Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

Similar Messages

I can't find iPhoto after upgrading to Snow Leopard...

Usually, there is an icon when I open photobooth but its not there. Then I tried looking in finder to see if I even had it and I don't. Snow Leopard should come with iPhoto right??

I have the same issue. iPhoto just disappeared after I upgraded from Leopard to Snow Leopard. I have the install CDs for Leopard, but it doesn't look like I can install iPhoto separately. Under the "Optional Installs" directory there's an option to "Install Bundled Software Only" at 2.7 GB. Won't this overwrite the Snow Leopard versions and cause trouble? I suppose I could do a clean install of Leopard, and then install Snow Leopard, but I'm afraid after waiting on this I might just lose iPhoto again. I'll probably try it anyway. The second CD seems to only have X.

Cannot open Aperature after upgrading to Snow Leopard

I upgraded my macbook pro to snow leopard. Now I cannot open my Aperature (2.1.4). Anyone else have this problem? I keep getting an error box telling me that Aperature has shut down unexpectantly. I try to restart it and all I get is the same error box.

"hmmm, did you relink the template from a new location, or did you put it in the same location and then relink it" What do you mean by relinking? I did put it into the same directory. When I bring DVD SP up without loading this project, I have the menus and can double click on the menus to to bring it up in the viewer. At this point, I think I should try to do a new project to see if this error repeats itself. As long as I can build and burn on my Mac Book Pro, I am OK. Is it possible that the file itself became corrupted somehow? Just a thought. Thank you for your help.

Can't open emails since upgrading to Snow Leopard

Ever since I upgraded from Leopard to Snow Leopard, I have been unable to open emails, new or old. I get the spinning gear and the 'loading' indication. Simultaneously, I get the spinning gear as the mail program attempts to acces my mac account (95% of my emails come through my verizon POP acct.) Any ideas on how to fix this?

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-can't shut it off properly...frustrated. What fix can I download?

After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?

After upgrading to snow leopard my MacBook Pro will freeze when I go to system Pref or it has been running for 40 minutes-making it impossible to close app's or power off properly...so frustrated. What fix can I download?

Can´t open LR after upgrade to 5.3 without entering a licens key

Can´t open LR after upgrade to 5.3 without entering a licens key

I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

SqueezeAce wrote:
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
On the second screen, under the Utilities menu is a Password Reset, use it.
Step by Step to fix your Mac
What this will do is reset the password and the user account permissions in the process.
You might have problems with Keychain afterwards, to fix that.
https://support.apple.com/kb/HT1631 https://support.apple.com/kb/TS1544
If your still having trouble, look through these User Tips
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

My Creative SBS250 speakers no londer work after upgrading to Snow leopard. Where can I find the driverinstalling

My Creative SBS250 speakers no longer work after upgrading to Snow Leopard. Where can I find the driver? Thanks

Everyone in my household who has upgraded to Snow Leopard has had the same problems with program crashes and the computer "forgetting" registration codes.
In fact, after re-entering codes, and then upgrading to 10.6.1, we had to re-enter them again because it forgot (again) that we had bought/registered the software. It was a lot of fun digging through old emails and such looking for the codes, let me tell you.
I'm pulling a Vista and downgrading my computer back to 10.5.x. That was stable and remembered my software, at least.

Bento won't open after upgrading to Snow Leopard?

Bento will not open since installing / upgrading to Snow Leopard 10.6 -- just simply tries to start up and quits immediately. Any suggestions other than trashing the existing application and restoring / reinstalling from my original software discs that came with my new Mac Book Pro laptop? It was working just fine prior to upgrading to Snow Leopard yesterday.

Download the updated version of Bento to use the application with Snow Leopard. This should fix the problem!

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Print booklet fails after upgrade to Snow Leopard

After upgrading to Snow Leopard I had to reinstall the driver for my HP 4000N printer. Now all of my booklets print with the right side truncated in the middle as if the paper were 8-1/2 x 8-1/2 instead of 11 inches wide. The InDesign preview shows it correctly. It printed fine yesterday in OS X 10.5, InDesign CS3. Does anyone have advice?

I did a clean install of Snow Leopard on a new disk and InDesign has the same problem of clipping a landscape layout booklet.
I bought a new HP Laserjet and it has the same problem.
I downloaded a trial version of InDesign CS5 on the new system with the new printer and it has the same problem.
InDesign just thinks the paper is only 8-1/2" wide in the Print Booklet procedure and it clips the printing at 8-1/2". It will print a normal landscape page fine. It shows the Preview of the booklet correctly. I can save the booklet as a PostScript file and Preview will print it fine. I've been printing the same booklet under 10.5 for several years without problem.
InDesign just won't print the booklet correclty under Snow Leopard.

Logic 8 (8.0.2) crasches after upgrading to Snow Leopard (10.6.8)

Hi, everyone! I hear some of you have problems shutting down Logic after upgrading. I have a similar problem. Logic 8 (8.0.2) crasches after upgrading to Snow Leopard (10.6.8), when choosing "open" . This doesn't happen when I choose "Open Recent". When i open a project, I can't close it without saving first, though I havn't changed anything. Any clues?
/Anders, Stockholm, Sweden

Hi there CANTONOR,
You may need reinstall Quicktime 7 and restart your copmuter. I would recommend taking a look at the information found in the article below.
iPhoto '08: Viewing videos in iPhoto '08 on Mac OS X v10.6 Snow Leopard may need QuickTime 7
http://support.apple.com/kb/TS3003
-Griff W.

Can't open Pages after upgrading to snow leopard on 10.6.8

Similar Messages

Maybe you are looking for