If it turns out the client has CS3 then you should try to limit file transfers as much as possible or upgrade to CS3 yourself. You can install a free 30 day demo, which might last you long enough to finish this job.

  • Can't open iPhoto after upgrading computer

    Hello!
    I have an old iBook G4 that crashed a few weeks ago. I couldn't rebuild it so and got Mac OS X Leopard Version 10.5 and installed it. I transferred everything from my iMac (latest model) including photos. Then I got my old iLife '06 and installed iPhoto to the iBook (which was on there before it crashed). I did all the software updates and now have iPhoto 6.0.6 installed.
    However, when I try to open iPhoto I get the following message:
    "You can't open your current photo library using this version of iPhoto.
    You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
    I can see all my photos in finder under 'All Images'. When I click on a photo the path is
    username - pictures - iPhoto Library - Originals - Year - Date - photo file name
    However, when I go to finder and click username - Pictures and then iPhoto Library there is nothing there.
    How do I get to open and import my photo library?
    Thanks,
    Julia

    Julia
    As the new iMac has a later version of iPhoto it sounds like the Library has been updated, and the old iPhoto 6 cannot open it.
    Your choices are
    1. Update iPhoto on the older machine
    2. Rebuild the library for iPhoto 6. To do this try use iPhoto Library Manager.
    Regards
    TD

  • Can't open files after canceling sub

    I tried the Creative Cloud on a trial basis and then canceled. The problem now is that the latest Adobe Reader, which is no longer operating on my computer, is still the default program when I try to open a PDF. It won't let me open files. I have an older program that works. How do I make this the default reader?

    Hi saranac laker,
    Right click on any pdf file/go  to properties/In general tab select open with and change Acrobat, select Reader as a default application to open the pdf files.
    Regards,
    Romit Sinha

Maybe you are looking for