Can't open one website on any browser on mac
I have a MacBook Pro running Yosemite 10.10 (up to date)
I also have Safari 8.0.2 and Chrome 40.0.2214.91 (64-bit).
I have been trying to open a website (home insurance) for months now and assumed the website was just down every time I checked.
Yesterday I had my wifi on my mobile (iPhone 5) switched off and the site loaded which led me to believe the issue is with my wifi and not the website itself.
I have cleared all my website data, deleted my safari cache.db folder, I've turned off and on the mac firewall as well as the one in my routers admin panel.
I don't see any proxy settings.
I'm not sure what else to try?
I get the same problem on Safari and Chrome.
Safari says it can't establish a secure connection and Chrome says the connection was interrupted Error code: ERR_CONNECTION_RESET
Does anyone have any ideas as to what might cause this?
From the menu bar, select
▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?
Similar Messages
-
Can't open random websites in any browser
Put some serious hours into finding a solution for this problem last night, just obsessed now.
The two websites in question are www.iphonehacks.com and www.dropbox.com
As per an older post by Linc Davis I booted into recovery mode and had no problem opening the sites in Safari.
By the way, the problem is system wide, all browsers are affected. I can also connect to the sites with my iphone 4s while on my wi-fi
I have systematically removed extensions and attempted to match the Safari preferences I saw while in recovery mode to no avail.
I have run EntreCheck and these are the results if that's helpful.
Hardware Information:
MacBook Pro (Retina, 13-inch, Late 2012)
MacBook Pro - model: MacBookPro10,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 7:32:33
Disk Information:
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
HD (disk0s2) /: 120.47 GB (25.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS3.plist
Launch Agents:
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
User Login Items:
LaunchBar
iClipboard
iTeleport Connect
3rd Party Preference Panes:
Flash Player
iClipboard
Internet Plug-ins:
AdobePDFViewer.plugin
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Google Earth Web Plug-in.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
VLC Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
HD: Disk size: 120.47 GB Disk used: 95.35 GB
Destinations:
Ext [Local] (Last used)
Total size: 249.72 GB
Total number of backups: 1
Oldest backup: 2013-10-25 06:42:38 +0000
Last backup: 2013-10-25 06:42:38 +0000
Size of backup disk: Too small
Backup size 249.72 GB < (Disk used 95.35 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% WindowServer
2% EtreCheck
1% fontd
0% MenuTab for Facebook
0% coreservicesd
0% iClipboard
0% notifyd
0% loginwindow
0% cookied
0% warmd
Top Processes by Memory:
360 MB mDNSResponder
147 MB softwareupdated
123 MB com.apple.IconServicesAgent
106 MB MenuTab for Facebook
90 MB Finder
90 MB Dock
82 MB mds_stores
74 MB WindowServer
74 MB Safari
66 MB LaunchBar
Virtual Memory Statistics:
3.97 GB Free RAM
2.63 GB Active RAM
538 MB Inactive RAM
895 MB Wired RAM
551 MB Page-ins
0 B Page-outsZebcreed
Did u resovle this issue?!?
In Safari, Yahoo.com opens when u start the brower it the Homepage. Also,YouTube opens but gives an error when try to play a video. Firefox will open the "Google" search and that it. Chrome ( just installed it 2day because i thought it was a Safari issue)will open any URL w/ google.com or apple.com in the address.
The problem started after i followed a series of steps given on a link see below:
I have had no success in running an update "Software Update can’t connect to the update server" which i have tryed on two different networks. Both are using a FritizBox Fon Wlan wireless router.
My system is a:
Model Name: MacBook
Model Identifier: MacBook7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB71.0039.B0B
SMC Version (system): 1.60f6
How to Clean Up/Speed up Your Mac
Regular MaintenanceOne-Off Maintenance
Edited by Andrew, Teresa, Raymond Madison, Charles85 and 6 others
Macs are epic. They are fast, look good, and are high quality. However, they don't like having a full hard drive. This guide will help you to free up that extra space.
Method 1 of 2: Regular Maintenance
1
Delete apps that you do not use. Drag and trash the unused apps. Manually search and remove application-related preference and support files, or try to use uninstaller tools like CleanGenius or AppZapper to uninstall applications.
To make sure that you delete any application bundles or additional, read this article on how to uninstall files on a Mac. You'll need to search Finder and look for File Name in your search criteria.
2
Empty out the trash. It may sound obvious, but clearing out the trash will help your computer run smoother. Don't use the trash as a landing dock for temporary files; only place files in your Trash if you're sure you want to delete them.
3
Use programs like XSlimmer to clean up the obsolete code from apps. Maintenance programs like XSlimmer checks which code your computer needs for a given program and removes the rest.[1] This will reduce the space taken up on your disk and get your computer running faster.
4
Compress and archive your old files. Provided your files aren't already compressed, compressing them will make them dramatically smaller, freeing up extra space on your hard drive. In order to find out how to compress files on a Mac, click here.
Once your files are compressed, move them to an external hard drive to on a CD for storage. Keeping files you don't regularly use on your computer will slow it down.
5
Clean up system logs and temporary files periodically. Your system should automatically run UNIX maintenance scripts, but some earlier versions of Mac OSX only run these scripts between 3 and 5 AM, during which time most computers are either asleep or shut off, depriving your system of regular maintenance.[2]
Download a free app like OnyX to do scheduled maintenance and clean up system logs and temporary files.
If you want to clean up system logs and temporary files manually,
Access terminal by navigating to Applications → Utilities → Terminal
In Terminal, type in "sudo periodic daily weekly monthly" and hit Enter
Type in your Mac admin password
Wait for your system to run the maintenance, after which you'll be returned to Terminal
6
Remove iOS backups that are old and no longer up to date. An iPod, iPhone, or iPad will automatically run a backup on specific files when you plug the device into your computer. Trashing older, obsolete backups will help free up space on your computer.
To access the backups, navigate to Home → Library → Application Support → MobileSync → Backup folder. Locate the newer backups and the older backups. Delete the older backups.
7
Periodically check your ~/Movies/, ~/Music/, and ~/Downloads/ folders. Drag unneeded files to the Trash. Apps like to save here, and this can result in used space, so be vigilant about what gets put in here.
8
Delete any unused or old DMGs, iPhone software bundles (IPSW), and similar files. These files are often unnecessary and take up valuable space on your device. Get rid of them if you no longer need them.
Deleting DMGs: DMG files are disk images. Cnce you've mounted your disk image and installed your app, you're free to eject and trash your DMG. To eject, simply drag the mounted volume to the trash.
Deleting IPSW: Navigate to Library → iTunes → iPhone Software Updates and locate any unused bundles. -
Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
After 10.9.4 update can't access certain websites from any browser
I just updated to 10.9.4 Saturday evening the 26th. Sunday morning I noticed that I was unable to get to some websites but they worked from the ipad and other devices in the house so I rebooted thinking something odd was going on post update. It happened again a few times until I realized a pattern. I can not get to facebook, mail.google.com, google.com or most SSL only websites. Sites that redirect you to an SSL URL just sit there until they eventually time out. I can go to cnn.com but I can't load apple.com
if I try to go to bing.com which surprisingly doesn't force you to SSL it loads every time. This is reproducible in SafarI, Firefox, and Chrome consistently. Rebooting no longer resolves the issue and I couldn't even come here to post this from the iMac because the discussion website eventually forces you to use SSL. (Actually, while posting this that URL eventually appeared after a very long wait. Other websites eventually time out entirely. Safari fails to load Facebook at all)
EtreCheck version: 1.9.12 (48)
Report generated July 28, 2014 at 12:31:05 AM EDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2560 x 1440
DELL 2208WFP 1680 x 1050 @ 60 Hz
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 1:9:53
Disk Information:
APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 999.35 GB
Recovery HD (disk1s3) <not mounted>: 650 MB
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
Hitachi HDS723020BLA642 disk2 : (4 TB)
disk2s1 (disk2s1) <not mounted>: 66 KB
G-RAID (disk2s3) /Volumes/G-RAID: 4 TB (1.38 TB free)
USB Information:
Seagate Backup+ Desk 3 TB
EFI (disk5s1) <not mounted>: 314.6 MB
disk5s2 (disk5s2) <not mounted>: 3 TB
Boot OS X (disk5s3) <not mounted>: 134.2 MB
Seagate Backup+ Desk 3 TB
EFI (disk4s1) <not mounted>: 314.6 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
SCM USB3.0 CF SD
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
LaCie eSata Hub
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded]at.obdev.nke.LittleSnitch (3883 - SDK 10.8) Support
[not loaded]com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[loaded]com.adobe.fpsaud.plist Support
[loaded]com.bombich.ccc.plist Support
[running]com.cisco.anyconnect.vpnagentd.plist Support
[loaded]com.google.keystone.daemon.plist Support
[loaded]com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[running]com.adobe.AdobeCreativeCloud.plist Support
[running]com.brother.LOGINserver.plist Support
[running]com.canon.MFManager.plist Support
[loaded]com.cisco.anyconnect.gui.plist Support
[loaded]com.citrix.AuthManager_Mac.plist Support
[running]com.citrix.ReceiverHelper.plist Support
[running]com.citrix.ServiceRecords.plist Support
[loaded]com.google.keystone.agent.plist Support
User Launch Agents:
[loaded]com.adobe.AAM.Updater-1.0.plist Support
[loaded]com.adobe.ARM.[...].plist Support
User Login Items:
iTunesHelper
Arq Agent
VLCStreamer
Dropbox
ImageTransferUtility
WirelessCameraService
AdobeResourceSynchronizer
Internet Plug-ins:
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.6 Support
AdobePDFViewer: Version: 10.1.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
Citrix ShareFile Sync Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
fuse-ext2 Support
Printopia Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
G-RAID: Disk size: 4 Disk used: 2
Destinations:
Seagate Backup Plus RAID [Local] (Last used)
Total size: 5
Total number of backups: 62
Oldest backup: 2014-01-20 04:06:23 +0000
Last backup: 2014-07-28 03:53:23 +0000
Size of backup disk: Too small
Backup size 5 < (Disk used 2 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2%Google Chrome
2%WindowServer
1%fontd
0%firefox
0%hidd
Top Processes by Memory:
279 MBFinder
275 MBfirefox
221 MBcom.apple.ShareKitHelper
188 MBWindowServer
180 MBcom.apple.IconServicesAgent
Virtual Memory Information:
3.43 GBFree RAM
3.24 GBActive RAM
376 MBInactive RAM
975 MBWired RAM
922 MBPage-ins
0 BPage-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can't open one website on macbook air wifi
http://ijcmr.weebly.com
The name of website given above cannot be accessed on wifi connected to mac, but i can access it when i connect my mac with modem with data card (net setter).
please help me why such thing happening with me??From the menu bar, select
▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses? -
I can only open one Firefox browser window. When I click the firefox icon from desktop or taskbar to open up another browser window it does not open. I am ablt to open up new tabs within the one window.
Have you tried: click Firefox button > New Tab > New Window '''''OR''''' CTRL+N '''''OR''''' File > New Window (if using the Menu Bar)
Once open, Firefox locks the Profile that is in use and you can not open another window with that Firefox version and Profile combination using the Windows Desktop icon or the Windows Programs list. -
Can't open a website that supports only Internet Explorer
hi, i can't open a website that supports only Internet Explorer (high-q.co.il - which i need badly for my bachlor dagree)!!
my mac runs OS X 10.9.2 system operation. i cant open this site with: chrome,opre,firefox,safari...
what should i do?Try changing your browser agent using the Developer menu your browser preference can enable.
If that doesn't work, complain to your college dean that the website violates accessibility laws, and should follow http://www.w3.org worldwide conventions to ensure accessibility. Do not enter any personal information if you are forced to use Windows to browse the website, as it may be insecure.
https://discussions.apple.com/docs/DOC-2741
offers several solutions to run Windows on your Mac. -
Safari can't open Google website
For the last couple of days, my default search engine (www.google.com) was not searching, and giving me following error:
Safari can’t open the page “http://www.google.com/” because Safari can’t connect to the server “www.google.com”.
I went through pages in support about problems with third-party plugins. I've tried un-checking "Enable plug-ins"; Resetting Safari; Emptying Cache; Re-starting Safari and computer, nothing has worked. Other search engines are working e.g. bing, yahoo. I can't open any of google websites from .com or .co.uk or gmail. I've just tried using Firefox and it also can't open google websites.
I'm using Safari 5.0.3 (5533.19.4) on a Mac OS X 10.5.8.
I had Glims installed on my machine, which I just un-installed it; re-started; re-set safari, but still can't open google website.
As far other websites are concern, so far all the websites which are in frequent use can open. Is there problem with Google, Safari/Firefox (browser) or my mac (virus or something)?
Thanks a lot everyone.
PS: Oh yes. I got update on Safari yesterday, is that causing any issues?I had the same problem too.
I searched by using bing.com (fortunately MS search engin has helped me )
I found a archived post https://discussions.apple.com/message/11061084#11061084
I did what Carolyn said and I also checked the PeerGuardian app
but I don't think it's because of this app that my connection wasn't possible, because I rarely use it.
Et voilà, everything works now.
I'd like to thank Carolyn and Rave for allowing me to do not format my dear iBook G4 that I haven't formated for over 3 years!!! (I've done the whole backup of my iBook) -
i can't open "special characters" in any Edit pull down menu. i have a constantly flashing empty window labelled 'characters' that i haven't been able to stop.
it appears every time i click on anything. any suggestions? tru thanxI, too, have found Bridge very unstable. I find this to be extremely disappointing, seeing as it's literally the most expensive piece of software I've ever purchased for personal use. I've seen these two symptoms:
1. When running in full screen mode, Bridge crashes periodically. This happened on Vista, so I blamed Vista (of course), but even after regressing to XP SP2, I see the same symptoms.
2. Although I didn't see this on Vista, running on XP I see the problem described earlier in this thread, where clicking on a thumbnail displays the wrong image preview. When this happens the image displayed is one from a different folder! I solve the problem by clearing the cache, and it's OK for a while, but the problem keeps returning.
3. Even when exiting cleanly from Bridge (using File->Exit), Bridge often forgets where I was working in my previous session. I need to re-navigate from the very top level directory down through the hierarchy to my photo directory.
Again, it's very disappointing to invest so much in a single software package only to see such basic operations malfunction. -
Hey,
I can't view some content of certain websites on any browser. I'm running on 10.9.2 and I have tried this on Chrome, Firefox, Opera and Safari and nothing seem to work. For instance, I can't view the videos on 11secondclub.com or login to digitaltutors.com
Any thoughts what the problem might be?
Thanks!XML parsing error may have to do with a corrupt cache or profile.
*[http://mzl.la/1xKrH3y]
Please make sure that this does not happen in a new profile to make sure that this is not the issue: [[Use the Profile Manager to create and remove Firefox profiles]] -
Java(TM) Platform SE binary doesn't work on any website, on any browser
I'm on Windows 7 Ultimate 32bit, everything's working fine, I always keep my system clean, I also keep the registry as clean as possible, I have a problem from at least a couple of months, so "Java(TM) Platform SE binary" doesn't work on any website, on any browser, it always crash, I tried everything, I mean EVERYTHING! I've uninstalled and re-installed java a thousand of times, completely uninstalled, removed all files, all registry entries, nothing seems to work..I always get the same message..
here's the error signature:
Firma problema:
Nome evento problema: BEX
Nome applicazione: java.exe
Versione applicazione: 7.0.400.43
Timestamp applicazione: 521c3bf2
Nome modulo con errori: ntdll.dll
Versione modulo con errori: 6.1.7600.16385
Timestamp modulo con errori: 4a5bdadb
Offset eccezione: 0001d78d
Codice eccezione: c0000409
Dati eccezione: 00000000
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: a091
Ulteriori informazioni 2: a0912fac5db1285ab245a51982c0da6c
Ulteriori informazioni 3: 0ef4
Ulteriori informazioni 4: 0ef461fa84dd27e3340858dc9ed3bcb3
and here's a video (made by me) of the problem: Java(TM) Platform SE binary stopped working - YouTube
can anyone help me find a solution?
ThanksLooks like you have conflict with your java home and you are running 2 different JREs. Keep the latest and try launching EM console again and post the exception if you get any.
Thanks,
Vijay -
Why I can not open curtain websites?
why I can not open curtain websites? Anyone else have this problem?
Probably sites about PCs - you know, the ones that cover Windows.
Seriously, what Web sites can't you open? -
When I download word docs my MacBook is adding the flv extension onto the doc extension and I can't open the doc. Any ideas?
Go to the main Library folder and look for a folder called Application Support / Microsoft.
There are a few folders in there, and you may have to do some digging. In one of them (mine is called MAU2.0), there should be a file called Microsoft Autoupdate. Open it.
It looks like this:
check the button for manual updates.
That should let you open the apps without triggering an automatic update. -
Mail: I can only open one email at a time
Using Mail, I have a very strange phanomenon: I can only open one email at a time. E.g. when writing a new email, I cannot open another email for reference. I need to close and save the new email as a draft before being able to open another one.
It would be great if somebody could help me with this, thanks!Hi Cocolores,
If you choose File > New Viewer Window from the menu bar in Mail, you can have as many email messages open as you like.
I hope this information helps ....
Have a great day!
- Judy -
iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: WoildbillI just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!
Maybe you are looking for
-
Unable to deploy from Eclipse - Runner class cannot be initialized
Hello two days ago, I installed the newest versions of Glassfish Tools together with the newest Eclipse Luna SR1 when trying to deploy, I am getting the following error message: org.glassfish.tools.ide.admin.CommandException: Cannot initialize Runner
-
Urgent. Badi or user exit for ML81N transaction
Hi! Currently I am working on the transaction LM81N. I am looking for a user exit or BADI before save (commit work). I need to modify the XIMSEG table where this table is updated in the code: FORM SET_XIMSEG_ACC using p_rcode. *& Form SET_
-
Tracing / Profiling SQL statements in Sybase
Hi Guys, I would like to capture the SQL statements that have been fired from a web app (bit like SQL Server's profiler). Is there such a tool / facility?Please note that I cannot use dbcc commands like traceon as DBA's wont grant me sa rights (in de
-
Is there a Driver or Workaorund with Dialta 1610 in OSX 10.6?
Is possible to print to a Konica Minolta Dialta 1610? Since I have two Konica Minolta printers given to me by my boss, I know one is not working in mac at all. The PagePro 1380MF is GDI printer with no workaround besides installing windows in my Mac
-
Error message06076 -Materials of requisition 15863 item 10 ordered in full
Hi , I am trying to create a PO with reference to a particular PR. I get an error message "Materials of requisition 15863 item 10 ordered in full". Can anyone please suggest me the reason for this error and how to overcome it. Thanks Regards, Vinayak