Can't open Nikon D300 raw files in camera raw in CS3

Is there a solution to this?

The D300 is supported in CS3.  The last version of Camera Raw that is compatible with CS3 is 4.6.  If you have it installed correctly you should have no problems.  Your camera was supported in at least one previous version, I didn't check real closely.  But you should install and use 4.6.

Similar Messages

  • Can't open more than 150 files in camera raw?

    I have been trying to open multiple files from the bridge into the raw program for cs3...but if I try for more than 150 or so at once, it tells me the request can not be completed because too many files were selected for opening? I was able to open hundreds at a time with cs2's version of raw and bridge, so why can't I do this now? Any suggestions would be greatly appreciated! Thanks!

    Open Bridge CS3, select an image (or group of images), right-click (or control-click) and select "Open in Camera Raw..." from the popup menu.

  • Still can't read Nikon D60 NEF Files with Camera RAW 4.4 updatel

    I've installed the Camera RAW 4.4 update with Elements 5.0.2, but I'm still unable to import files from the camera. Elements advises that files are damaged ...

    My problem was that while I had renamed the old file by changing the suffix to ".old", this was not enough. I subsequently created a new sub-folder "old" and moved the old file to this new location. I had already copied the new file to the correct location. Once the old file was gone from the active folder, all was OK.

  • Installed PSE 8 and am now unable to access RAW files through Camera Raw.

    Help! I have installed PSE 8 and
    now cannot access Raw files through Camera Raw click
    on Editor and the photographs open in Editor.
    I have tried installing the upda
    te 8bi in the plug-in and there was already a plug-in there.
    PSE6 worked fine on this system. Any help appreciated.

    Firstly thanks to the people who
    offered help. This is what I did and somehow the problem is solved. I installed PSE 8 on my old machine with XP and an old Xerox monitor and it worked OK. I uninstalled PSE 8 from the newer machine on Vista. Made sure all the adobe files for pug-ins had gone then reinstalled. I then tested the screen resolution of my monitor a HP w1907v, smaller resolutions made no difference but opening it up to max did. When I wish to open a RAW file click open click the photograph and in the bottom file format box make sure you are asking for RAW files to be opened and 'bingo'. This upgrade for PSE 8 has the latest CameraRaw on it but the problem was there from the first installation so perhaps it is a combination of screen resolution and making sure the file format for opening is specified. So after hours of effort a satisfactory outcome. I probably confused the issue by installing the plug-in when there was no need. PSE 8 will last me a long time!!!

  • Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

    Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

    update the adobe program that needs cr 4.6+,  http://www.adobe.com/downloads/updates/

  • Nikon AW110 .NEF Files in Camera Raw / DNG Converter

    I'm a bit new to NEF, and even RAW to be honest. But far as I can see both DNG converter 8.2 and Camera Raw (newest) is not happy with the .NEF Files from my Nikon AW110 camera. It won't open them.
    Is this something that will just be updated in DNG or RAW sooner or later? I have an early release of the AW110 and naturally there is not too much support out for it yet.
    Please let me know if I should be able to open these or not. It's no worry if there's nothing i can do about it yet, I just want to make sure my camera raw or photoshop isn't broken.
    Trying on OS X 10.9 (and 10.8) Photoshop 14.1.2 and Camera Raw 8.2.0.94
    Thanks guys

    ACR/DNG Converter 8.2 were released mid-Sept, which seems to be about the time or just before the Nikon 1 AW1 was available, so you’ll need to wait until at least the next release of ACR 8.3 / DNG 8.3 sometime in during late-Nov to early-Jan timeframe, I’d expect, unless there is something strange about that camera that requires extra time.
    The first place ACR/DNGC are available is the release-candidate at Adobe Labs, so check back there from time-to-time:
    http://www.adobe.com/
    Here is the list of currently supported cameras, where the Nikon 1 series is just above the Olympus section:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Automatically open raw files in camera raw

    PLEASE READ the post before posting a reply as i may have already tried something you think might be the fix.
    basics: latest version of all adobe CC 2014 products including bridge 6.1.0
    win8.1
    after i've imported raw files (either RW2 or CR2) it USED to be that when i double clicked on a file it automatically opened camera raw and then after my edits and i clicked OPEN IMAGE it would then open in pshop.
    now they open in windows image viewer (sic)
    SO
    i went to EDIT>PREFERENCES and changed the specific camera files to open in pshop 2014. (as there's nothing that allows 'open in camera raw')
    so now when i double click on a file in BRIDGE it opens PHOTOSHOP and THEN goes to Camera Raw 8.6
    BUT...
    i want to DOUBLE CLICK and open CAMERA RAW without going into pshop.
    yes i know if i right click on the image it offers 'open in camera raw' which works, OR i can Ctrl+R and they open just fine,
    but where can i set it so a double click (which is faster) does this automatically?
    thanks in advance.

    What kind of TIFFs?  Are they multi-layered, for instance?  ACR will not open layered files.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Adobe Bridge CC with OSX Yosemite - and i cant open RAW Files in Camera Raw. Does anybody have the same Problem?

    If i try to open any File with Camera Raw exactly nothing happens.

    What exact camera make and model?
    What specific, exact version of Adobe Camera Raw (ACR) plug-in?
    What specific, exact versions of Bridge and of Yosemite?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Cannot open PSD or TIFF files in Camera Raw

    I made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
    Message title was edited by: Brett N

    PSD files in Camera Raw:
    1.— Stay the heck away from Bridge!
    2.— Instead of right-clicking on anything, go to Photoshop's File menu and Select the Open menu item.
    In the dialog box that opens, find your PSD file, select it, then go down to the bottom of the box and select Camera Raw in the dropdown menu next to Format:
    TIFF files in Camera Raw:
    Just make sure to enable TIFF support in Camera Raw Preferences, then open it like you open any JPEG or raw file:
    Message was edited by: station_two

  • P65+ RAW files with camera RAW - Not yet

    Folks,
    I'm just wondering if I'm alone here cos I can't find any mention anywhere online. Just had a shoot come in froma photographer (I'm in an ad' agency and we get all types of files from various photographers) shot on a P65+ back. The RAW TIFs are about 55MB each and when I bring them into to Photoshop or Lightroom to process the image to photoshop for retouch, it shows the four sensors from the camera back.You can just see it at this size, (client confiedential prodcut shoot I've had to blank out)
    A close up shows the centre of the four sensors...
    My workaround is to go back to CaptureOne and process the files to DNG, then bring them into Lightroom, but my DNGs become 110MB, twice the size the original RAW.
    I know it's a fairly new digital back, but surely I'm not alone with this problem? Cos that would be really lonely ;-)

    Mark Kenny wrote:
    I know it's a fairly new digital back, but surely I'm not alone with this problem? Cos that would be really lonely ;-)
    Correct...as far as I know, Phase still needs to get certain info out to Adobe in order to address the 4 quadrants. As I understand it, there are actually 4 "pipelines" of data being pulled off the chip. Think of them as arrayed data streams...none of them is gonna match "exactly" so Phase tucks calibration data in the file. Camera Raw can (as far as I know) read the data from a P 45+ so I don't think it's a question of if, but one of when...it didn't make the 5.4 update, maybe it'll make the next one (I don't actually know).
    However, depending on the camera in use, you may indeed want to do the tiff > DNG conversion to take advantage of the Lens Correction capabilities of Capture One. I use a Phase 645 with Phase lenses that benefit from the DNG conversion.

  • Can't open Nikon D300s files

    I have Vista Ultimate, CS4 64 bit.
    I downloaded the Windows 5.5 CR update.
    I extracted the files. There is an extensions folder, ar resources folder, installerResults.dll and Setup.exe.
    I clicked on setup.exe. Get Do you want to run this files ...
    I run it and get a window with:
    Photoshop Camera Raw (64) bit
    Clcik next to install the following updates
    Photoshop Camera Raw (64bit) 5.5
    Photoshop Camera Raw 5.5
    I click next.
    It says:
    ! Application Running
    Please close the following application and retry to continue installing update:
    Adobe Bridge.
    But Bridge IS NOT RUNNING.
    Nothing is. Reboot and try again and wind up at the same place.
    So this doesn't work.
    I look at the Readme file on Adobe to try the manual method.
    It says to open the download file and double click CameraProfiles.dmg and follow the onscreen instructions.
    I don't see this file so I can't proceed this way either.

    robirdman1 wrote:
    I click next.
    It says: ! Application Running
    Please close the following application and retry to continue installing update: Adobe Bridge
    But Bridge IS NOT RUNNING.  Nothing is.
    Look in Task Manger > Processes. You will probably find Bridge IS running. End the process there and you should be OK to install.
    This is caused normally by having Bridge set in Preferences to load at startup and run in the background. One part of Adobe thinks this is a good idea but they didn't tell the people who wrote the installer.
    I think it's a terrible idea and always make sure that option is unchecked.

  • I can't open nikon D750 NEF files with adobe dng converter 8.7

    I have downloaded adobe dng converter 8.7 to open NEF files from my new nikon D750 but it not works. The program do not recognice the files. Do you know how solve this problem?

    You have to launch and run the Adobe DNG Converter on each batch of raw files you want to convert to raw DNGs.
    You have to point it to the folder containing your raw files.  It does NOT work on individual raw files; it simply won't see them.  It works only on folders.

  • Opening RAW file into Camera Raw (help please)

    Hi,
    Brand new to Photoshop (free trial started 2 days ago) and am having significant difficulties with overall program.  One major issue is the ability to open my photos into the Camera Raw program.  One tutorial mentions to right click and convert it to Smart Object in order to launch the program but this does not seem to work for me.  It merely adds a small image into the corner and becomes a "Smart Object Thumbnail".  I don't use Bridge (heck, I don't even know what Bridge is!) and am merely opening up a file into Photoshop directly.
    My images are in a raw format, does that make a difference?  Do photos have to be in jpegs to use that program? 
    Thanks.

    Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
    Adobe Camera Raw (ACR) requires a lot of reading to master.
    Raw files should automatically open in ACR when you double-click on them.  ACR can be hosted either by Photoshop or by Adobe Bridge, and the respective application will launch when you double click on the raw file and present you with your file open in ACR.
    The purpose of ACR is to convert the raw file into something you can see and use.  Raw files are very, very dark gray-scale images with nothing a human eye can discern as color.
    Forget about "Smart Objects" for now, that is something you will only be able to understand or use until you are proficient with Photoshop, many months or a couple of years from now if you are truly dedicated and take a Photoshop course at a community college near you.
    You cannot open a raw file in Photoshop directly.  It has to be converted in ACR first.

  • Open raw file into camera raw ?

    Before I used Adobe Bridge to keep track of my photos, and that program has a function where you can right-click on a raw file and choose to open the photo in camera raw. I can't seem to find this function in Lightroom 1.3 Is it there some where ?

    Yes, I do, and I just answered a similar a few hours ago.
    You use "Import" to attach files to the LR catalog, as a general rule. You can, at least on a Mac, assign LR to open .crw files, for instance and it will import that way.
    I presume you're on a PC?

  • I can not open a crw image in photoshop camera Raw.

    When I go to open a CRW Image in CS5,Bridge It will not open.It says Could not complite your request because it is not the right kind of document.Need help bad.
    PS How do I tell what version of Camera Raw I have.By the way I have a Canon EOS 10D camera.Thanks.

    Within Photoshop go to the "About Plug-in…" menu item just below "About Photoshop" to find the Camera Raw version number.  On which menu that is depends on your platform, Macintosh or Windows, which you neglected to mention.
    Raw files from your camera have been supported since version 2.0 of Camera Raw for years and years, so it's not a question of your version of ACR.  Any version of ACR that runs in CS5 should open those files.
    I suspect your raw files are damaged (corrupted).

Maybe you are looking for