Can't open my note book. It says Selected boot image did not authenticate.

I dropped my note book on the floor, later when I turned it on it appears to give the message 'selected boot image did not authenticate. Press enter to continue' When I pressed enter the device shut downs. Please help with this problem.

your problem is due to Secure Boot it is a technology where the system firmware checks that the system boot loader is signed with a cryptographic key authorized by a database contained in the firmware in your case boot loader is damaged.
temporary solution:
go to bios and disable secure boot.
may this help
to use secure boot feature again you have to repair your boot loader.
click on thumbs up if i help and mark as answer if i solve your problem

Similar Messages

Screen says "select boot image did not authenticate."

When i went to turn on my windows 8 pavillion laptop, it went right to a screen where it had a message box saying "select boot image did not authenticate." it said press ok, or enter to continue, so we did. all that did was shut off the computer. this happens every time we try. how can we fix it ?

Hi qpgmr,
Thank you for providing the information on what happened when switching to legacy boot. Have you been able to Run the start up tests from anthony82's post? What was the outcome of these tests?
I have included the document 'Computer Does not Start (Windows 8)'. Please follow for Computer opens to a blue "Choose an option" Screen, if these options are available to you. If these options are available, please select troubleshoot > Advance > Repair Start up.
If the above options are not available to you, see if you can enter safe mode/ advanced options mode. I have included the following document 'How To Access Advanced Startup Options in Windows 8 or 8.1'. This lists the different possible ways to enter safe mode/ advanced options.
Thank you.

Selected Boot Image did not authenticate

I turned my computer on and it says selected boot image did not authenticate.
I tried changing the bios i tried the hard power off. I have tried about all the things suggested in forums and nothing it working. I have tried EVERY SINGLE THING.
There is no disc drive on the computer so i can't do a reboot without a key or usb but everytime i try to download. it doesn't finish. what do i do?

Try this...
Windows 8 Product Activation
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

[SOLVED][unprofessional] Selected boot image didi not Authentificate

Hi I try to install Arch on HP-Envy 15
a 64 bi machine
with uefi
and ran in many bootloaderproblems "Selected boot image didi not Authentificate"
this is what i did:
gdisk /dev/sda
gdisk /dev/sda
p
something like
sda1 300 G linux filesystem
sda2 10G swap
sda128 470 Mib EF00
w
mkfs.ext4 /dev/sda1
mkswap /dev/sda2
mkfs.fat -F32 /dev/sda128
partitions were mounted like the beginners guide tells
pacstrap -i /mnt base base-devel
genfstab -U -p /mnt >> /mnt/etc/fstab
arch-chroot /mnt /bin/bash
I did some of the local settings
made hostname...
Ok but the problem will come here i think
pacman -S dosfstools efibootmgr grub
grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=arch_grub --recheck
mkdir /boot/EFI/boot
cp /boot/EFI/arch_grub/grubx64.efi /boot/EFI/boot/bootx64.efi
grub-mkconfig -o /boot/grub/grub.cfg
after exit reboot i run into the error i told.
the comuper might recognize anything because if nothin is on the harddrive it says something diffrent.
Can anyone help me to install?
is anything better than grub?
did i do something wrong?
ps. installing from archiso ran into errors too
Last edited by kwatrecht (2014-11-18 12:06:15)

Ok short update i tried the lasy Bootloaderfix trick i installed Kubuntu on /dev/sda3 told the bootPartition is /dev/sda128 and let them manage it
now arch runns

Selected boot image did not authenticate. Press enter to continue

I just removed the stock HDD that came with my M4-1015x and now I'm trying to install windows 7 to the SSD that I replaced it with. However, upon boot up I get the message "Selected boot image did not authenticate. Press <enter> to continue" when the laptop attempts to read the OS from the disc. I've never seen this before... any help? (It's a legitimate DVD copy of Windows 7)
Thanks.
This question was solved.
View Solution.

I fixed it. Had to disable secureboot and enable legacy boot mode to get it to run.

Message d'erreur "selected boot image did not authenticate. Press enter to continue.

Jai le Message d'erreur "selected boot image did not authenticate. Press <enter> to continue."
Jai vus dautre sujet comme cellui-ci mais moi il m'est impossible douvrir f10 poir desactiber le secure boot
Merci de vos reponse

Hi los,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
Regards,
George

Selected boot image did not authenticate

I tried to get on my computer but to no avail, The message comes up and when I press enter the computer goes off. I tried taking out cable and battery and held down power button for 15 seconds but nothing happens. Please advise if there is anything else I can do? thanks

Hi
Once unit is powered on keep tapping the F2 key and run the Test and let me know the result.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I can't open some photoshop files it says "The command "Set" is not currently available."

What does this mean and how can I fix it? A corworker will make a photoshop file (Poster for example) and when i try to open it on my computer it wont open and says "The command “Set” is not currently available." What does this mean and how can I fix it? Thanks!

You are running some sort of automation when you open files - because that error message comes from automation (actions, scripts or plugins) that are trying to target something that isn't there.
Event Scripts was the obvious choice.
Automation plugins, or Flash Panels are the next most obvious -- try disabling all third party plugins and Flash Panels.
The error might come from Generator, if you have the latest Photoshop CC.

TS3212 I can't open my iTunes because it says MSVCR80.dll was not found. What can I do? Have I lost my entire library?

I can't open my iTunes because it says MSVCR80.dll was not found. What can I do? Have I lost my entire library? Thank you for any help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99810)

How can I get Quicktime to open my WMA file- it says a required codec is not available

How can I get Quicktime to open my WMA file- it says" a required codec is not available"?

please jon, where I can find those "Flip4Mac" codec packages?
Gp to http://www.telestream.net/flip4mac/ to see a comparison list of codec components available and what each set can do.

I can't open my digital book. Mis180 They said that the vendor account is not associated with the it

I can't open my digital book. Mis180 They said that the vendor account is not associated with the item I am trying to open.

This is the Reader forum. The Digital Editions one is here:
http://forums.adobe.com/community/adobe_digital_editions

When i down load a program on firefox i can never open it ...it says it not a valid win32 application

when i down load a program on firefox i can never open it ...it says it not a valid win32 application
i down loaded firefox 3.611 threw firefox and thats the erro it gave me and on anyother application i down load it alway tell me this when i go to run it... it not a valid win32 application

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

Can't open the application "Adobe Illustrator CS6.app" because it is not supported...

UPDATE - Ahhh haaaa! If I log in with the guest account Illustrator works fine! WTF!? Oh well, at least I have a direction to be working towards, thanks for all the suggestions and assistance Adobe Community!
That was sarcasm by the way...
UPDATE - Just installed the latest Illustrator update from Adobe - still not loading. Tried reseting the iMac's PRAM, no luck.
UPDATE - I've just reinstalled the whole CS6 Suite, and the only things that have changed are that I now have a little white no entry sign over Illustrator (it still won't load) and I also have 1.5GB of application updates to do
I don't have any direct evidence but I'm guessing this is a Mavericks incompatibility judging by the other issues people are having with Illustrator. Any suggestions are welcome!
I've been using CS6 on my iMac for the past year (3.2GHz Intel Core i5, 32GB ram). Everything running fine, no problems.
Then I get the popup from Apple saying to upgrade to Mavericks, so I did. After updating my Java version, for the next two weeks everything carried on running fine. Until just now.
I finished working on an Illustrator file, saved it and then exited, only to remember I needed to make one more small change. So I clicked on the AI icon and got this error message;
'You can’t open the application “Adobe Illustrator CS6.app” because it is not supported on this type of Mac.' Eh???
I tried doing a reboot thinking that maybe something had just gone wonkey and needed resetting. Still no luck. So I reinstalled Java again. Nope. Then I tried every other CS6 app and they all ran fine.
Does anyone know what could cause Illustrator CS6 to be working fine for weeks and then suddenly become an unsupported app? These things always happen with you're right up against a deadline! I NEED ILLUSTRATOR WORKING NOW! HEEEEEELLLLLLLPPPP!
James

I had the same issue and resolved it
I first remove the prefs folder and the plist files for illustrator in ~/Libary
next I logged off,
then I uninstalled illustrator using the adobe uninstaller(http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html)
Next I reinstall illstrator
after that it worked for me.

Why does 'You can't open the application "setup.exe" because Microsoft Windows applications are not supported on OS X.' pop up whenever i try to download the latest flash player?

whever i try to access websites, most of them work but facebook, youtube, my school email, sometimes even google, and alot other websites wont work for me and will tell me i need to update the lastest Flash Player. but when i try to download it, it says 'You can’t open the application “setup.exe” because Microsoft Windows applications are not supported on OS X.' what does that even mean?? This happens on safari, google chrome and i downloaded firefox and it worked for a couple of hours and then stopped working again.
please help, thanks in advance.

1. Install Adobe Flash Player from Adobe site.
    http://get.adobe.com/flashplayer/
   Download it first. Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Hi. I can't open an e-book I've bought. The error message is E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER

Hi. I can't open an e-book I've bought.
first I've managed to open it but without log-in ( Ihad forgotten my password), but, as i didn't manage to download the e-book on my e-reader, i've log-in, and tried to re-open it and the, it didn't open.The error message is E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER.
Thank you if you had the same problem you managed to solve
Fleur M

Hi Shreya,
That answer seems to work in purchased books but in my case I dont know who is the ebook provider in lebrary. I asked library people and they did not give me any contact to reset the activation. I will try again to find out that contact. I was wondering if there is any way at our side so we can fix this. Probably there is nothing. Thanks anyway.

Can't open my note book. It says Selected boot image did not authenticate.

Similar Messages

Maybe you are looking for