Can't open I tunes 10 because Quick time error -2096
Hello Dear Apple users,
it now about a day that I tried to install and unistall all itunes and Quick time and I delete the Temp directory in the AppData directory and restart, the same in the support area, but the error -2096 showed is the same.
I can use Quick Time, but I tunes doesn't work, I also try to install the version 9, the same error, I also tried to install Quick Time and Itunes separately, the same error.
I use Vista and I use only one profile like admin user.
Is there anyone that could help me please? I can't use my iphone, ipods...!!
Thanks
error -2096
A -2096 can indicate that something is checked in your iTunes compatibility mode tab. (It could also indicate something is checked in the QuickTime compatibility mode tab, but that seems less likely in this case given that your QuickTime Player is launching.)
Try the following document, but be sure that no checkboxes are selected in the compatibility tab (not just the Modalità di compatibilità checkbox):
[iTunes per Windows: come disattivare la modalità di compatibilità|http://support.apple.com/kb/TS1489?viewlocale=it_IT]
Similar Messages
-
I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?
Do you see the problem if you turn off Compatibility Mode for QuickTime?
Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
In the Properties window, click the Compatibility tab
Deselect all checkboxes currently selected in the Compatibility tab.
Click Apply.
Close the Properties window.
Check out this Apple document -> Error -2096 message when opening QuickTime for Windows in Compatibility Mode -
I upgraded t iphone 4. When I sync to computer. I was asked to upgrade itunes, I did. When I tried to open itunes a Quick Time Error 2069 occured. I went through several procudures. Finally I could open itunes. When I pluged in the phone, it would charge but not sync. What now?
update...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated. -
I can't open one Quick Time movie file. It says: Quick time player can't open (names file) because the movie's file format isn't recognized. Only happens on this one file. All the others of a two hour shoot are fine.
Any ideas what's happened and is there some way to open that file and retrieve what's on it?Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean -
I can't play i-tunes downloaded movies. I've tried opening them with Windows Media Player, i-tunes, and quick time. Nothing works.
If after you download the movie, you navigate away and do something else with your Apple TV the content you have downloaded will be overwritten and you'll need to download it again. It's a pain in the neck for many who have slow downloads but it's something that comes with using volatile memory rather than a hard drive for storage.
Perhaps you're not doing this, but I thought it worth mentioning. -
iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: WoildbillI just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps! -
I did a system restore to a previous state now can't open I-Tunes
To cut a long story short my windows XP PC is having problems so I have done a system restore to 1 month ago. The problem is that I can't open I-Tunes now. First it said that I need to uninstall & reintsall ITunes because it can't open quick time, so I went to my program files and opened quicktime manually which opens ok (although it may be an older version). When I then try and open i-tunes it says that it can't read my library because it has been updated since, and nothing happens. If I then re-set my PC back to today then everything is fine again. I believe that I-tunes last updated itself on 3rd June, but my PC problems happened before that so I need to restore my PC to an earlier state.
I have over 3500 songs in my I-tunes libary, about 200 purchases and about 20 playlists and I am worried about losing them all if I re-install as suggested. Can anyone help me please????
Or is there a way to transfer my i-tunes library over manually so that it opens it ok?+When I then try and open i-tunes it says that it can't read my library+
Use the directions from this article to find an itunes database that will work.
Surely one of the files in the *Previous iTunes Libraries* folder will work.
http://support.apple.com/kb/TS1967 -
Hello ))) I just bought a secondhand Macbook air 2009 edition. I spent one day to update it and now seems that everything is ok and update.
I also downloaded and installed the latest Itunes version. But when I try to open Itunes it doesn't and an alert message says: " I tunes requires Quick Time 7.5.5 version or later".
So downloaded Quicktime.exe and launch this file, but doesn't start any installing but I can see only a strange Dos window.
What can i do?
thanks
LapoNo one can help me?
-
OneNote recordings "We're sorry, we can't open the file because it is in use by another program."
Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013. -
"Safari can't open the page because it can't find the server"
I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?
Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help). -
I can't open my iTunes because it says MSVCR80.dll was not found. What can I do? Have I lost my entire library? Thank you for any help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99810) -
I attempted to open iPhoto and got this message: you can't open the application because it may be damaged or incomplete. Now the iPhoto icon has a little line through it.
Nice. Shall I say goodbye to my treasured iPhoto library? What happened?
I did just upgrade my iPhone to OS 5. Could that be related somehow?
Help!1. Back up your iPhoto Library - you should always have a back up anyway.
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
2. Reinstall
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
When I try to open iphono on my macbook pro it says "Can't open the applicaiton because it may be damaged or incompete". How do I repair this?
1. Back up your iPhoto Library - you should always have a back up anyway.
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
2. Reinstall
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
"You can't open the Trash because it's being emptied."
Trash is not working, with the message saying: "You can’t open the Trash because it’s being emptied." at the same time not able to shut down my computer... What may I do?
Thank you for reading this and I hope I can have some help soon.
noeltmngOne thing to try: Hold down option key, then press and hold Finder icon in dock. Select "Relaunch".
charlie
Maybe you are looking for
-
I want to change my apple id email?
When i try to change it on account manager, it says i 'can not change my email to my security email' my security email is the email i want to use as me main email, but i have no idea how to change it? i dont really want to make a new email as i use m
-
Hello Friends... I have 2 Issues ... Issue 1 ... I want to enabeld or disabled field here is 2 loops loop -- 1 Fetchning Record or Field Name from Database ... for compare if equal then enable true.. else false.. loop -- 2 this loop is depend on item
-
hi Guru's when i am trying to run expdp command i am getting following error [oracle@localhost ~]$ echo $PATH /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/home/oracle/oracle/product
-
Is there a way to password protect my Ipod classic?
Hi, I was just wondering if there is a way to password protect my Ipod Classic. I have some sensitive material on it that I don't want my little brother to have access to but i'm not sure how to hide these vids so nobody can find them....any suggesti
-
How to get data from another view on the RFx to populate bidders web dynpro
i am trying to populate bidders in the table on the bidder tab when a user click a button based on the line item data. How do i have access to get the line item since it is in a separate component controller and view for the RFx? thanks you.