Can't Open Final Cut - "Waveform Cache Files Folder does not have read/....
I am new to Final Cut and macs, so please bear with me.
I have created an animation in Final Cut pro (5) using stills. The project takes up a lot of space, which is why I have moved the 'Final Cut Documents' file onto my external hard drive. However, I relocated/reconnected the project files when I next opened the project and all was peachy.
Last night when I had the project open I got errors about not being able to save the project. This was my first problem, but is now insignificant compared to this new problem this morning:
I cannot open Final Cut. I have an error saying 'The Waveform Cache Files Folder does not have read/write access. Please select a new folder in the System Settings Dialog or correct the problem on disk'. Final Cut then proceeds to shut down, so I cannot change any user settings within the program.
I have made all Final Cut folders read/write as well as my external hard drive and anything else with Final Cut on it. It still presents this warning.
A final confession: last night in (I think?) User Preferences I changed some of the settings to my external hard drive (I'm not even sure what settings...I just checked boxes next to the Hard Drive and unchecked a box next to the laptop drive), hoping it would just save the project to it, rather than on my laptop. This may have contributed to this new problem...maybe not.
PLEASE HELP...this animation is due Monday.
Thanks for your reply - it sounds like it will work, but I can't delete one of (yes, I made multiple copies, but have been able to delete the others) the Waveform Cache Folders as it comes up with the error "The operation cannot be completed because one or more required items cannot be found. (Error code -43)." Is this the cause of my problems? How do I fix it?
Similar Messages
-
File transport does not have read/write privileges for receive location???
Hi all.
I try to read an EDI-file from a file location.
In configured the receive location but when I enable it I get an error message in the log saying:
File transport does not have read/write privileges for receive location "Location" (Event ID: 7183)
The location is correct (I used the browse option) and the folder is shared with all users (full access for everybody).
How can I get rid of this errorThere can be many reasons for this error. First of all try the KB article http://support.microsoft.com/kb/888498 . Then try the solution on this link http://bluebiztalk.blogspot.com/2008/05/file-transport-does-not-have-readwrite.htmlAbdul Rafay
http://abdulrafaysbiztalk.wordpress.com/
Please mark this as answer if it helps -
Can't open Final Cut X - Stop Responding with Event
Im working on a project for over a year, and suddenly I can't open Final Cut with my project and event.
It stops responding while loading my event.
I already changed the location of the biggest files (original media and renders), so I just have my event and my project files on the final cut folders.
I've tried to open this in another computer, but it still didn't work.
When I erase my event and project, there's no problem with Final Cut.
Any suggestion?
Thank you!Why are you moving folders around?
Was FCPX acting abnormally before you moved these folders?
What do you mean by "erase my event and project"?
Russ -
I can't open final cut pro.
I tried many times but always same message.
During reading audio filter "GSP-1101" then stop and error message shows.
GSP-1101 is digitech guitar multi effect for. I erase that app but still same.
It says
Process: Final Cut Pro [16201]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.6 (6.0.6)
Build Info: FCPApp-905291121~12
Code Type: X86 (Native)
Parent Process: launchd [105]
Date/Time: 2011-05-09 20:22:28.918 -0700
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 442109 sec
Crashes Since Last Report: 10
Per-App Interval Since Last Report: 120 sec
Per-App Crashes Since Last Report: 8
Anonymous UUID: CEED1A39-0766-40ED-AA1E-172DB715AD41
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000006b636970
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
objc_msgSend() selector name: retainFinal Cut Pro is part of Final Cut Studio. Try here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io -
I deleted a Final Cut Express project and emptied trash. Now can't open FCE. Message "one/more scratch disks does not have read/write access.
Use Disk Utility to repair permissions. Get Info for your drives and make sure the read/write permissiins are set correctly.
-
Can't open Final Cut Pro anymore. HELP!!!
I can't open my Final Cut Pro. When I click to open it, a message comes up saying, "Final Cut Pro quit unexpectedly." It tells me to click reopen to open the application, but every time I click reopen, the same message screen comes back. I can't open Final Cut. I need help.
I am having same exact problem.
It was working fine for years, and all of a sudden, after a Mac Os X Software Update it will NOT open, ( I think this may have caused the problem, however I am not sure)
Here is details of Report:
Process: Final Cut Pro [581]
Path: /Users/WhOaGRL17/Desktop/My Stuff/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 5.0 (5.0)
Build Info: FCPApp-504212200~2
Code Type: PPC (Translated)
Parent Process: launchd [137]
Date/Time: 2010-04-13 15:54:23.229 -0400
OS Version: Mac OS X 10.6.3 (10D573)
Report Version: 6
Interval Since Last Report: 76964 sec
Crashes Since Last Report: 5
Per-App Crashes Since Last Report: 5
Anonymous UUID: 581E4045-302A-46D0-8E01-0F5D3D1554C8
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x8023656a _pthreadkill + 10
1 libSystem.B.dylib 0x80235e17 pthread_kill + 95
2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
Thread 1:
0 libSystem.B.dylib 0x801402fa machmsgtrap + 10
1 libSystem.B.dylib 0x80140a67 mach_msg + 68
2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
3 libSystem.B.dylib 0x8016da19 pthreadstart + 345
4 libSystem.B.dylib 0x8016d89e thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802f74e0 ecx: 0xb7fff9ac edx: 0x8023656a
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000286 eip: 0x8023656a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x80236560
Binary Images:
0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <69E4FE93-376C-565E-650F-04FAD213AA24> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x8013f000 - 0x802e4feb libSystem.B.dylib 125.0.1 (compatibility 1.0.0) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
0x80364000 - 0x804ddffb com.apple.CoreFoundation 6.6.1 (550.19) <1E97FB1E-9E42-B8EB-E463-5C75315FDA31> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805d5000 - 0x805e3fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <82B2C254-6F8D-7BEA-4C18-038E90CAE19B> /usr/lib/libz.1.dylib
0x805e8000 - 0x805f4ff7 libkxld.dylib ??? (???) <13F26BB6-C2F7-9D74-933E-09AD8B509ECD> /usr/lib/system/libkxld.dylib
0x805f8000 - 0x8063eff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
0x8064b000 - 0x807cdfe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <96A45E03-2B29-83EB-0FC6-2C932E398722> /usr/lib/libicucore.A.dylib
0x8082f000 - 0x808dcfe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
0x808f0000 - 0x808f3fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld
0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0 (5.0) <C6CB6BA8-8BA2-8F0A-4A49-912B00D2FF10> /Users/WhOaGRL17/Desktop/My Stuff/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <06A5336A-A6F6-4E62-F55F-4909A64631C2> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[581]: garbage collection is ON
NO CRASH REPORT
ANY HELP AT ALL?? -
I can't open Final Cut Pro X. The problem seemed to start when I deleted some old backups. Help?
Close FCP X and re-open holding the Option key.
This will allow you to create a new Library, do so.
If the newly created Library works OK then there is a corruption issue in the current one that doesn't open.
Try a backup, usually found in your Home>Movies folder.
Al -
Can I open Final Cut Express HD project in FCP????
Can I open Final Cut Express HD project in Final Cut Pro?
This appears to be a duplicate post. Responses should go here
x -
Since connecting my new Cinema display to my new Mac Pro, I can't open Final Cut Express. I get the message that I need Quartz Extreme to use it. How come it isn't in my brand new computer or monitor?? I could use FCE fine with an old monitor. HELP!
I finally called Apple support on Monday (couldn't on Sunday - it surprised me that they don't have 24/7 phone support). Tech had no idea, so put me onto a 'supertech' (in America?). He instructed me to reset the whole computer - turn it off, unplug it and then hold down 4 keys while it rebooted. That worked. I can now open Final Cut Express and iMovie. There's no reference to 'Quartz Extreme' in my 'About This Mac' display info, but I don't care, everything works now, hooray! (Now if I can only get my Mac mouse to work properly...)
-
HT5103 How can I open Final Cut Express project in Final Cut Pro X?
How can I open Final Cut Express project in Final Cut Pro X?
If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.
-
I can't open Final Cut because of huge project
Hey everyone,
I'm working on a timelapse project in 10.0.9 on my MacPro5,1 with OSX 10.9 (13A603). I have the OS, final cut and the project and event files running on a 240 solid state SATA drive within the tower. AND lastly I have 16gb of RAM
So basically my problem is that this timelapse project is about 33gb large and when opening Final Cut it lags for anywhere between 2 and 5 hours to open. Once it is open I have to wait for the project to load which takes no time at all (1 minute or so). But when I start playback, pause and then try to play again I get the spinning beach ball of death.
I know my project is immense, but this can't be the biggest project of all time. Especially with the new RED cameras and RAW 4k footage. So what am I doing wrong? I don't want to throw out and start all over, but at the same time I know that that is a possibility that I'm going to have to cope with.
Also I've done the Repair Permissions, Repair disk and cleaned many extra unnecesary files within the computer already. So that's not an issue.
Can anyone help me? I'm supposed to have the project done by this Saturday, November 30th, 2013.
I appreciate any and all help.For a start try trashing the preferences with this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash and the job is done.
Perfectly safe as the preferences are separate from the app and when you re-open FCP X it will create new ones.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do. -
Can't open Final Cut Pro after the migration
I bought a new iMac (21.5 inch: 3.2 GHz) and migrated all the files from my old iMac, which I brought in 2006 or so. When I tried to open Final Cut Pro (Version 5.0.4), an error message shows up and says "Final Cut Pro quit unexpectedly" and I can't even open the application. Here are the details. Can anyone help me fix this problem? Thanks.
Process: Final Cut Pro [3035]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 5.0.4 (5.0.4)
Build Info: FCPApp-512141418~2
Code Type: PPC (Translated)
Parent Process: launchd [109]
Date/Time: 2011-01-02 22:48:29.318 -0500
OS Version: Mac OS X 10.6.5 (10H574)
Report Version: 6
Interval Since Last Report: 694 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 3
Anonymous UUID: 5B0387B3-BBF0-4EFA-BBC5-8967DF2FA1DC
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x80239522 _pthreadkill + 10
1 libSystem.B.dylib 0x80238dcf pthread_kill + 95
2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
Thread 1:
0 libSystem.B.dylib 0x801430fa machmsgtrap + 10
1 libSystem.B.dylib 0x80143867 mach_msg + 68
2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
3 libSystem.B.dylib 0x8017085d pthreadstart + 345
4 libSystem.B.dylib 0x801706e2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802fc540 ecx: 0xb7fff9ac edx: 0x80239522
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000286 eip: 0x80239522 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x80239518
Binary Images:
0x80000000 - 0x8005dff7 com.apple.framework.IOKit 2.0 (???) <A769737F-E0D6-FB06-29B4-915CF4F43420> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007d000 - 0x800e7fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x80142000 - 0x802e9ff7 libSystem.B.dylib 125.2.1 (compatibility 1.0.0) <62291026-D016-705D-DC1E-FC2B09D47DE5> /usr/lib/libSystem.B.dylib
0x8036a000 - 0x804e5fe7 com.apple.CoreFoundation 6.6.4 (550.42) <C78D5079-663E-9734-7AFA-6CE79A0539F1> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805dd000 - 0x805ebfe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <3CE8AA79-F077-F1B0-A039-9103A4A02E92> /usr/lib/libz.1.dylib
0x805f0000 - 0x805fcff7 libkxld.dylib ??? (???) <F0E915AD-6B32-0D5E-D24B-B188447FDD23> /usr/lib/system/libkxld.dylib
0x80600000 - 0x80646ff7 libauto.dylib ??? (???) <29422A70-87CF-10E2-CE59-FEE1234CFAAE> /usr/lib/libauto.dylib
0x80653000 - 0x807d5fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <35DB7644-0780-D2AB-F6A9-45F28D2D434A> /usr/lib/libicucore.A.dylib
0x80837000 - 0x808e4fe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
0x808f8000 - 0x808fbfe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <28F0312C-0678-159E-34E2-9A4E3DEADB20> /usr/lib/dyld
0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0.4 (5.0.4) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <62291026-D016-705D-DC1E-FC2B09D47DE5> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[3035]: garbage collection is ON
NO CRASH REPORT
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 4 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40Y6A0, 931.51 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: OneTouch II, 0x0d49, 0x7100, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000Two problems
Never migrate a pro app.
In your case the underlying issue is v5 is not compatible with intel processors
The solution is to purchase the upgrade to the current version, erase your hard drive and install the system and pro apps fresh from the disks
X -
Can anyone help me resolve a problem with opening Final Cut. I get the message "The application Final Cut Pro quit unexpectedly". I've tried using the FCP Rescue utility as well as tried to reinstall the software (though setup didn't give me an option to reinstall).
Is there a way I can uninstall the software without losing any files and reinstalling from scratch. Any suggestion would be helpful.
Thanks,
CommaletaMichaelG's question of what shows up on the splash is important... maybe it's trying to load an AE plugin that isn't compatible -- find that one and remove it from the plugin folder...
however -- not sure this helps YOU at THIS time but...
Here's what I like to do (short of a full reinstall) when FCP crashes:
When FCP Quits...
Do these in order and you might not have to do them all:
1) Trash Preferences FCPRescue - http://fcprescue.andersholck.com/
2) Repair Permissions - DiskUtility
3) Type this in your terminal window (without the quotes) and hit enter: "sudo update_prebinding -root / -force"
4) Unplug everything and wait
5) Create New User
Good luck,
CaptM -
After Leopard install, CAn't open Final Cut
I did an archive and install for Leopard. SInce then, I lost my Final CUt Express ANd Final Cut Pro registration info. They act as though I've never opened them before and are asking for my serial numbers. I'm assuming that the info is somewhere in my "previous systems" folder. What do I need? Where do I find it?
You should ask in the Final Cut discussion area. I didn't have any problem using Final Cut Express after the Leopard upgrade.
AFAIK you will need to dig out the boxes and user guides for those products to get the serial numbers. -
Either I can't find my printer control panel or it does not have the scan icon
I have an HP Deskjet 3055A J611 Series, which is running on Windows 7.
It is important that I scan several pages and place them all in one file. I understand that this requires that I access the printer control panel. I have accessed the printer through the icon "devices and printers", and the panel that comes up have only the following 4 items: am unable to scan from my printer control panel: HP Printer Assistant; See What's Printing; Set Preferences; Customize your Printer. Perhaps this is not the control panel? If not, then I do not know how to access the control panel. On the other hand, if this is the control panel, then it does not have all of the icons and I do not know why. Could you please help? If I can't get this straightened out, I will need to find another printer that can easily scan documents with several pages onto one file.
Thank you in advance,
Maria ROBLE
Language-incontext, FRANCEWelcome to the forums @CLEANA , Maria
I understand you are not seeing the options within the Printer Assistant to change the scan options to allow you to save a multi-page scan as one file.
I would first suggest installing the Full Feature Driver to install the scanning options.
Click here to download: HP Deskjet Full Feature Software and Drivers
Afterwards, you should see the printer software on your Desktop, open it up, click on Scan a Document or Photo, select the "Advance" option and you should see this box to check mark to select:
I hope that helps!
Happy Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Maybe you are looking for
-
Comparing two columns in a datagrid.
I have a datagrid that has a data provider of some users. The users have a name, address, balance, and payment amount. For the payment amount I'm using a custom MXDataItemRenderer as my TextEditor (not text renderer). What I want to do is validate th
-
Improving the quality of snapshots taken from a PDF and inserted into Indesign
I took a snap shot of a page on a PDF document. The PDF was created at "Press" quality. When I pasted into Indesign, the image is blurry. I went into Adobe reader to change the settings under preferences > general to get the highest possible pixe
-
Setting current row using a string key in an iterator
Hi , I am using Studio Edition Version 11.1.1.6.0 and integrated wls. QUESTION:_ As suggested by Sudipto i want to brief up my query. I have a master-detail relationship .Using that relation's Tree model i am displaying through an <af:iterator> . I w
-
Removing iFrames from the reports
Hi Gurus, We have drop down 1)Time Frame having values WTD,MTD,QTD,YTD 2)Measure having values Product,Service,Product & Service We are picking the value from the drop down and using iframes to call those different reports like Product WTD or Product
-
I can't link up the play button in Encore
I just want one button, THE PLAY Button. The project has no errors and will allow a build. Then When I add a button It will not link.