Can't open installer from my Mac

I've downloaded the software for the HP PSC 1400 Series - Mac OS X v 10.2.8 and I'm told I "You can't open the application ... because PowerPC applications are no longer supported! I have a Mac with OS X 10.9.5. Please help!

Hi @Filipo ,
Welcome to the HP forum.
I understand that you are having difficulties installing your printers 10.2 software on your 10.9 Mac.
I would like to help you with this.
I tried to find 10.9 drivers at hp.com. this is what I found.
Installing a Mac Printer Driver Using Apple Software Update
Hope this helps you. Let me know if I can be of further assistance.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

I can't open iTunes from my Mac at all.

I get this error message: "The folder "iTunes" is on a locked disk or you do not have permission for this folder." I'm very "un-techie" so I don't know what to do next. I have not done anything different with the Mac, except it did an update earlier in the week. Should I just reinstall iTunes? Any help from the community would be so appreciated. Thank you in advance.

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.

It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.

I can see open tabs from my PC on my Mac, but I can't see open tabs from my Mac on my PC. Why?

I've set up Sync on my work PC and my home MacBook.
I can see open tabs from my PC while I'm on my Mac, but I can't see open tabs from my Mac while I'm on my PC. Why?

Here is what I am seeing on my Android device - at the top, a few options like History > Top Sites> Bookmarks>Reading List. Then, the search/address bar, then to the right of that, a square with the number "1" inside it, then 3 dots that, when chosen, give you the following options:
New Tab
New Private Tab
Request Desktop Site
Tools
Settings
Any thoughts on how I specifically sync my Desktop open tabs to my Android device so I can then see all my desktop open tabs on my phone?
Thanks!

How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far asi pictures but does not open?

How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far as i pictures but does not open?

This is not necessarily 100% correct at the current time.
As Dropbox is encouraging people to set it up for automatic uploading of photos they gradually increment your space as you load more pictures for free at the current time.
You do start with a fixed 2 GB but if you upload photos you will be awarded more free space.
You can also open a free account with Flickr - you may have some upload limits per day but you can upload pictures there.

Can't open files from iCloud Drive on Mac

Hi,
Can't open file from iCloud Drive on my MacBook Air (OS X 10.10.1).
I created new file (in Numbers for example). Then Numbers->File->Open->iCloud Drive->my_file.numbers and it says "Can't open file my_file.numbers".
I can preview the file by pressing Space, but openning from application and double-click on it doesn't work.
Files that were created earlear also not opened.
Does anybody know how to solve this problem? thanks.

Using smtp.mail.me.com - also tried smtp.me.com
SSL yes
port 587
SMTP Authentification Yes
Security SLS/TLS - also tried STARTTLS
User full **@me.com email address - also tried user name without @me.com
I have spoken to apple support this afternoon and we tried the variations shown above.
Support told me to wait for a day and try again!
After the iCloud authentication problem last night I changed all my passwords I wonder if there is an SMTP problem at me.com perhaps not reading the updated passwords?
I'll try and use the old passwords later.

I can't open Itunes on my mac. error 130001. how to fix?

I can't open Itunes on my mac. error 130001. how to fix?

Hi gingerjacker,
Welcome to the Support Communities!
Did you restart your Mac and try again? Sounds simple, but it's a good first step when troubleshooting.
If the issue persists you may need to delete iTunes from the Applications folder and download a fresh copy. This does not affect your iTunes library, which is in a different location.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Cheers,
- Judy

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Can I install CS6 from old Mac on new iMac using apple's migration-assitent

Can I install CS6 from old Mac on new iMac using apple's migration-assitent?

you may be lucky, but you should expect problems if you do that.
you should properly install your adobe software using the adobe installation files.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask.

HT201250 how can i pass information from one mac to another mac by using the time capsule

how can i pass information from one mac to another mac by using the time capsule

If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions

How can I get music from old mac to new mac?

How can I get music from old mac to new mac please?
Can't seem to make Migration Assistant work. Doesn't ask about or transfer files.

I just migrated into a new MBP from an old one.
It did not bring the music over. Apple's instructions are to use the Home Sharing feature of iTunes.
Open iTunes on your old Mac. Select Home Sharing under the Advanced menu. Sign in. Do the same on your new computer. Then when the library appears under Home Sharing on the left-hand panel on your new computer's iTunes, you can select all and Add To Library.
That's what Apple says, anyway.

Can't open iTunes 7.7 - Mac user

Hi Everyone!
I've recently upgraded my Mac from Tiger to Leopard and downloaded latest upgrade of iTunes. Was working fine two days ago and now I can't open iTunes from dock. Won't even open when I click on iTunes folder. What is going on???? Can ANYONE HELP PLEASE!!!
Thanks heaps - Vicky

This is the iTunes for Windows forum and so not the most likely place for you to get help with a Mac issue. Try the iTunes for Mac forum. You'll be more likely to get help there.
Good luck.

OSX 10.6.8 Firefox 30.0 can't open images from google image search results I can't left click on a google image search result to open the image.

OSX 10.6.8 Firefox 30.0 can't open images from google image search results
I can't left click on a google image search resultt to open the image. This works fine on Safari so is not a mouse issue. When I tried to ask this question in Firefox when I left clicked on the ASK THIS button nothing happened
Originally posted in OS section - Sorry

Do you otherwise have problems with the mouse in Firefox?
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can not open safari on my mac pro

i can not open safari on my mac pro. i have tried every thing i could from the support communities. also i have been trying to upgrade to mountain lion, but i could not get on app store saying the connection failed. i am getting tired of it. i think apple is suck as i used to use windows. please any one help out/

Hi there 70gull,
At this point, you may want to try reinstalling OS X as your next troublehsooting step. Take a look at the article below for more information.
OS X Mavericks: Reinstall OS X
-Griff W.

Can't open installer from my Mac

Similar Messages

Maybe you are looking for