Can't open https pages on web

I have an iMac running OS10.3.9 Safari does not open http pages at all. The following message: "Safari can't open page "http://www.(whatever website) because it couldn't establish a secue connection to the server "(whatever website). I have exhausted the Safari & MAC help without success. This started a few weeks ago. Needless to say I have been using a different browswer to access these websites but would like to use Safari again.
Thank you for any help

I hope guessing is allowed.
Your behind a proxy server -- disable it.
You running a third-party firewall -- disable it.
Hawaiian_Starman posts the following and it work for many people.
Quit Safari and add DNS server numbers to your System Preferences ->Network panel.
Select your type of connection and then select Advanced.
In the DNS servers panel enter 4.2.2.1 and 4.2.2.2 if you live in the US and click Apply.
Outside the US - use 208.67.222.220 and 208.67.220.222 and click Apply.
Launch Safari and from the Safari menu select Empty Cache - try the url's again.
Good luck,
Tom

Similar Messages

Can't open https pages

I have safari 1.3.2 and os 10.3.9. I cannot open any https pages on safari, but can on internet explorer. I have tried clearing the cache, but it didn't help. What else can I do?
iBook G4 Mac OS X (10.3.9)

hi~
well... i'll answer u by narrating my story to u...
april 2003 i bought this lovely Powerbook... it came with Jaguar...
quite soon after that there was Panther released...
i told myself... i don't feel the 'need' of going out there and buying that....'
so i stayed with Jaguar.... from 2003 til 2005.... i didn't have much trouble using Jaguar when lots of people were using Panther.... (and websites were already implementing new stuff that required me to upgrade the OS X)
then i said: well.. i now need the upgrade cuz the 'two-hundred-something new features' and the 'new things that Jaguar would never have' were leaving my PowerBook quite behind.... and i needed to view some websites and do some other things (that i don't remember now) that Jaguar would not let me do...
so i bought Tiger... (so now im planning to buy either: every other OS X, so that i can 'save some 130 bucks' , or when i would feel the desperate need of upgrading when some new feature becomes a 'must requirement' to run some things...)

Safari can't open the page https

Frustrating to say the least. About a week ago whilst in Google mail, Safari failed to open an email instead it opened a page displaying the message Safari can’t open the page “https"//mail.google.com" etc
A page refresh also failed to open the page as did a my attempt to "Sign out".
Later that day the same problem occurred when I was using my bank's website. Oddly, when I turned to Camino and it too failed to open Googlemail and the bank's site. On my MacBook both sites worked from both applications. Add if I use a different user account on my Mac Pro, I don't have the problem.
My account is a “Standard” user. A logout and back in and it works again, a reboot and it works again but after a couple of hours the problem returns:
Any help welcomed as the following steps have failed to resolve the issue:
Empty Safari cache
Reset Safari
Uninstall Safari 4.0 beta and re-install Safari 3
Re-install Safari 4.0 beta
Swaped ethernet connection on my Mac Pro
Verify Disk Permissions
Repair Disk Permissions
Delete website history with "Adobe, Website Storage Settings panel"
Reset router
Rebooted Smoothwall
ClamXav found nothing
DNSChanger Removal Tool found nothing
iServices Trojan Removal Tool found nothing
removed .GlobalPreferences.plist
Thx
John

Hi John
Google Mail has been problematic on Safari 4. There are a number of threads in the Safari 4 Beta forum addressing the issue.
Thanks for posting the steps you have taken so far.
In a broader sense, security certificates are at the root of secured sites functioning. Those certificates are part of the Keychain file in HD>System>Library>Keychains. Perhaps, the keychain file needs repair. Open Keychain Access in your Applications>Utilities folder. In the Keychains Menu, select "Keychain First Aid">repair. If any errors appear, rerun until you get a clean pass.
If no errors appear, you may have to reestablish the keychain entries in your Standard account. Do you have administrative privileges assigned to that account?
Also, I'm not familiar with Smoothwall's operation/setup, however, some tweaking of its settings may be necessary. Here's some dated technospeak about Smoothwall and Safari.

Safari 4 can't open some pages not beta

please if somebody have the solution the problem is:
i did software update and i downloaded safari 4 and install it .. but safari 4 cant open some pages such as...omm may be i can't post other web here.. when i try to go to some web site (not all) this msg come up
Safari can’t open the page.
Safari can’t open the page “http://(i don't know if i allow to put web site)com/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again.
but i can browse the same web site on firefox perfectly .. i tried to browse the same web site on another mbp using also safari 4 it work correctly !!
so i did repair permission and verify permission ... not work
i did reset safari.. it work once ( i can open page put when i click any link inside it the "safari can't open the page..." show again) and when i press back botton it also show safari can't open the page and i did safari reset again and also the same problem!!!
i did re- install safari and did repair permission and my mbp up to date but seems i can't browse this web site from my mbp with safari 4 ...
please if there is any way to install safari 3.1.2 again or solution for this problem just tell me
thanx for everyone

petriejb,
welcome to Discussions!
The LLBean site loads just fine for me. Besides, the "lost network connection" error and the inability to load Apple feedback page make me think the problem is not necessarily with Java or with one site.
Can you load other pages fine? Please post back.

Can't open DrmRequestProcessingTaskFlow page on WDK.

hi all,
Can't open DrmRequestProcessingTaskFlow page.
Please let me know if you know about it.
I had operation according to the following procedure
1. Configuration WDK on JDeveloper.
2. Compile WDK.
3. Deployed the DrmRequestProcessingTaskFlow of WDK on soa_server1
4. It was appeared HTTP 404 Error page when I accessed http://epm112001.jp.oracle.com:8001/workflow/DrmRequestProcessingTaskFlow.
The following table shows the environment information and the error log of soa_server1.
<Environment>
Workflow development Kit 11.1.2
SOA Suite 11.1.3
Web Logic Server 10.3.3
JDeveloper Studio 11.1.1.3.0
jdk1.6.0_23
<soa_server1.log>-----------------------------------------------------------------------------------------
####<2011/03/01 11時05分28秒 JST> <Info> <ServletContext-/workflow/DrmRequestProcessingTaskFlow> <EPM112001> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1298945128324> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred: java.io.FileNotFoundException: /index.jsp>
####<2011/03/01 11時05分28秒 JST> <Error> <HTTP> <EPM112001> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1298945128379> <BEA-101083> <Connection failure.
java.net.ProtocolException: Didn't meet stated Content-Length, wrote: '180' bytes instead of stated: '116' bytes.
     at weblogic.servlet.internal.ServletOutputStreamImpl.ensureContentLength(ServletOutputStreamImpl.java:422)
     at weblogic.servlet.internal.ServletResponseImpl.ensureContentLength(ServletResponseImpl.java:1431)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1505)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1455)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<2011/03/01 11時05分28秒 JST> <Error> <HTTP> <EPM112001> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1298945128479> <BEA-101104> <Servlet execution in servlet context "ServletContext@463389127[app:DrmRequestProcessingTaskFlow module:/workflow/DrmRequestProcessingTaskFlow path:/workflow/DrmRequestProcessingTaskFlow spec-version:2.5]"failed, java.net.ProtocolException: Didn't meet stated Content-Length, wrote: '180' bytes instead of stated: '116' bytes.
java.net.ProtocolException: Didn't meet stated Content-Length, wrote: '180' bytes instead of stated: '116' bytes.
     at weblogic.servlet.internal.ServletOutputStreamImpl.ensureContentLength(ServletOutputStreamImpl.java:422)
     at weblogic.servlet.internal.ServletResponseImpl.ensureContentLength(ServletResponseImpl.java:1431)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1505)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1455)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks in advance.
tom

Hey!
Did you manage to fix the problem?
Im also facing some problems installing the WDK kit.
-Leo

You are not connected to the internet - Safari can't open the page

After wake up Mac OS X 10.6.8 from sleep, Safari 5.1.7 on Ethernet does not connect to web servers:
"You are not connected to the internet" "Safari can't open the page"
The issue disappears after restarting the Mac. Is there a way to fix it besides restarting?

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

Firefox can not open this page

firefox can not open this page

'''[https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox]''' {web link} is a '''LAST RESORT ! !'''
What is the web address you are having problems with?
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Safari can not open the page

When I tried to redeem apps via FreeAppDaily (app) and FreeMyApps (web) today.
when it jumps from FreeAppDaily and FreeMyApps to the redeem page, It pops up "URL is invalid, so Safari can not open the page".
I had successfully redeem apps in FreeMyApps previously.
I tried to restart, change wifi network, clear cookie and reset network setting, but they are useless.

Yes, I can access other Web sites in Safari
I can download free apps through FreeAppDaily and FreeMyApps.
for FreeAppDaily, I get the redeem code from the app and then redeem the app from AppStore sucessfully.
but for FreeMyApps, I sent a email to the developer, the thier reply cannot solve my problem.
Hi there,
Thank you for your email. Due to the overwhelming response to our website,
we are not able to answer every query on the site.
In the meantime, check out our FAQs <http://m.freemyapps.com/learn_more>.
It has answers about what a profile install means, how to enroll as well as
remove the profile, when we add new sponsor apps, general guidelines for
social sharing and lots more!
Cheers!
The FreeMyApps Team.

"cannot decode raw data" - Safari (3.1) can't open the page..

Hi all,
I've been experiencing continuing issues with the Safari browser (3.1). I have emptied cache and reset safari, but to no avail!
Every time i try to load certain web pages, ie. eBay, You Tube, i receive the following message:
+Safari can’t open the page “http://k2b-bulk.ebay.co.uk/ws/eBayISAPI.dl?MyEbaySellingActiveListings&ssPageNam e=STRK:ME:LNL”. The error was: “cannot decode raw data” (NSURLErrorDomain:-1015) Please choose Report Bugs to Apple from the Safari menu, note the error number, and describe what you did before you saw this message.+
Has anyone else experienced similar problems? Webpages i try to load in Safari work fine in Firefox and Flock!
Many thanks

Yes, all of a sudden I have a very similar error trying to access www.macworld. ie Safari can’t open the page “http://www.macworld.com/”. The error was: “cannot decode raw data” (NSURLErrorDomain:-1015)
Just started happening out of the blue! And then on one other shopping web page.
Gavin

Safari can't open the page because the server where this page is located isn't responding

so i try going to gamefly.com and when i get to the website it won't let me browse the website or get into my account unless i'm useing my iphone with 3g i get the error message safari can't open the page because the server where this page is located isn't responding i tried it on every mac i have n its the samething i clear'd out my cache and cookes and even used different web broswers n still the same is there anyway to get this resolved i would be much aprecited thanks in advance.

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window:
curl -I http://www.gamefly.com
Press return. You should almost instantly get several lines of output below what you entered, the first of which begins with something like this:
HTTP/1.1
If there's no output within ten seconds, consider that a failure. You can then quit Terminal. Post your results.

Updated safari to 6.0.2 app starts but can't open any pages...help!

updated safari to 6.0.2... app starts but can't open any pages...help!

I tried turning off extensions as you suggested, Bee, but the problem persists. As you can see Chrome is working. Turning on auto proxy discovery in preferences made no difference.
The message I get when trying to open a web page is:
Safari can't open the page "http:www.apple.com/support/". The error is: "The operation couldn't be completed. Operation not permitted" (NSPOSIXErrorDomain:1)
Any chance you can decipher this and tell me what it means other than the web page can't open which I kind of figured out.

Add Device sees wireless but printer is wired and can reach the HTTP page on wire

I installed my new Officejet 8000 Pro A809 with an ethernet but when I run the HP "Add Device" Wizard, it trys to install it as wireless even though I select wired and the install fails.
I can see the http page for the printer and it shows all sane information about my printer so I believe the ethernet is actually working.
I am running WinXP with the FW off. The printer is on the same switch as my PC & of course I can see the http page
In the wizard, although I selected "Wired" of course the wire is working, the "Found Network Printers" page shows that its connection is wireless. None-the-less I click next and a screen comes up for "Starting Network Services" & it rolls though topology, wireless strength, etc. and to sending an SLP request to the IP then it fails & shows an picture of a wireless signal and a big red X.
The HP Home Network Diagnostics Utility says that software to connect to printer over network is missing BUT I ran the Wizard all the way though a second time, I selected that my device was not online and it finished OK. I ran the UPDATE from the Utility & it did a security update; I rand it again and it did not find any.
Although my FW is off, I checked the ports that the FW Guide says are needed:
I can telenet to the printer on ports 9100 & 92200
I cannot telnet on ports 137,139 or 427
Ideas?
Thanks!
Larry Holt
This question was solved.
View Solution.

OK, plugging the Ethernet cable into the printer should turn off the printer's wireless radio, but in case it did not, click the button near the blue light (or go to Setup > Network > Turn off wireless radio on the front panel).
Now, don't bother with the Add Device wizard, let's just add it manually:
Verify that you can browse to the printer's internal web page by its IP address. If you cannot, disable your security system's firewall (not Windows firewall, it is usually not in the way).
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Safari can't open the page on craigslist

can someone help solve my issue: i'm trying to post a sale on craigslist and when i continue to post, safari can't open the page on craigslist because server unexpectedly dropped the connection.
i've gone into preference and cleared the cache but for the thousandth time, i still get the try back later. its frustrating. and i'm new to mac.
help! help!

Safari can’t open the page “https://post.craigslist.org/sea/S/for/skc/x/PL7Yes3svlrxTGf6/qpeeb” because the server unexpectedly dropped the connection, which sometimes occurs when the server is busy. You might be able to open the page later.
thanks for responding. above is the message i get when posting. and its only with craigslist so far. i even added the /index at the end but it didn't work.

Can't open a page in safari

Hi, I just tried getting rid of install mac? genio on my Mac Pro. and now I can't open a page in safari. it says safari can't open the page "google/co.uk" because the server where this page is located isn't responding.
Can anyone help please?

http://osxdaily.com/2014/12/30/re-download-os-x-mavericks-installer-from-os-x-yo semite-app-store/
http://osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
http://liondiskmaker.com/
Mountain Lion is the second release of OS X to be delivered via the Mac App Store. Like with Lion, users can create their own bootable USB key installer to use as a recovery disk or to install Mountain Lion on multiple Macs without needing to download the 4GB installer multiple times.
Ars Technica has an excellent walk-through using either the Disk Utility application that is included on every Mac, or the newly updated Lion Diskmaker app that automates the process of creating a bootable install key.
The biggest catch to the whole process is to make a copy of the Mountain Lion installer before actually installing Mountain Lion, otherwise the installer will need to be redownloaded from the Mac App Store.
http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/
How to make a perfect bootable backup - and I suggest doing so early on, and then as needed so you have a known clean good system and a copy of your working system - using Carbon Copy Cloner:
http://bombich.com/

Since buying Pages 5.2 can't open any Pages 09 files

Since purchasing and updating to Pages 5.2 I can't open any Pages 09 files. Tried various things, nothing working.

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

Can't open https pages on web

Similar Messages

Maybe you are looking for