Can't open my email -microsoft outlook
I bought this computer from a friend last week and had my email set up, but I did something wrong and now when I try to open microsoft outlook a small screen comes up that shows a X cannot open microsoft outlook
>> I do not think Microsoft uses Microsoft Outlook any more
Sorry, they still sell Outlook. Probably you are talking about Outlook Express
For the OP, do you have lisence for it ? Which version of Outlook are you using (2003, 2007 or 2010) ? What is you setup (You can remove this and let Outlook try setup for you again).
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Firefox v22 can't open any emails in Outlook, Internet Explorer works, problem started july 19, 2013
Firefox v22 since July 19 cannot open emails or look in folders in MS outlook. Internet Explorer works ok. I reinstalled v22 of firefox but no change
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
If I send someone an htm file that has been created by Firefox can they open it in Microsoft Outlook
I created an htm file with a program and sent it to someone but it says it is Firefox htm file. The other person does not have Firefox and says they cannot open it.
Is this correct ?Every browser or other program (e.g. an HTML editor or a program like MS Word) that can render HTML files should be able to open an HTML file and display its content properly.
Your Windows OS only shows the file as a Firefox file because you have chosen Firefox as the default browser, so the .html file extension is associated with the Firefox program. -
Can not open some PDFs in Outlook
I can not open PDFs in 2010 Outlook from just one particular email. Other PDFs from other emails open fine.
have uninstalled and re-installed latest Adobe Reader.
How do I fix?Hi,
Do you mean you can't open PDFs send from a particular email address or just the PDFs in one particular email?
Can you view the PDF from web access?
In addition, please try Anil's suggestion, download the pdf to local and try to open it locally.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support -
Mail: I can only open one email at a time
Using Mail, I have a very strange phanomenon: I can only open one email at a time. E.g. when writing a new email, I cannot open another email for reference. I need to close and save the new email as a draft before being able to open another one.
It would be great if somebody could help me with this, thanks!Hi Cocolores,
If you choose File > New Viewer Window from the menu bar in Mail, you can have as many email messages open as you like.
I hope this information helps ....
Have a great day!
- Judy -
Can't open my emails, can you help?
Can't open my emails, please help me
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How can i open and edit microsoft documents in macbook pro
how can i open and edit microsoft documents in macbook pro with retina display? I am a new user to mac book
You could install Office for Mac. You could install a free Office-like program such as LibreOffice. You could open the documents with a program like Pages. Or you could install Windows and Office on your Macbook Pro.
-
Hi, I have installed Oracle Linux 6.5 64 bits and I want to connect with MSSQL Server using ODBC.
I have installed unixODBC and then Driver Manager and I didnt have any problem.
I created a DNS in odbc.ini file, and I have setup my odbcinst.ini
SUCCESFULL MESSAGE AFTER INSTALL DRIVER MANAGER
[root@MV-OBI-LINUX sqlncli-11.0.1790.0]# odbcinst -q -d -n "SQL Server Native Client 11.0"
[SQL Server Native Client 11.0]
Description=Microsoft SQL Server ODBC Driver V1.0 for Linux
Driver=/opt/microsoft/sqlncli/lib64/libsqlncli-11.0.so.1790.0
UsageCount=4
Threading=1
FIRST ERROR
[root@MV-OBI-LINUX sqlncli-11.0.1790.0]# isql -v msPreflex userbd grup0r0c10
[01000][unixODBC][Driver Manager]Can't open lib '/opt/microsoft/sqlncli/lib64/libsqlncli-11.0.so.1790.0' : file not found
[ISQL]ERROR: Could not SQLConnect
SECOND ERROR
[root@MV-OBI-LINUX sqlncli-11.0.1790.0]# sqlcmd -$172.16.1.141 -userbd -grup0r0c10
sqlcmd: error while loading shared libraries: libcrypto.so.6: cannot open shared object file: No such file or directory
ODBC.INI
[msPreflex]
Driver=SQL Server Native Client 11.0
Description=Prueba Preflex
Trace=Yes
Server=172.16.1.141
Port=1433
Database=Preflex
ODBCINST.INI
[SQL Server Native Client 11.0]
Description=Microsoft SQL Server ODBC Driver V1.0 for Linux
Driver=/opt/microsoft/sqlncli/lib64/libsqlncli-11.0.so.1790.0
UsageCount=4
Threading=1
ENVIROMENT VARIABLES
[root@MV-OBI-LINUX sqlncli-11.0.1790.0]# env
ORBIT_SOCKETDIR=/tmp/orbit-root
HOSTNAME=MV-OBI-LINUX
GIO_LAUNCHED_DESKTOP_FILE_PID=3168
IMSETTINGS_INTEGRATE_DESKTOP=yes
TERM=xterm
SHELL=/bin/bash
HISTSIZE=1000
XDG_SESSION_COOKIE=d020d502ea288dbe070bc5c00000002d-1423846295.554191-1437283619
CPPFLAGS=-DSIZEOF_LONG_INT=8
GTK_RC_FILES=/etc/gtk/gtkrc:/root/.gtkrc-1.2-gnome2
WINDOWID=39845891
OLDPWD=/root/Documentos/ODBCdriver
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
IMSETTINGS_MODULE=none
USER=root
LD_LIBRARY_PATH=/usr/lib:/usr/lib64:/lib64
GNOME_KEYRING_SOCKET=/tmp/keyring-A7hSJq/socket
SSH_AUTH_SOCK=/tmp/keyring-A7hSJq/socket.ssh
ODBC=/etc/odbc.ini
USERNAME=root
SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/2515,unix/unix:/tmp/.ICE-unix/2515
GIO_LAUNCHED_DESKTOP_FILE=/usr/share/applications/gnome-terminal.desktop
PATH=/usr/bin:/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/root/bin
MAIL=/var/spool/mail/root
DESKTOP_SESSION=gnome
QT_IM_MODULE=xim
PWD=/root/Documentos/ODBCdriver/sqlncli-11.0.1790.0
XMODIFIERS=@im=none
GDM_KEYBOARD_LAYOUT=es
GNOME_KEYRING_PID=2505
LANG=es_ES.UTF-8
GDM_LANG=es_ES.UTF-8
GDMSESSION=gnome
ODBCSYSINI=/etc
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
HOME=/root
SHLVL=2
CFLAGS=-DBUILD_LEGACY_64_BIT_MODE=1
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
LOGNAME=root
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-VogE1CY9Xk,guid=4815e509079ed1f0ced76e150000002f
LESSOPEN=|/usr/bin/lesspipe.sh %s
WINDOWPATH=1
DISPLAY=:0.0
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/var/run/gdm/auth-for-root-N946Cy/database
_=/usr/bin/envI had the same confusing (because file is clearly here) error with isql:
mymachine:/ # isql -v ServerDSN User Password
[01000][unixODBC][Driver Manager]Can't open lib '/opt/microsoft/msodbcsql/lib64/libmsodbcsql-11.0.so.2260.0' : file not found
[ISQL]ERROR: Could not SQLConnect
Using bcp gave me a hint as to what the real problem is:
mymachine:/ # bcp master.INFORMATION_SCHEMA.TABLES out OutFile.dat -S ServerName-U User -P Password
bcp: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory
Oopsie my bad: the package is clearly listed in the
system requirements page.
Running "zypper install libopenssl0_9_8" fixed my issue. -
Anyone have any ideas why I can't open/read emails?
It says, Load more messages. I've turned the phone off and on.
ThanksWhen it says Load More messages, do you tap there to have it do so?
-
I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?
QUESTION: Were you induced to upgrade to Mavericks after seeing this dialog box?
-
I had just upgraded my macbook to Mountain Lion and was wondering why PowerPC applications were no longer supported. I kind of really need to use Word for school, but when I tried to open it, I got the message "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported."
SummerLutmer wrote:
I had just upgraded my macbook to Mountain Lion and was wondering why PowerPC applications were no longer supported...
Here is a recent post I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps. A recent poster has offered a solution for Mountain Lion users that do not have access to Snow Leopard or Lion Macs.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I have updated operating system to OS X Mountain Lion and can't open Microsoft Entourage: You can't open the application "Microsoft Entourage" because PowerPC applications are no longer supported
You need to upgrade to the current version of Office, or use something else.
-
As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.
The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2) -
Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.
Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry -
I just download mountain lion to my mac, now microsoft office suite doesn't work....it says 'you can't open the application 'microsoft word' because PowerPC applications are no longer supported. What does this mean and what do I have to do to fix it?? HELP!!
Install Snow Leopard on another boot partition, or upgrade Microsoft Office to a newer version, or use any number of better alternatives. Some of them are free.
Consider
LibreOffice (donation-supported)
NeoOffice ($10)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft.
Maybe you are looking for
-
Dynamic position of an image at the right bottom of the browser window
Dear Dreamweaver-community, I'm trying to have an image positioned at the bottom right of a html-page. It is embedded in a table so that it doesn't interfere with the rest of the site's content (which it would if I simply used an absolute position).
-
Dataguard Config - Primary ASM - Standby Non ASM
Hi, I'm having an issue with a new configuration of dataguard. Primary Standby OS Win2008 R2 Win2008 R2 DB 11.2.0.2 11.2.0.2 Storage ASM NTFS I have created standby logs on the standby and on the primary. I have configured real time apply(maximum ava
-
Maintaining Opening Balance in BW....
My client doesnt want to load the whole data from R3 to BW. So we are loading only the data starting from present fiscal year ie from 1st April 2007. But how do I take care of the opening balance on 1st April 2007 coz by default its coming 0. I have
-
PX Deq Credit: send blkd At AWR "Top 5 Timed Events"
PX Deq Credit: send blkd At Top 5 Timed Events Hi , Below are examples of "Top 5 Timed Events" in my Staging data warehouse database. ALWAYS , at the most Top 5 Timed Events is the event : PX Deq Credit: send blkd. Oracle saids that its an idel event
-
What a css setting for eliminating the extra line space that occurs after a </p> If this were in Word, this space would be equivalant to a double space after an enter. Thanks!