Can't open files within illustrator using cntrl+O or file open

I recently upgraded to OSX Yosemite and haven't been able to open any documents/files within illustrator (only from the launch screen). Both cntrl+O and file>open will not allow me to open any files within illustrator. Every time i need to access an existing file I have to quit and launch illustrator again. This is horribly frustrating as I need to juggle between client work. I rebooted my computer and this didn't resolve the issue. Please help or fix this issue.

See your other listing.

Similar Messages

Can't open files within illustrator

I recently upgraded to OSX Yosemite and recently I haven't been able to open any documents/files within illustrator (only from the launch screen). Both cntrl+O and file>open will not allow me to open any files within illustrator. Every time i need to access an existing file I have to quit and launch illustrator again. This is horribly frustrating as I need to juggle between client work. I rebooted my computer and this didn't resolve the issue. Please help or fix this issue.

Did you reinstall all of your Adobe apps after the upgrade to 10.10? Adobe products don't do well with migration but want a reinstall.
Did you mean Cmd-Open. Ctrl is for Windows

Can`t open document on Illustrator but adobe reader and photoshop opens it, why?

Can`t open document on Illustrator but adobe reader and photoshop opens it, it is a problem with the text font Futura T-Bold. How to open it on Illustrator?

I downloaded the file, and:
It is not a Photoshop PDF.
I get the same result attempting to open in Illustrator; mangled font substitution. That's because I don't have one or more of the exact fonts used in the document installed on my computer, and I suspect the same is true of yours.
The fact that it opens without issue in Reader and Photoshop is essentally meaningless, (or at least it's not an inidication that it also should open without issue in Illustrator, which is what your original post seems to imply). Reader displays the correct fonts because subsets of them are embedded in the PDF for use by Reader. Photohop just rasterises the whole page, so there is no font data needed.
If you had the fonts, you wouldn't get the substitution in Illustrator. It works that way for any PDF.

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

After I download an attachment I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

After I download an attachment from my webmail I have to go to the download window and manually open it, my laptop use to download then automatically open the file, how do I get this feature turned back on?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

Is there a way to work with AutoCAD files in Illustrator without saving the autoCAD file back to a 2

Is there a way to work with AutoCAD files in Illustrator without saving the autoCAD file back to a 2007 .dxf file format?

Different versions of Illustrator can import different versions of DXF.
Maybe there's a plugin by hotdoor that might enable you to import the latest version of the file format.

How to open the eps file in illustrator using c sharp?

How to open and save the eps file in illustrator via c#(c sharp)? Is there any c# illustrator reference guide available? Kindly advise me.
Thanks

Pretty easy ...take the vb reference guide and make the modifications accordingly.
A quick tip would be to press CTRL+W and view the Object Browser after adding a reference to the illustrator Type Library... that will give you a pretty neat look about the illustrator object model in visual studio ... i`m not quite aware if a similar option is available within Mono Initiative's designer.
after that is pretty easy.
(it doesn't really make sense imho importing the namespace as "Application" is used in many other namespaces)
add this to your Form1_Load routine:
Illustrator.Application app = new Illustrator.Application();
app.Open(@"D:\Work\msh_3ds.ai", null, null);
hope it help.
cheers;

How do I encrypt my external hard drive and subsequently a specific file within it, using my Mac? I tried creating a disk image but permission was denied.

Encrypting an external hard drive and specific folders within. Permission denied using disk image.

VKP90 wrote:
When I tried to encrypt a single file within the hard drive itself, I got the following: Disk Utility Progress: Unable to create "Name of my file" (Permission Denied).
When I tried encrypting the entire hard disk itself, I got: A GUID Partition Table (GPT) partitioning scheme is required.
I have also currently used Time Machine on the external hard drive, along with saving other data. Hence, I am not sure if partitioning is going to delete any of this (a video I watched mentioned that using the + button when creating partitions retains current data). Backing up the external hard drive is out of the option since it is the back up to my Mac.
You can't encrypt a single file. I'm not sure what you did to try. You can make an encrypted disk image which begins with a folder, if desired. Or, you can just create a blank, encrypted disk image, then move your desired files into that.
While you could partition off the free space without erasing the disk, you cannot encrypt it because you need a GUID Partition table which requires you to repartition the entire drive, not just the free space.

How can I force Time Machine to use existing backup sparsebundle files?

I backed up both my OSX Mountain Lion MBP and MacOSX Snow Leopard iMac to the same USB Disk. I then plugged this USB Disk into my Time Capsule, and configured Time Machine in both macs to use it through the network. But Time Machine insists on creating new backup sparsebundle files, ignoring the existing ones. How can I force Time Machine to use the existing backups.backupdb sparsebundle files instead of creating new ones?

How can I force Time Machine to use the existing backups.backupdb sparsebundle files instead of creating new ones?
You can't. Time Machine works differently over a network than it does with a locally-attached drive. What you could do is delete the folder named "Backups.backupdb" at the top level of the volume, which contains the backups you made via USB. You should then be able to backup to the same sparsebundle locally and over the network. But I wouldn't recommend doing that. Certainly don't do it unless you have at least one other complete backup (which you should have anyway.)

ı can not activate my iphone , even ı use itune it dose not open

ı can not activate my iphone , even I use itunes , it dose not open itself.

There is no such thing as an iTouch.
Besides, why on earth would you buy it and not use it?

Does iCould Control Panel V2 still create new Outlook data files rather than using the default data files already in use?

This has always made iCloud for the PC an impossibility for me, and seems to be just a plain stupid implementation. Moving all the calendar and tasks to a proprietary iCloud data file within Outlook breaks so many other things that I need to use within Outlook. Does version 2 of iCloud Control Panel still work this way?

Yes, just like Microsoft Exchange, Zimbra, Gmail etc.

Can't tab into file list when using column view in the open/save dialogue boxes

Hi,
When in Open/Save Dialog Boxes I can't use tab to select the file/folder list in Column View. Tab will only cycle through Save As, Tags, Search, and the Sidebar. In all the other views (Icon, List, Cover) I can tab into the file list. Is this a bug?
I know that enabling Full Keyboard Access will make this work, but I'd rather not do that since it increases the number of buttons you must tab through to get to the file list.
I'm using the latest version of Yosemite on a 2014 Macbook Air. Thanks.

Hi,
Did you found the solution to this? I'm also trying to do something like you , but I got stuck up in a very primitive stage than you. I'm not getting how I can make that File Download window to appear. Can you help me please.
Thanks.

I can't open an .ai file in Illustrator without a dialog box appearing "Open PDF." I have no idea what I can't open it as an Illustrator file (and not a PDF)

Once I open a page as a PDF, all my layer info is lost. I've tried opening it on two machines and the dialog box continues to appear. Again, it's not a PDF extension.
Thanks for the help!

Since you're sure you saved it back to CS5, the issue might have been caused by saving directly to the server. Illustrator does not particularly like that.
90% of corrupt files are caused by saving directly to the server.
You might try and first copy the file to your harddisk and then open it from there. Opening files directly from the server is an issue as well.

Opening pdf within app using Reader X with Acrobat 5.0 installed

I have Acrobat 5.0 (full version) installed and also Reader X. Acrobat 5 was installed 1st and has been my default. But, I loaded Reader X because Acrobat 5 can't open many newer PDF's. I have gone into Explorer and set Reader X as the "open with" application and double-clicking a PDF in Explorer results in Reader X opening the file. The problem is within various applications which have menu links to PDF's. Many of these still attempt to open the PDF with Acrobat 5. I believe this may be more a Windows XP problem, but thought maybe someone might know what registry item I should look for to correct this problem since it is related to Acrobat.

Adobe doesn't recommend the use of Reader X with anything but Acrobat X. Earlier versions of Acrobat and Reader (any version) will cause problems. Remove Acrobat, re-install Reader X and if needed upgrade to Acrobat X or Remove Reader X and re-install ACrobat 5.

Can't open files within illustrator using cntrl+O or file open

Similar Messages

Maybe you are looking for