Can't open PC .fla file on Mac

I have searched archived messages and although there have
been posts about this, no one seemed to have any answers. So, I
thought I would ask again. Oh, and please don't laugh!
My company had a web site built back in 1998-1999. The
outside person they hired to do the site created a Flash animation.
I do not know what version was used or for sure what platform (PC
or Mac). I do have the .fla files as well as the .swf files to work
with, but when I try to open them I get this error message.
"This document contains embedded objects that were created
with Microsoft Windows version of Flash. These embedded objects
must be deleted before opening on a Macintosh."
I am trying to open the .fla files using an old Mac version
of Flash 4. (Yes, I said please don't laugh!) My company will not
allow the resources to buy an upgraded version. Can anyone tell me
why I am getting this message? How I can open these files? or
ANYTHING I can do? Thanks for the help.

i think your company's lack of resosurces allocated to
software updates has finally caught up with
them :p
The only thing you can do is find flash 4 - install it on a
pc - open the FLA and well...come to
think of it - i have no idea what that error could mean - FLA
files are cross-platform. Original
author must have embeeded windows video files or something -
i cant even remember what flash 4 did
or did not support. Flash 4 didnt have a dependant files
feature (i dont think).
chances are the error is generic and the real issue is that
the file is old and possisbly corrupt. I
dont have flash 4 anymore but you could post the fla to see
if it can opened at all - on PC and/or
MAC - then try downloaded the 30-day trial of flash and
editing it - or search ebay for flash 6 or
even 7 at a cheap cost.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Jalk67 wrote:
> I have searched archived messages and although there
have been posts about
> this, no one seemed to have any answers. So, I thought I
would ask again. Oh,
> and please don't laugh!
>
> My company had a web site built back in 1998-1999. The
outside person they
> hired to do the site created a Flash animation. I do not
know what version was
> used or for sure what platform (PC or Mac). I do have
the .fla files as well as
> the .swf files to work with, but when I try to open them
I get this error
> message.
>
> "This document contains embedded objects that were
created with Microsoft
> Windows version of Flash. These embedded objects must be
deleted before opening
> on a Macintosh."
>
> I am trying to open the .fla files using an old Mac
version of Flash 4. (Yes,
> I said please don't laugh!) My company will not allow
the resources to buy an
> upgraded version. Can anyone tell me why I am getting
this message? How I can
> open these files? or ANYTHING I can do? Thanks for the
help.
>

Similar Messages

  • I Can't Open a ".fla" File

    I was sent a flash file via email and now I cant open it. My computer is asking for an application to open it. What do I do? It was probably created on a pc. Thanks in advance!
    Message was edited by: DJ FROM CALI

    An FLA file is a Flash source file that contains all the animation and graphics. To manage this file you should have Macromedia Flash MX 6 or higher installed on your computer.
    To open an FLA file in Macromedia Flash editor you should select "File/Open" from the top menu and browse to the location of your FLA file. A simpler way to open your file is just to drag and drop it from your file browser to your Macromedia Flash editor window. Also, if FLA files on your computer are based on the Macromedia Flash software, you can just double click it in your file browser and this file will be opened and ready to use.
     Cheers, Tom

  • Help - can't open a fla. file

    I have created a fla file and I was working on it today when
    flash crashed and since then every time I open that fla file, flash
    crashes again! any ideas? I have been working on this file for more
    then a week and I was just about to finish it!!! HELP!

    Don't mean to sound bad but you should have backed up your
    file during the week, also save as new file with V2 at the end of
    name just so that if it gets screwed up you always have the other .
    In terms of fixing your file, have you tried opening another
    fla file and seeing if it is just flash prog that has a problem and
    not file. Also if possible can you try opening the fla on another
    computer?
    jon

  • Flash CS3 crash when opening a .FLA file on Mac OSX

    I'm not sure if I'm the only one having this problem. I've
    experienced similar issue with Flash 8 on my Mac OSX. I was
    expecting CS3 will fix these but I'm wrong.
    The problem is: Flash will randomly crash when I try to open
    a FLA source, or when I try to publish the file to a SWF file. It's
    not always happening, it's like I'm ok in the morning but crash
    everytime I open the file afternoon.
    If any one of you had similar issues, please share

    Indeed! I actually love my mac. Its a mac book pro that I
    have had since October of 2006. I have literally had no issues with
    anything since I got it until I installed Flash. 8 crashed every
    now and then - but as I work on a piece today using CS3 - it
    crashes on average every 15 to 20 minutes. There is no reason this
    should be happening. It's completely unacceptable! When you think
    about the price tag they put on the new CS3 suite (web premium) -
    this software should be folding my effing laundry and making me
    margaritas too!
    And you are right! I work at a creative agency where we use
    macs. Adobe has always made their products better on the mac side.
    But this just sucks. They should have held off padding their
    pockets until their product was right.
    Just another company that forgot what quality is. Good
    lookin' out, Adobe!

  • Can't open flash/fla files (with CS4) - might be version issue

    Hi,
    I am trying to edit a website for a friend (built with Flash and XML) and i can't seem to get into any of the .Fla files.
    I don't know if it is my version of Flash (CS4) or the files and not sure how i could test it. Could also just be a CS5 file hence i can't open it.
    Any help or suggestions would be great. Please help i don't know what to do, haha.
    Here is an upload of one of the files i am talking about
    http://www.2shared.com/file/kb2NKm0i/book-verification.html
    I wasn't sure which hosts were allowed so if i messed up please let me know.
    Thanks
    Asher

    Hi Asher,
    You  cannot open a file which is saved in future version such as CS5  version  in Flash CS4 .This is as designed .
    If you need to open a CS5 file in CS4 , You need to save the file as CS4 file  and then open in Flash CS4 .
    Thanks
    Sukhbir
    Flash Authoring

  • Flash crashes every time I open an fla file

    I installed a trial version of Flash CS3. I had a Flash 8
    Professional already installed. Every time I tried to open a fla it
    crashed, so I uninstalled both versions and reinstalled. I still
    have the same problem. I can't open existing fla files or create
    new fla files. This is important to my work so I would appreciate
    any help.
    PC: AMD Athlon 64 Processor 3000+ 2GHz 1GByte RAM
    Graphic: GeForce 6600

    shouldn't adobe help you?

  • I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

    I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
    How can I open old Freehand files on this new Mac?
    Can I still open and work in Freehand on this new Mac?

    Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
    Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
    After this, do an update from the App Store.
    Thats all there is to it.
    For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
    Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
    There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

  • Flash cs3 unexpected file format ... how can I open this .fla??

    Hi there,
    Someone sent me a .fla file that I can't seem to get opened in my Flash CS3 program.  I think it's because it was made in CS4 which isn't backwards compatible with CS3.
    So, now I'm wondering if there is a way I can open the .fla file in CS3.  Better yet, is there some kind soul here that could possibly open the .fla in CS4, and save it as a CS3 and send it back to me?
    I would normally just ask the guy to do this himself but he left on vacation today and I haven't had a chance to try and open the file until now.
    Thanks
    Mike

    upload your fla and post a link.

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Recently updated Mac OS 10.5.8 to 10.6.8 and and can not open exisiting Illustrator5 files or save new files.

    I recently updated my MacBook Pro OS from 10.5.8 to 10.6.8 and can not open existing Illustrator5 files or save new files can someone help?

    I think you have a corrupted upgrade. Do you have a backup of your old system?
    Here's what you should do for now:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hey ilyaz20360341,
    Could you please specify how exactly did you transfer Acrobat from one MAC to other.
    You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
    If you have done the same way, then let me know if you are able to open Acrobat itself.
    Do you get any specific error message while opening a PDF?
    Hope to get your response.
    Regards,
    Anubha

  • InDesign CS5 (Mac OS 10.6) can not open its own file

    I need guidance to open an artwork file that in one hour I have to send to the print shop. InDesign refuses to open its own file.
    Any clue? Adobe, please help.

    Re: InDesign CS5 (Mac OS 10.6) can not open its own file
    Bob and Peter
    Thank your for helping us out. It was really necessary to ask a coworker to open the file and export it in InDesign markup language.
    Three hours later than expected, but it's done!
    We are stuck here. I'm a Master Collection user of CS5, using only Dreamweaver, Illustrator, Photoshop, InDesign, Bridge and Acrobat Pro. (I don't know why I bought the Master's). My coleague former Window user, got a Mac in May and downloaded the trial version of Design Studio Standard Collection of CS5.5. Before expiring, we purchased its license and filled it in the active trial version.
    A couple of months ago we noticed that were missed Plug Ins on his version and contacted Adobe who instructed us to download the whole files again. We never did because it is a pain to get rid of the missing parts of a pre installed trial version etc.
    I will ask Adobe to send a CD disk for his version.
    Regards,
    Junia

  • I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • FLA files between Mac and PC versions of Flash CS3

    Hello, I have a PC at work and a Mac at home and have found
    that there are differences with font rendering in Flash CS3 on each
    operating system.
    I have a Flash application that looks beautiful. However, the
    same .FLA file will position fonts a few pixels differently on my
    mac.
    For instance, I can make a flash file on my PC with perfectly
    positioned fonts and after publishing, these fonts will look
    perfect on both PC and Mac (from the SWF). If I then open the .FLA
    on my Mac the fonts will be slightly off, and after publishing the
    fonts will be off on both the PC and on Mac (from the SWF).
    Has anyone else experienced this problem? Anyone got any
    suggested workarounds or am I stuck?
    This is the only major problem I've had going between the CS3
    programs on my PC and my Mac (I mainly use Dreamweaver and Flash).
    Thanks for any help!

    I have this same problem. Most fonts are vertically
    misaligned after loading a PC-created FLA on a Mac, and vice versa.
    OpenType fonts seem to have a greater baseline shift than Truetype
    fonts. Arial is one of the few fonts that doesn't shift (that I've
    tried). The direction of the shift is upwards from PC->Mac, and
    downwards from Mac->PC. Also, the linespacing changes. On the
    Mac the linespacing is reduced, so multiple lines get bunched
    together. To see this issue, create a new document on either
    platform and place some text. Draw a line at the baseline of the
    text. Save and reload this file on the other platform.
    If you make the text dynamic and click on "show border around
    text," the problem gets a little more interesting. On the PC, all
    text with ascenders and descenders appear firmly within the border.
    On the Mac, the border excludes the ascenders on OpenType fonts, so
    the text butts up right to the border and ascenders poke out the
    top. This is a bug in its own right. I work primarily with Folio
    fonts, and have seen this problem on all of the OpenType fonts I've
    tried. On TrueType fonts I tend to see the bounding box "almost"
    right, but it still just clips the ascenders, and causes a small
    baseline shift.
    I think the baseline shift problem is because the Mac version
    determines the bounding box incorrectly. When you place text using
    the text cursor, it does it according to the font's baseline, which
    is good. But I suspect Flash stores the position of the text in
    terms of the upper left (or any other) corner of the bounding box.
    Because the bounding box is calculated incorrectly (but
    consistently) on a single platform, reloading the file within that
    platform results in perfect positioning. Loading another platform's
    FLA would cause a shift because the font's bounding box is
    different -- it's the same position of the textfield, but the
    displayed text relative to that store textfield position is higher
    up on the Mac than on the PC.
    This problem has really made me regret switching to the Mac.
    have to do all my work inside Parallels now, on Flash CS3/Win,
    because the artists and other Flash developers in the office are
    all on PC. It is a total showstopper for me, and quite aggravating.
    I simply can't check in my FLAs on the Mac side with my Mac
    positioning, because it makes it impractical for anyone else to
    edit my work.

Maybe you are looking for

  • How to attach an image in xls report

    Hi, does anyone knows how to insert an image in excel report?.. We'd been working this for so long and it seems that the report cannot locate/render the image properly .. I hope someone can give me some tips and help.. Thanks .. --original sql code 

  • Javadoc won't display my fields:

    This is the file. Can someone tell me what I'm doing wrong? * <p>This class represents boolean terms as a tree-like structure. An instance of * this class can contain another BoolTerms as its {@link #subterms}. The term * has a top operator, {@link #

  • Purchase Order : printing table in the SAPScript.

    Hi all,         I want to print taxes in the PO . I have created SAPScript from the standard Script MEDRUCK & also attached it to the Appln - EF, in the T-Code : NACT.         To pass the taxes i have written a code and that program i have called fro

  • My iphone 5s cant restore after display blue screen and now in restore mode and shoe error code 40 help me please

    friends help me plz my iphone is crashed and go to bloue screen i conect it to pc and try to restore but erroe 40 is display and cant continue restore what i do now? im in iran

  • Mini thunderport not working

    i plug in my cable it flashes but my tv says it has no signal and it was working fine last night any suggestions?