Can't open mail or safari after update

I updated my software when the notice came up and after shutting down and restarting, I can't open mail or safari or itunes. The icons bounce as if starting and then nothing. Can anyone help me with this? I know very little about computers. I am writing this on a PC. (Yikes)

Hi cantfindwan, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Similar Messages

  • Can't open Mail or Safari after 7.0 update

    Safari and Mail apps crash immediately after opening following 7.0 update. Any suggestions?

    you would plug your device into your computer and back it up so you don't loose anything on it. And then in itunes there is a button to click to restore your device. This will erase your device and reinstall ios to factory settings and then from there you can load your backup to your device. This has helped me with any problems i have had with ios7
    http://support.apple.com/kb/HT1414

  • I can't open the "Keepsafe" App after update.

    I can't open the "Keepsafe" App after update it to the latest version,
    When i click on the app and after 20 second it's quickly goes back to the home screen,
    I've tried reopening this App and restarting my iphone but still not working.
    Please Help me to restore my data (more than 2,000 pics) in this App.
    Best Regards

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • I can't open my apps store after updating to ios 6.... so frustrating...

    i can't open my apps store after updating to ios 6.... so frustrating... i already tried setting the date and time but it didn't work.:( pls help...

    Use iTune to update your apps.
    Check for Updates (bottom right) in iTune. When download is completed, sync to iPad.
    http://i1224.photobucket.com/albums/ee374/Diavonex/8afe4ddede4f4fabb4e819174239d df4.jpg

  • Can;t open mail in safari

    can;t open mail in safari

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Cannot open Mail or Safari after having updated to 10.6.8

    I have a Macbook (late 2008 silver version). I formatted my drive and re-installed OS X Snow Leopard 10.6.3 from the installation disc (Mail version was 4.2). I then downloaded and installed the MAC OS X Update Combo 10.6.8 (Mail version became 4.6). Since then, my Mail and Safari app will not open and both give me this error message:  Mail cannot be opened because of a problem. Check with the developer to make sure Mail works with this version of Mac OS X. You may need to re-install the application. Be sure to install any available updates for the application and Mac OS X.
    I have downloaded all OS X updates (from the Software Update command)...but the problem still persists. Can anyone HELP?

    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode

  • [Solved] Thunderbird can't open link in Firefox after update

    Today there were updates for Thunderbird and Firefox (and a few other). After that Thunderbird can't open links with Firefox. If I click on a link nothing happen. I started Thunderbird from terminal, and when I clicked on a link I got this message:
    ** (thunderbird-bin:6130): WARNING **: Could not launch default application for URI: Failed to execute child process "/usr/lib/firefox-7.0/firefox" (No such file or directory)
    I checked /usr/lib and the folder for Firefox was directly under it, no folder "firefox-version" in between. I guess one must change the path somewhere for Thunderbird to find Firefox. Where to change that? I have looked both in the menus in Thunderbird, and in the Thunderbird folders in my home and in /usr/lib, but I  don't see the path to Firefox anywhere.
    Last edited by Lennie (2011-11-10 08:51:39)

    Lennie wrote:I checked /usr/lib and the folder for Firefox was directly under it, no folder "firefox-version" in between.
    That's right: http://mailman.archlinux.org/pipermail/ … 22051.html
    Unfortunately I have no idea what needs fixing. Have you tried to reboot?

  • Can't Open Mail Via Safari or Receive Emails - iCloud Down?

    I have 2 iCloud accounts, one for my family and one personal account.  My wife also has her own personal account.  2 of the 3 accounts are working fine but my personal account is having issues where I can send emails from mobile devices but not receive any emails.  In addition, when I go to www.icloud.com to login and click on the Mail app, it circulates for a minute or so and then gives me an error saying "Cannot open Mail".
    Is there some sort of outage that effects certain accounts? I've also already had some people report to me that emails they've sent me have bounced back to them.
    Any ideas/suggestions?
    Thanks

    Hi PJStyles,
    Welcome to the Apple Support Communities!
    I know it can be very frustrating when your email accounts are not working the way you would expect. Please reference the attached article for troubleshooting issues sending or receiving iCloud email.
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/TS4002
    Have a great day,
    Joe

  • Can't open ical or Safari after reinstall

    Hi. After unsuccessfully trying to install 10.4 (old Norton Utilities hung it up, trashed that, still didn't work, decided to wait,) I reinstalled software from original G4 Powerbook cd, then ran software update several times, till it offered no more updates. Also repaired permissions.
    Safari and ical will not open. (Other Apple programs work fine: Mail, Address Book, iphoto etc.)
    Thanks very much for any suggestions.

    Just noticed System Preferences also won't open.
    I should mention: when I reinstalled 10.3, I chose to save the unsuccessfully-installed system 10.4 as "previous system" (the other choice appeared to be to erase the drive & start over.) Now I see there's a Preferences folder in "Previous System>Library", but in the new System folder>Library there is no Preferences folder.

  • Wireless mouse can't open mail with Safari

    After signing in Yahoo accout with Safari, my wireless mouse can't click on any item... just jams - nothing

    Ok! Thanks for sharing!

  • Can't open raw files acr2 after update to cs5

    Im running a 64 bit windows 7..before the update to cs5,  running a cs4 and lr 2.6 with plugin ver 5.6, when i updated to cs5 and 2.7 for the LR, i cant open a cr2 files only jpeg and photoshop files and also  im getting error on LR error (LR has stop working) . i tried the to convert to 5.7 dng but still have no luck. I tried everything buy removing the .lr8 files, purge and still no luck...I have a 5D and Mark 2n camera, and Nvidia GTX 275 with dual monitor..

    redhunt wrote:
    ACR work in CS4 before the update and now cant even access the ACR in CS4 when i update to CS5, i checked the camera raw plugin both CS4 and CS5 and 1 each plugin installed ( cs4 ver 5.6 for CS4 and ver 6 for CS5)...
    Something is screwed up the the ACR folder.  Since CS4 and CS5 should act as seperate programs, with differenct ACR versions,  one should not affect the other.
    With 32 bit and 64 bit versions you have 2 programs and therefore 2 locations for the ACR files.  In CS3 the location should be program files/COMMON FILES/Adobe/Plug ins/CS3/ file formats/camera raw.8bi
    Should be something similar for CS4 and CS5.  Believe 32 bit version is in X86 directiory.

  • I can´t open files with number after update, last week.

    Last week I upgraded Mavericks, Pages, Keynote and Numbers .. that's OK, then I could not open these programs. When I try, a window appears: "To open this spreadsheet must use a later version of Numbers.  You can download the latest version of Numbers from the Mac App Store.". 
    Access the App's Store and says application already installed. What I can do?

    Juan,
    When you upgraded to MAvericks and installed the latest iWork programs.  the installed moved the previous version of the iWork programs to the folder "/Applications/iWork '09"
    You are trying to open a numbers file in the new format with the previous version of Numbers.   The main thing to to be aware of what version you are running:
    Numbers:
                   2.3                                   3.0
    The previous version (2.3) is on the left and the new version (3.0) is on the right.
    The old version cannot open numbers files that are from version 3.0

  • I can't open mail/ message "can't use this version of mail with Mac OS X  this occurred after security update

    I can't open mail/ message "can't use this version of Mail wigh this version of Mac OS X" this change occurred after a security update. tried to open in application with same responce.

    Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

  • Can't open mail after installing update with 10.6.8 says my mail is out of date

    Please help - new to Macs and I installed automatic update of 10.6.8 - 4 days ago and now I can't open up mail  - it says "You can't use this version of Mail with this version of Mac OS X. You tried to open Mail version 4.5 (1084/1085) in Applications/ Mail.
    So I went to  Applications, says this message again. So I   used my discs that  came with the computer adn installed again  Applications - no luck.
    I had luckily  backed up 2 days before this update - so went to Time Machine - did restore - now good still - can't  open mail. CLick on Iconand get same messgae .
    Please help. Thank you

    rainbowmum wrote:
    Thank you for the very clear basic instructions—helpful for a newbie.…Also my first screen shot !! I see that it does not have .App next to it
    Most likely because you have Finder's preferences->Advanced->Show all filename extensions unchecked. Check it, log out, and back in and all the apps should display the .app extension.
    Now, back to your problem. If you installed the Security Update 2012-004, it failed to update Mail to 4.6; thus, your problem. Manually DL it from http://support.apple.com/kb/DL1586 and reinstall it.

  • On 10.4.11 Mac Mail I get this: Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unnedded documents or move documents to another volume. I can't open mail.

    On 10.4.11 iMac Mac Mail I get this message: "Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume." I can't open mail to do this. I have reinstalled software but no effect. How do I get into Mail to delete?

    Found this on the "more like this" Worked like a charm!
    With the Mail.app quit and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
    Go to Home > Library > Mail > Envelope Index. Move the Envelope Index file to the Desktop.
    Launch Mail and you will be prompted to import mailboxes. Select OK and allow the import process to complete.
    After confirming all mailboxes were successfully imported and available, you can delete the copy of the Mail folder and old Envelope Index file from the Desktop and this should resolve the problem.

Maybe you are looking for

  • 1 week with my X100e

    I was compelled to write my own review after reading some bad ones out there (mostly about the MV-40)... My Specs: AMD Turion Neo X2 Dual Core (L625) 4GB RAM 160GB intel X25-M SSD Bluetooth Windows 7 Pro x64 -plus all other standard equipment. The PR

  • Send an email to a mail box when generate a xml publisher report in R12

    Dears, I faced a tough problem about xml publisher, there is a user's requirement, they want to send an email to a common mail box after user run the xml publisher report in EBS R12 instance, and they can check the report in mail box, I have not met

  • How to create database roles  ?

    Hi , i am trying to create database roles, what is the best way to do that ? I want to be able to create the following database roles on my local machine: CSDExec CSDAdmin      TCFBurOps      TCFAreaLieutenants      TCFCourtSupervisors More to this p

  • BAM Cluster setup - issue with whole server migration configuration

    HI, We are working on a SOA , BAM , BPM Cluster setup on OEL VMs With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2. We were successfully able to setup clustering for Soa without using the webTier util

  • "Recent contacts" list showing old contacts

    I see a lot of questions about removing contacts from the new "recent contacts" list, and a lot of solutions saying to hide the list altogether. however, there is only one contact I want to remove from the list because they are not recent. I found on