Can't open file i created yesterday v5.5 .psd

I just created yesterday a .PSD 5.5 file on an HP (64 bit, etc), and now I can't open it. Message says not compatable... I am using a trial version of CS5.5, but still have 15 days left. Couldn't open on a mac iin CS4 either.
Don't remember if I had "maximize compatability" on or not.

Seems to be several posts with the same problem on this page. No solutions offered yet. Keep track of those post also.

Similar Messages

AE 13.1.1 can't open files previously created

AE 13.1.1 can't open files previously created, running OSX 10.10.1, have tried restoring with time machine and reinstalling the app, but all didn't work.

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Can't open files or create new files in photoshop CS6

Urgent!
Since I updated photoshop, when I click New or Open File photoshop behaves like I didn't click anything.
But otherwise reacts to anything else I click on.
What is wrong?

Without system info or other details we can't tell you anything. Most likely this is a permissions issue where PS cannot access the templates for new documents or other configuration data nor may it be able to create its swap files. Look into that and verify your file permission as well as turn off security tools that may block this stuff. also run as admin to test.
Mylenium

DVD-SP on MBPro - can't open file or create buttons in new one

This is quite bizarre.
I've recently installed FCS2 on a new MBPro - latest OS, QT, etc...
For some reason, I can't create a button on a menu. I can't drag to create one - it never even shows the box. When I drag a shape on and choose "Create Button" - nothing happens.
When I try to open an existing project from another system, it hangs up during "Loading Menus".
I've even deleted the APP, the PREFs, and the RECEIPTS, then re-installed the program from scratch - and the exact same thing happens.
Any ideas?

Without system info or other details we can't tell you anything. Most likely this is a permissions issue where PS cannot access the templates for new documents or other configuration data nor may it be able to create its swap files. Look into that and verify your file permission as well as turn off security tools that may block this stuff. also run as admin to test.
Mylenium

Can't open file I created in numbers

created a file in numbers a couple days ago now when I'm trying to open it I get a message that says it can't be opened and I must buy a new version.I don't understand since i'm trying to open in the same computer and same numbers program I created it in. Am I being forced to buy the upgrade ?
Don Hoechstenbach
[email protected]

This is confusing to a lot of people. When you downloaded the new version of Numbers (or it was downloaded automatically for you because you have automatic updates turned on in System Preferences > App Store) the old version remained on your Mac. The new version is in Applications. The old version is in a subfolder within Applications.
The icons look similar so it's easy to think you're trying to open a document with the new version whereas in fact the old version has been activated and is trying to open it, giving you message that you need to upgrade.
If you tend to open documents from Finder then right-click and Open With ... Numbers.app (3.0).
Or you can open Numbers 3.0 (the one in the Applications folder, not the iWork '09 subfolder) and open the document from there.
Any icons you had on the Dock before the upgrade are of course still pointing to the old version.
SG

I can not open files created in iWork 6 or iWork 8 with pages 5.2. I removed the older versions and emptied my trash. what to do?

i can not open files created in iWork 6 or iWork 8 with pages 5.2. I removed the older versions and emptied my trash. what to do?

Reinstall iWork '08 which can export to Word .doc/x files.
Peter

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Iweb installed on a new computer but i have this error message: Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

I have just installed ilife on my new computer from my disk. I have several backups of my webpage from my old computer. Everything would be great if I could just run the program. When I click the icon for iWeb I get the following message: Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
Somebody please help! I desperately need to update my website.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Error message: "Can't open file"

Using Keynote 3.0.x I try to open a keynote file created a year ago and when I try to open the "Opening" dialog comes up, you see the progress bar, and then, I get the error message, "Can’t open file" followed by the file name. Any recourse?
PowerMac G5 Mac OS X (10.4.7) FInal Cut Pro 5.1

I later discovered the file was damaged. Went back to a backup copy and things were fine. Good think we have backups.

Error message: "Can't open file "[File path, file name].key"

If I attempt to open any Keynote files, I now get this error message.
"Can't open file "[File path: file name].key"
To clarify, the text in the square brackets above would be the file path and then the file name.
The file then will appear on the screen, but is unresponsive to any clicks or menu commands.
The files will open successfully on other Macs, so they aren't corrupt.
Also - I've just checked, and opening Keynote and trying to create a new presentation leads to the same problem: All screen menus / buttons are dead - all I can do is drag the window around the screen.
I've tried to reinstall Keynote, but this hasn't resolved the problem.
Is there some corrupt preference file (or similar) that I need to get rid of? Is there an easy way to do a complete uninstall of Keynote so I can try another install? Or is this a symptom of something else?
All ideas gratefully appreciated!
Message was edited by: Brendan Donlon

All the issues I describe in my questions around this time re: Keynote were actually symptoms of a soon-to-die laptop. The Hard Disc was corrupting, and Keynote was the first application to be affected.

Can't open files from iCloud Drive on Mac

Hi,
Can't open file from iCloud Drive on my MacBook Air (OS X 10.10.1).
I created new file (in Numbers for example). Then Numbers->File->Open->iCloud Drive->my_file.numbers and it says "Can't open file my_file.numbers".
I can preview the file by pressing Space, but openning from application and double-click on it doesn't work.
Files that were created earlear also not opened.
Does anybody know how to solve this problem? thanks.

Using smtp.mail.me.com - also tried smtp.me.com
SSL yes
port 587
SMTP Authentification Yes
Security SLS/TLS - also tried STARTTLS
User full **@me.com email address - also tried user name without @me.com
I have spoken to apple support this afternoon and we tried the variations shown above.
Support told me to wait for a day and try again!
After the iCloud authentication problem last night I changed all my passwords I wonder if there is an SMTP problem at me.com perhaps not reading the updated passwords?
I'll try and use the old passwords later.

Numbers 3.0.1 - Can't open file "Work.numbers"

Hello, all Community!
Here's a iWork Numbers file, edited and successful saved yesterday to local folder, named Work.numbers.
Today this file not opening anymore. Number's says: "Can't open file ..." And just one button "OK".
In system log here's next lines:
iTrancemind # tail -F /var/log/system.log | grep Numbers
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3019
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 468721
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #1: __97-[TSPObjectContext readWithReadCoordinator:finalizeHandlerQueue:rootObject:error:readCompletion:]_block_invoke TSPObjectContext.mm:1129 Could not read document object with error: Error Domain=com.apple.iWork.TSPersistence Code=1 "Произошла ошибка при чтении документа." UserInfo=0x600001069600 {NSLocalizedDescription=Произошла ошибка при чтении документа., TSULocalizedErrorAlertTitle=Произошла ошибка при чтении документа.}
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #2: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #3: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
What I done to try resolve this problem:
1. Checked permissions and repaired.
2. Tried to open file in iCloud web-editor - no result. iCloud says that it can't open this spreadsheet.
3. Tried to convert file via some online file type converters to xls document (i will not put link here). Converter says that I have wrong file format.
Also I tried to open file in some other programs. No luck.
That's all.
File Work.numbers has been closed correctly and was no errors. Unfortunately, we have no any backup copy of this file anywhere. I know, this is stupid, but question now: How can I repair this document? Is any repair tools for iWork files?
The file seems like has right structure.
iTrancemind # ls -la Work.numbers/
total 4776
drwxr-xr-x@ 8 max staff      272 30 дек 16:44 .
drwx------+ 19 max staff      646 30 дек 17:53 ..
drwxr-xr-x@ 2 max staff       68 30 дек 00:28 Data
-rw-rw-rw-@ 1 max staff 2306978 30 дек 00:28 Index.zip
drwxr-xr-x   5 max staff      170 30 дек 14:47 Metadata
-rw-r--r--@ 1 max staff     1690 30 дек 00:31 preview-micro.jpg
-rw-r--r--@ 1 max staff    13602 30 дек 00:31 preview-web.jpg
-rw-r--r--@ 1 max staff   112911 30 дек 00:31 preview.jpg
Unzipping Index.zip is passing without errors. It has many "iwa" files with binnary content and I can't get data from it. But, data in that file is very important for one person.
Could anybody help me to resolve my problem to restore Numbers document?

Hi rabg,
I am using OS X 10.8 on a Mac. This may be different if you are using iOS.
Does Numbers'09 still exist in your Applications folder? Maybe inside a new folder? Perhaps you could use Numbers'09 to open your documents.
Regards,
Ian.

[Solved][VIM] E484: Can't open file syntax.vim

Hi all,
I've installed Archlinux few days ago on my netbook and yesterday i decided to configure Vim using plugins.
During plugins configuration, i messed up and i decided to revome all Vim files in my ~ folder in order to restart configuration.
However, since I've executed the `rm -R .vim .vimrc .viminfo` command, I can't re-activate Vim's syntax coloration using `syntax on` into my .vimrc file nor into Vim directly.
Here is the error message when I start Vim :
Error detected while processing /home/romain/.vimrc:
line 1:
E484: Can't open file /home/romain/.vim/syntax/syntax.vim
Press ENTER or type command to continue
I've found this topic on BBS which seems to be the same problem as me but reinstalling vim or vi doesn't solve this problem.
I've tried to copy this syntax.vim file from /usr/share/vim/vim73/syntax/syntax.vim but it doesn't solve the problem and I want a clean solution without hacking my ~ folder ; moreover, this bug also appears being root while I haven't configured vim with the root account so it may be a problem into Vim's installation folders or something.
Thanks for your help and sorry I my english contains mistakes,
MicroJoe.
Last edited by MicroJoe (2012-06-14 16:16:45)

This is the output :
VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Jun 7 2012 00:41:40)
Rustines incluses : 1-547
Compilé par ArchLinux
Grosse version sans interface graphique.
Fonctionnalités incluses (+) ou non (-) :
+arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent
-clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments
+conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs
-dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path
+find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv
+insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent
+listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape
+mouse_dec +mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse
+mouse_xterm +mouse_urxvt +multi_byte +multi_lang -mzscheme -netbeans_intg
+path_extra +perl +persistent_undo +postscript +printer -profile -python
-python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent
-sniff +startuptime +statusline -sun_workshop +syntax +tag_binary
+tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title
-toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo
+vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp
-xterm_clipboard -xterm_save
fichier vimrc système : "/etc/vimrc"
fichier vimrc utilisateur : "$HOME/.vimrc"
fichier exrc utilisateur : "$HOME/.exrc"
$VIM par défaut : "/usr/share/vim"
Compilation : gcc -c -I. -Iproto -DHAVE_CONFIG_H -I/usr/local/include -march=i686 -mtune=generic -pipe -fstack-protector --param=ssp-buffer-size=4 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1
Édition de liens : gcc -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -L/usr/local/lib -Wl,--as-needed -o vim -lm -lncurses -lacl -lattr -lgpm -ldl -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -fstack-protector -L/usr/local/lib -L/usr/lib/perl5/core_perl/CORE -lperl -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
(I've noticed that some part were in French but I hope that it'll not be a problem).

Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

Hello,
I have been using iWeb for over a year and I have a lot of my work on it. But for some reason, when I went to open iWeb, I get the error message:
+Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”+
Does anyone know how I can fix this and make sure my content doesn't get deleted?
Thank You!

Deleting the preference file does not affect the domain.sites2 file. If it's not in the default folder or has a name other than domain.sites2 then that's why iWeb couldn't find and open it. Find it and double-click on it to open it with iWeb 2. You do have a backup copy the domain file, right? If not download and use frequently the Automator application that Varkgirl created. You can get it at Varkgirl's iWeb Tips and Tricks site.

My photoshop will not open files or create new files, please help?

Photoshop CS6 on Windows 7 will not work,
When machine is first started the program works, for about 10 mins, then
I can not open files, create new ones. When it does work it can not perform functions like transform etc.
I tried disabling third party plug ins
I tried creating a new account on my machine
Nothing seems to work.
Can any one shed some light on the problem?
Cheers!

Hudechrome wrote:
Sorry! Ignore it.
There is a script running which Noscript lets me forbid, called akamaihd.net. It runs a script which is the same as in html when you highlight a word then attach a url to it.
I don't know why I am seeing it but not others. FF and Chrome seem susceptible to it. It's not malware as usually thought of because no virus/malware program finds it here.
Unfortunately, I have to forbid this script for every site I visit.
In the other thread where your browser displayed an 'i.trkjmp.com' link which isn't really in the web page, I gave you a Google link for info about the problem. You said that it must be something else. Well, for months now, Chrome and Firefox users have been troubled by extensions which cause the 'i.trkjmp.com' problem. You might want to revisit the link I gave you.

Can't open file i created yesterday v5.5 .psd

Similar Messages

Maybe you are looking for