Can't open GarageBand file?

The problem I'm having originated on my iPad. I had created a song, called 'My Song 8', which had taken my quite a while to put togetether.
Everything was working absolutely fine, until the other day when I went to open Garageband (on my iPad), and after the 'Loading My Song 8' bar had filled, the app crashed. I re-opened it a few times, but still the same problem occurs.
To try and recover my song, I used iExplorer to transfer the file to my computer, and I then tried to open it on Garageband there - however, I have exactly the same problem. It loads all the instruments, and the loading bar fills, then the app crashes?
I'm a bit stuck, and wondering if anyone knows a way to recover my file?
If it helps I'm using an iPad 2 (16GB), and have Garageband 11 (6.0.5), on my MacBook Pro with Snow Leopard (10.6.8).
Thanks in advance.

What is the GarageBand version that your friend is using?
If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
                 GarageBand 6.0.5
GarageBand 6.0.5 will work well with your system.  But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio.  Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
-- Leonie

Similar Messages

  • Can I open garageband files in logic?

    I am going to be upgrading to Logic Express from garageband in a week or so, and I have some more questions:
    Okay, my first question is; Can I open garageband 08 files in logic, and if I do will they be mixed the same? And my second one is a bit more complex;
    On garageband there is an option to place software drums into little bricks and make them into beats. Can I record real drums and map the individual hits onto a grid with Logic?
    Thanks---

    JV145 wrote:
    I am going to be upgrading to Logic Express from garageband in a week or so, and I have some more questions:
    Okay, my first question is; Can I open garageband 08 files in logic, and if I do will they be mixed the same
    Yes.
    And my second one is a bit more complex;
    On garageband there is an option to place software drums into little bricks and make them into beats. Can I record real drums and map the individual hits onto a grid with Logic?
    Yes, though in a different way than in Garageband.

  • I can not open Garageband files

    When I open a Garangeband file I get a announcements like this: Audio file “Pista voz-gui#01.aif” not found. That's passing with every file that I have made and I can not hear my records. What can I do?

    There's a couple of possible reasons:
    • You have created your GB project by copying over audio regions from another project and deleted the original project. In this case, GB only refers to the original files, and if you delete them, they're gone (to avoid this, you have to save the new project "as Archive", that will include all the copied stuff and the loops).
    • Your project has been corrupted somehow. You can inspect the project by ctrl-clicking it in the Finder, selecting "show package content" and looking into the "Media" folder - but probably the recorded stuff will be gone.
    Does this happen with all projects you created in the past, or only some of them?

  • Logic Pro 9.0.0 can't open GarageBand 6.0.4 files

    As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.

    queequeg731 wrote:
    As the title reads "Logic Pro 9.0.0 can't open GarageBand 6.0.4 files" - any ideas? Logic just says files were created by a newer Logic pro version, they were created with GrarageBand not logic so I don't know.
    If you upgraded Logic to the latest version (9.1.4) you might be able to open them, in fact I think you can. Garageband is a subset of Logic, so the message you're seeing in Logic is correct.
    pancenter-

  • Why can't I open garageband files in Logic

    Loaded Logic pro 9 last evening and whew that took a while.
    I started trying to open Garageband files in logic and
    it made the attempt but didn't get very far. The progress
    window open but there is no progress. Just the beach ball
    and finally force quit of Logic.
    Logic works on it own, and Garageband works on it's own
    just fine.
    Another question, Do I need to install the Jam Packs I used with
    Garageband into Logic. I also have a few third party loops,
    should I install those as well or will Logic see all those loops
    when I finally get logic to open my Garageband files?
    Of course many thanks in advance.

    I have Garageband 5.1 and yes Ilife 09 as well.
    As an Update, I checked off all the items that were
    unchecked in my second installation using the install
    disc. Then I restarted the computer.
    This allowed some success with opening some of the
    garageband projects in logic. However 3 of the projects
    still refuse to open in logic.
    These 3 files seem to have one thing in common. When I try
    to open them in logic they get as far as the progress
    bar but then they all stop at a point where the words
    " channel eq" or "noise gate" is displayed and then I
    get the beach ball followed by force quit.
    I suspect the problem may be associated with plugins.

  • I can't open any file

    Hi every one,
    GarageBand does not open any file.
    From starting screen
    if a double clic on any of my previous song i get an error message
    impossible to open you file ..
    Even if i can create it a few minutes before ..
    as soon as i record it ..
    i am unable to open it any more ..
    i always get this error message
    "can't open your file"
    Has anyone an idea about what to do to fix this strong bugg ??
    Thank you so much for your help

    How many programs do you have open. Usually your machine will use the disk as scratch memory, but your program may be needing internal memory and it may not be able to address it. Close some programs backwards as to how you opened them and see if you can free some memory. If you still have a problem, I would close everything and restart opening that program first. Jerry

  • I can not open the file in Photoshop...

    I can not open the file in Photoshop after formattatto pc.
    I get the following error "could not complete your request because there is an error in the program
    Please me!
    Thank you

    Version CS3
    Adobe DNG Converter and Camera Raw 4.6 update
    6.2MB
    10/10/2008
    Camera Raw 4.6 update
    3.5MB
    10/10/2008
    Camera Raw 4.5 update
    3.5MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.5 update
    6.1MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.4.1 update
    5.4MB
    4/10/2008
    Camera Raw 4.4.1 update
    3.3MB
    4/10/2008
    Camera Raw 4.3.1 update
    3.3MB
    11/15/2007
    Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
    72.8MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.3.1 update
    6.1MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.2 update
    5.9MB
    9/13/2007
    Camera Raw 4.2 update
    3.2MB
    9/13/2007
    Camera Raw 4.1 update
    3.2MB
    5/30/2007
    Adobe DNG Converter and Camera Raw 4.1 update

  • I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

    I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

    Hi,
    Which Adobe Service did you purchased?
    If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
    Sign in with your Adobe ID and password, and then convert your word doc into PDF.
    Please let me know if that works.
    If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
    ~ Aditya

  • Can't open CR2 files in photoshop and camera raw

    This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
    I have:
    Photoshop CS4
    Camera Raw CS4
    Canon 5D Mark ii
    I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

    Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
    After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
    I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
    I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update )  this is the one for the Canon 5d Mk2
    After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
    This led me to the video.
    To the point.
    Download the update and save to a location where you will remember.
    open Adobe photoshop and go to "edit"
    Them " Preferences "
    then "General "
    Then " Plus-Ins"
    At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
    Shut down photo shop and try to open a raw.
    Bridge doesnt work for some reason but im going to keep looking.
    Hope this works for you as well.

  • Can't Open any files in photoshop CS3

    I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

    reset the preferences per the faq?
    http://www.adobeforums.com/webx/.ef4a07f/1

  • Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test

    Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test tomorrow.  I have deleted and reinstalled the application.  I have rebooted.  I have made sure my PDF's are associated with the program.  Every PDF on my computer won't open and I get the same error message.  It simply says Attempt to access invalid address.  How can I fix this?  Thanks.

    Hi Don,
    I have seen this issue fixed for some users by modifying the following registry key:
    The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
    Set the key to 1 instead of 0 then reboot the machine.
    In case you still face the issue try the following registry key change:
    The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
    BEFORE:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
    AFTER:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
    Note: Please take a backup of the registry before attempting this change.
    Regards,
    Rave

  • OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

    Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
    the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
    I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
    files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
    sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
    and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
    It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
    Please help, this would make note taking so much easier.

    A bit of a confusion on my part;
    Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
    Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
    Now, looking at this paragraph:
    BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
    I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
    CRRedist2008_ia64.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
    CRRedist2008_x64.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
    CRRedist2008_x86.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
    One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
    - Ludek

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

    I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
    I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
    I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
    The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
    In OS, when the image is selected no preview:
    Lightroom error:
    Bridge, no preview:
    Photoshop error:
    Ideas, suggestions?
    66 views on this discussion so far and no replies...
    Please help.
    Thanks in advance,
    Arthur

    Something appears to be wrong with your files.
    Are most of your images approx. 3.7 MB?
    This is very small for a 12 MP image.
    If you go back to the original file on your laptop, what is the file size?
    Also the fact that the Mac OS is not showing the preview is unusual.
    Perhaps these files got corrupted when they were moved to your new computer.
    Can you open these files OK on your old laptop?
    Is the OS showing the previews on your old laptop?
    Also compare the file sizes between old and new computer.
    Have you tried repairing your permissions?
    Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
    Good Luck!

  • I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

    I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
    Håkan

    Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
    After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
    Peter

Maybe you are looking for