Can't open files on server in program but can when double click in finder

I have a Mac Pro 2.66. From withing Quark and Illustrator I have trouble opening files that are on a server Mac. They refuse to open. I can open them up by double clicking on them in the finder. This doesn't happen on the g4's and g5 on the same network.

Have you installed the 7.0.2 patch?
Bob

Similar Messages

The hard drive on my MacBookPro crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture!

The hard drive on my MacBookPro recently crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture! Any thoughts on how I can rebuild the iphoto library? Currently I can't even get into it.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Can't copy files to a network share but can copy folders...

I frequently use a network share at work. I can view files off of it fine. I can erase files off it. I can copy folders to it.
However, any time I copy any single file I get the following error.
"The operation can’t be completed because you don’t have permission to access some of the items."
This occurs for every file I've tried. From txt files to jpgs to docs. Everything gives that error and fails. I'm at a loss and it's totally killing my productivity.
It's a linux based share and all permissions on that box are correct. My account can easily copy files from other machines. Also, the fact that files and modifications work on this computer seems to prove that as well. I think it's pretty apparent that the cause of this error is on my laptops end.
I've verified my disk permissions. I have no clue what could be causing this.

Look at this thread for discussion of this issue.
http://discussions.apple.com/thread.jspa?threadID=2382501
Search is your friend.

Mac Client 8.0 - RDP files containing a gateway don't connect when double clicked

The error received by the client is that the machine cannot be found and to fully qualify the name or use an IP address. The name is fully qualified.
I also tried creating a new connection altogether and exporting it (looked at it using TextEdit and confirmed it contained the gateway as well as all the other necessary parameters to connect) - it will not connect (if I delete the connection and gateway
settings from the app) if I double click on the exported connection.
Can this be fixed in the next release?

Hi,
The Gateway setting refers to the RD Gateway. Do you setup a RD Gateway in your network? Are the clients and servers in the same network? If they are, I don’t think we need to configure the
gateway setting here.
What is a Remote Desktop Gateway server?
http://windows.microsoft.com/en-us/windows7/what-is-a-remote-desktop-gateway-server
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Thanks.
Jeremy Wu
TechNet Community Support

NEF files - can't open in Bridge or PS CS3 but can see in camera

Not sure if I'm in the right forum...first time here.
I'm shooting the floods in Brisbane, Australia today and have been shooting with a Nikon D200 and with a Nikon D3.
I have transferred the NEF files from the D200 easily (as I normally do) to Bridge, but am suddenly having problems with transferring the NEF files shot on the D3. They appear as files in Bridge but if I try to open them in PS, the error message is "Could not complete your request because it is not the right kind of document".
I was successfully shooting on the D3 and using the same card less than a week ago. The only difference is that I was transferring to a different desktop, not my laptop, which I have now. I've recently rebuilt my laptop after a major crash, so maybe there's some simple setting I need to change. But, it's odd that I can successfully transfer and open today's NEF files shot on the D200.
Any help/tips would be great!
Cheers
Marc

Great, thanks Ian. This worked a treat. I'd forgotten that I needed to download that again. Cheers. Thanks for your help. Marc.

I can open files on my wireless RAID,but can't find it to save when I create pdfs

I have an external RAID, wireless. I can see it and open the files in it. However when I open a pdf or download a photo, I cannot save it to the RAID. It is not an option. I am fairly new to Mac, so any help would be appreciated. Thanks

If the RAID is formatted as an NTFS Volume (Windows New Technology File System) Mac OS can read it, but cannot write it without third-party software.
The Hatter recommends an NTFS file extender package by Paragon Software.

Citi EO said can't open cards closed for 90 days, but can they re-use closed terms for other cards

I used to have a much-loved 5.99% F Citi TYPref (originally Diamond Preferred Rewards) MC that was closed out by Citi during CARD Act, in 2009, that I have been trying to get re-opened for years now (albeit unsuccessfully) I finally called the Citi EO number today, mentioning the fact that I have faithfully and responsibly repaid over $12k on it over the past some years, but they said that they cannot open cards that have been closed for longer than 90 days My question here though is, if Citi cannot re-open an account closed for that long, do you think they might be favorably-inclined to lowering the interest rate a little on my currently-open Citi TYPref which is at 9.24% V, so that it is even just a little closer to my old closed card; I should have asked during the call I guess but I forgot to ask, at the time? The closed card was prolly my best credit card of all time..."the one that got away", and so I still have quite a bit of nostalgia for it and miss it, to this day The only open cards I still have that even come close to this old card are my FNBO Amex at 6.25% V and my BoA Cash Rewards World MC, at 9.99% F.

galahad15 wrote:
I used to have a much-loved 5.99% F Citi TYPref (originally Diamond Preferred Rewards) MC that was closed out by Citi during CARD Act, in 2009, that I have been trying to get re-opened for years now (albeit unsuccessfully) I finally called the Citi EO number today, mentioning the fact that I have faithfully and responsibly repaid over $12k on it over the past some years, but they said that they cannot open cards that have been closed for longer than 90 days My question here though is, if Citi cannot re-open an account closed for that long, do you think they might be favorably-inclined to lowering the interest rate a little on my currently-open Citi TYPref which is at 9.24% V, so that it is even just a little closer to my old closed card; I should have asked during the call I guess but I forgot to ask, at the time? The closed card was prolly my best credit card of all time..."the one that got away", and so I still have quite a bit of nostalgia for it and miss it, to this day The only open cards I still have that even come close to this old card are my FNBO Amex at 6.25% V and my BoA Cash Rewards World MC, at 9.99% F.Well, you have the FNBO Amex at 6.25%, the Thank You are 9.24%, the Cash Rewards at 9.99%....all very good APRs for rewards cards. The closed card is 6 years old. I highly doubt they will reopen it or even CAN reopen it, regardless of how stellar of a customer you may be. It probably simply can't be done. You do realize that your FNBO is only 0.26% higher than the card you are so desperately wanting to reopen, right? That makes very, very little difference in terms of actual interest payments. Even the existing Citi card is still not even 4% higher and like I said, 9.24% is a great rate on a rewards card. Personally, I believe you are in better shape APR wise than most of us on rewards cards and you should be happy! I'd forget about this old account. It's gone and I would say you aren't getting it back (or the matching APR).

Problem editing - can see thumbnail, but blank when double click on photo

I just upgraded to iLife 08 and encountered a host of problems. I had about 5000+ photos. Now I suddenly have 7000+. There are a ton of duplicates that I don't know what to do with. Moreover, I can't edit my photos. I've changed the preferences around, but nothing works. When I try to click on the thumbnail to edit the photo, a blank page appears. It looks like I can manipulate it, as when I press rotate, the thumbnail rotates. However, I cannot view anything but the thumbnail. Pls help!

victoria:
Welcome to the Apple Discussions.
, a blank page appears.
Is the box gray with an ! in the middle or is it white? If it's the latter then there's a permission issue. Sodownload and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
If it's the former and Terence's recommendation doesn't work you may be looking at starting fresh with a new library and importing the original photos from the old library as follows:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can't open file , error message 1310 & 2203

can't open file , error message 1310 & 2203

reproduce is easy. anytime i click to open an attachment or a pdf file.
it won't open. comes up with notice that adobe acrobat has stopped
working and the program will close. I can go to READER AND OPEN THE
FILE BUT NOT FROM ACROBAT X PRO. RATHER SILLY.
ERROR MESSAGES ATTACHED
THANKS FOR THE ASSIST
Dan Valentine, GRI, e-PRO, MA min
Broker-Owner
Valentine Sales & Management
"Building & Maintaining Rental Portfolios"
"One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
www.ValentineTeam.com
www.ValentinePropertyManagement.com
www.InvestAZRentals.com
12031 N. Cave Creek Rd.
Phoenix, AZ 85020
Cell-Text 602-377-0621
Office- 602-866-0150
Fax-602-926-8260
[email protected]

Include jni.h !! can not open file

include<jni.h> !! can not open file
i wrote a program Test.class and i make Test.h and i make .def and .c, but whan i want to compile .c i have massage: can not open jni.h file

You need to check that the include path for your compiler is set correctly. You must read the documentation for your compiler / platform / IDE to find out how to do this.

Help! Can't open files in all programs since installing version cue upgrade

Please help. A few days ago I got some pop up (I'm in windows XP) saying updates were available for 2 adobe things. I just chose yes and kept working. Now, I can't open files in any of my CS3 programs. I have lost 4 days of productivity and fear losing my mind next!! after doing some research, it appears alot of people are having trouble since uploading some version cue upgrade for cs3. I followed their suggestions and unchecked VC in photoshop (my first offender) and suddenly I could open files again. But now I can't in Illustrator, but in preferences, it does not have VC checked.
I've tried uninstalling and reinstalling the whole package. I've tried just uninstalling VC. Nothing's working and I'm having major deadline problems now.
Please, please help! Thanks.
Anne

You can try a system restore to a point before the update. If you're lucky, it might work, but I often find System Restore will fail when you need it the most.
Peter

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please help

Consider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like t

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me. What fix do you recommend?

Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul

Cannot publish Excel workbook to Sharepoint 2010 : "You can't open this location using this program. Please try a different location"

I am trying to save an Excel 2010 file to a Sahrepoint 2010 document library but keep getting the error:
"You can't open this location using this program. Please try a different location"
Googling this suggests enabling "Desktop Experience" on the server which I have done. Excel Services Application is Started.
Has anyone come across this and been able to resolve successfully? I am wondering if this is more security related but the security set-up looks fine.
Any suggestions?
Thanks

Hi Sally, thanks for the response. Problem is the issue occurs with all users not just me.
On the server-side do you know if the full Office installation must exist for this to work?
The reason I think it may be security related in some way is that on another server we can access one site collection but not another. The first site collection shows the various libraries available and the other gives the same error: "You
can't open this location using this program. Please try a different location".
It's proving to be very frustrating!

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Can't open files on server in program but can when double click in finder

Similar Messages

Maybe you are looking for